Engine Oil Pan
SKU:
234976
$83.00
- Type: A large, cast or stamped metal reservoir located at the very bottom of the engine, designed to collect and hold the engine’s lubricating oil when the engine is not running.
- Function: The primary functions of the engine oil pan are critical for the proper operation and longevity of the engine:
- Oil Sump/Reservoir: Acts as the main reservoir for the engine oil, ensuring a constant supply of oil is available for the oil pump to circulate throughout the engine.
- Heat Dissipation: Helps to dissipate heat from the engine oil as it cools after circulating through the hot engine components, contributing to maintaining optimal oil temperature.
- Protection: Provides a protective cover for the crankshaft, connecting rods, and other lower engine internals from road debris and minor impacts.
- Oil Return: Collects oil draining back from various parts of the engine.
- Drain Plug: Contains a drain plug at its lowest point for convenient oil changes.
- Components: Typically includes the main pan body, internal baffling (to prevent oil slosh during aggressive driving), and a threaded opening for the drain plug. It may or may not include the drain plug itself, or the oil level sensor, depending on the specific kit or factory assembly.
- Location: Bolted directly to the bottom of the engine block, forming the lowest point of the engine.
- Material: Often constructed from cast aluminum for good heat dissipation and rigidity, or stamped steel for durability and cost-effectiveness. The choice of material depends on the engine’s design and performance requirements.
- Design: Precisely engineered to conform to the shape of the lower engine block and clear surrounding chassis components. Its internal baffling is crucial for maintaining oil supply to the oil pump, especially during high-performance driving where cornering forces can cause oil to slosh.
Expansion Tank
SKU:
C2C42226
$148.89
The Expansion Tank (C2C42226) is a vital component of the cooling system in Jaguar vehicles. It serves as a reservoir for coolant, allowing for the expansion and contraction of the coolant as it heats up and cools down, thus maintaining the proper pressure in the cooling system.
Expansion Tank
SKU:
C2C6517-5-3
$143.33
The Wire Harness (C2Z4628) is an essential component in the electrical system of Jaguar vehicles. It organizes and connects various electrical components, ensuring efficient communication and operation.
F1 Gear Box Wiring Harness
SKU:
201925
$238.00
- Type: A specialized, complex electrical wiring harness designed exclusively for the control and operation of the Maserati Cambiocorsa (F1) automated manual transmission.
- Function: This harness is the critical electrical link between the Transmission Control Unit (TCU), various sensors, actuators, and the hydraulic pump/unit that governs the F1 gearbox. It provides power, ground, and precise data signals to:
- Gear Actuator/Solenoids: Controls gear selection and engagement.
- Clutch Actuator/Solenoids: Manages clutch engagement and disengagement.
- Gear Position Sensors: Provides feedback to the TCU on the current gear position.
- Clutch Position Sensor: Monitors clutch engagement status.
- Hydraulic Pump Motor: Powers the pump that provides hydraulic pressure for gear shifts and clutch operation.
- Temperature Sensors: Monitors transmission fluid temperature.
- Pressure Sensors: Monitors hydraulic pressure within the F1 system.
- Complexity: Highly intricate, featuring numerous branches, multi-pin waterproof connectors, and specialized shielded wires for sensitive data signals to ensure precise and rapid transmission control.
- Location: Primarily routed around and directly on the F1 gearbox and its associated hydraulic power unit, extending to the TCU, which might be in the engine bay or cabin. It’s exposed to significant heat, vibration, and potential fluid exposure.
- Material: High-quality, automotive-grade copper wire with robust, heat-resistant, and oil-resistant insulation. Connectors are typically sealed and designed for the demanding environment of the transmission area.
- Design: Precisely engineered for routing within the confined space around the F1 gearbox, ensuring secure mounting points and protection from mechanical stress, heat, and hydraulic fluid leaks.
- Compatibility: Essential and specific to Maserati 4200 models equipped with the Cambiocorsa transmission. Not applicable to vehicles with the conventional manual (GT) gearbox.
Fan Assembly
SKU:
C2Z13765
$899.60
- The Fan Assembly (C2Z13765) is a vital component in the cooling system of Jaguar vehicles. It helps regulate engine temperature by providing airflow through the radiator, ensuring efficient cooling during operation.
Fan Assembly
SKU:
C2P16825
$803.99
The Fan Assembly (C2P16825) is a crucial component in the cooling system of Jaguar vehicles. It helps regulate engine temperature by ensuring adequate airflow through the radiator..
Fan Assembly Retainer Clip
SKU:
C2S17736
$46.42
The Fan Assembly Retainer Clip (C2S17736) is an essential component used to secure the fan assembly in Jaguar vehicles. It ensures that the fan is properly mounted, preventing vibrations and potential damage during operation.
Fog Lamp/Position/R.H. indicator set
SKU:
190714
$261.00
- Type: Multi-functional Right-Hand (RH) Front Lamp Assembly (Passenger Side for Left-Hand Drive vehicles).
- Integrated Functions:
- Fog Lamp: Provides a wide, low, and flat beam of light for enhanced visibility in adverse weather conditions (fog, heavy rain, snow).
- Position Lamp (Parking Light): Emits a low-intensity light for vehicle presence and dimension indication, especially when parked or in low-light conditions.
- Indicator (Turn Signal): Flashing amber light for signaling turns or lane changes.
- Light Source: Typically houses separate incandescent bulbs for each function (e.g., H1 for fog, W5W for position, PY21W for indicator), or potentially an integrated LED solution in some aftermarket or later designs.
- Lens Material: Durable, high-clarity polycarbonate or glass, designed for optimal light transmission and resistance to impact.
- Housing Material: Robust, sealed plastic housing that protects internal wiring, bulb sockets, and reflectors from moisture, dust, and vibration.
- Mounting: Designed for precise fitment within the Maserati 4200’s front bumper or lower fascia, matching original factory mounting points.
- Connectivity: Features a dedicated multi-pin electrical connector for plug-and-play integration with the vehicle’s front wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE R19 for fog lamps, R7 for position lamps, R6 for indicators).
- Aesthetics: Designed to seamlessly integrate with the aggressive yet elegant styling of the Maserati 4200’s front end.
Front RH Mudguard Assembly
SKU:
980145037
$2,687.00
- Type: This part number refers to the complete exterior body panel that covers the top of the front right-hand wheel (passenger side in Left-Hand Drive vehicles). It is commonly known as a fender or wing. The “Assembly” designation implies it’s a primary panel, potentially including mounting brackets, but usually not auxiliary components like side markers, vents, or inner fender liners, which are typically sold separately.
- Function: The primary functions of the front right-hand mudguard assembly are essential for vehicle aesthetics, protection, and aerodynamics:
- Protection: Shields the engine bay, suspension components, and the side of the vehicle from debris (rocks, mud, water) flung up by the rotating front wheel.
- Aesthetics: Forms a significant part of the vehicle’s exterior styling, contributing to its sleek lines and overall visual appeal, crucial for a Maserati.
- Aerodynamics: Designed to manage airflow around the front wheels and along the side of the vehicle, contributing to aerodynamic efficiency and stability.
- Component Mounting: Provides mounting points for various exterior elements such as side marker lights, fender vents, and the inner wheel well liner.
- Components: Typically consists of the main molded metal or composite panel. It will have mounting tabs or holes for attachment to the vehicle’s chassis, A-pillar, and front bumper.
- Location: The exterior body panel located over the front right wheel, extending from the front bumper to the front door on the passenger side of the vehicle.
- Material: For these Maserati models, it is often constructed from lightweight and strong materials such as steel, aluminum, or composite materials (e.g., fiberglass or carbon fiber reinforced plastics), chosen for their balance of rigidity, dent resistance, and weight.
- Design: Precisely sculpted to integrate seamlessly with the vehicle’s overall body lines, matching the adjacent hood, door, and bumper components. Its contours are specific to the GranCabrio and GranTurismo, reflecting their distinctive styling.
Fuel Tank Wiring Harness
SKU:
200499
$577.00
- Type: A specialized, pre-assembled electrical wiring harness designed for components within and immediately around the vehicle’s fuel tank.
- Function: This harness provides the necessary electrical connections and data pathways for critical fuel system components located in and near the fuel tank. It specifically connects:
- Fuel Pump(s): Supplies power to the in-tank electric fuel pump(s) to draw fuel from the tank and deliver it to the engine.
- Fuel Level Sender Unit(s): Transmits information about the fuel level in the tank to the fuel gauge on the instrument cluster.
- Fuel Pressure Sensor (if equipped): Monitors fuel pressure within the tank or delivery lines.
- Evaporative Emissions (EVAP) System Components: Connects to elements like the fuel tank pressure sensor or purge valve that are part of the vehicle’s emissions control system.
- Ground Connections: Provides essential grounding for these components.
- Safety Features: Designed with specific, often sealed, connectors and robust insulation to prevent fuel vapor ingress into electrical circuits and mitigate fire hazards. It complies with strict automotive safety standards for fuel system components.
- Complexity: Features multiple branches and specialized, often sealed, connectors for each fuel system component, and varying wire gauges to handle the power requirements of the fuel pump.
- Location: Primarily routed around and directly on the fuel tank itself, often accessible from under the vehicle or through an access panel in the trunk/boot floor.
- Material: High-quality, automotive-grade copper wire with robust, fuel-resistant, and heat-resistant insulation. Connectors are typically sealed plastic with corrosion-resistant terminals, engineered to withstand exposure to fuel vapors and liquids.
- Design: Precisely engineered for routing within the confined space around the fuel tank, ensuring secure mounting and protection from abrasion, vibration, and chemical exposure.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200’s fuel tank and associated components.
Fuse Box Mounting Bracket
SKU:
259817
$70.00
- Type: This part number refers to a mounting bracket, support, or housing component specifically designed to securely hold and position one of the vehicle’s fuse boxes (or fuse cases) within its designated location. It is a structural element, not an electrical one.
- Function: The primary functions of the Fuse Box Mounting Bracket are crucial for the integrity and protection of the vehicle’s electrical system:
- Secure Mounting: Firmly holds the fuse box in place, preventing it from rattling, shifting, or becoming disconnected due to vehicle vibrations, impacts, or road irregularities.
- Protection: Helps protect the fuse box and its internal electrical components from physical damage, moisture, and debris, depending on its location and design.
- Proper Positioning: Ensures the fuse box is correctly oriented for easy access during maintenance (e.g., checking or replacing fuses) and for proper routing of electrical harnesses.
- Vibration Dampening: May incorporate design features to absorb vibrations, protecting the delicate electrical connections within the fuse box.
- Components: Typically consists of a molded plastic or stamped metal frame, bracket, or tray. It will have specific mounting points for attachment to the vehicle’s chassis, body structure, or another sub-component, and integrated clips, tabs, or slots for the fuse box itself. It does not include the fuse box (case) itself, fuses, or relays.
- Location: Its location varies depending on which fuse box it supports. Fuse boxes in these Maserati models can be found in the engine bay, under the dashboard (e.g., driver’s side footwell), or in the trunk. This specific part number would correspond to a particular fuse box’s support in one of these areas.
- Material: Usually constructed from durable, high-strength automotive-grade plastic (e.g., ABS, polypropylene) or sometimes corrosion-resistant stamped steel, chosen for its rigidity, resilience to temperature fluctuations, and ability to withstand moderate impacts.
- Design: Precisely molded or shaped to perfectly fit the contours of the specific fuse box it supports, ensuring a snug and secure fit. Its design also accounts for the surrounding vehicle structure and electrical harness routing.
Gasket
SKU:
AJ88922
$21.02
The Gasket (AJ88922) is an essential component in the engine assembly of Jaguar vehicles. It serves to create a tight seal between two surfaces, preventing leaks of fluids and gases.
Gear Shift Assembly
SKU:
C2Z8728
$105.11
The Gear Shift Assembly (C2Z8728) is a critical component of the transmission system in Jaguar vehicles. It enables the driver to select different gears, facilitating smooth and efficient vehicle operation.
Gear Shift Assembly
SKU:
C2Z5834
$240.70
The Gear Shift Assembly (C2Z8728) is a critical component of the transmission system in Jaguar vehicles. It enables the driver to select different gears, facilitating smooth and efficient vehicle operation.
GPS Navigation Wiring Harness
SKU:
200501
$205.00
- Type: A dedicated electrical wiring harness designed to integrate and power the components of the vehicle’s factory GPS navigation system.
- Function: This harness provides the necessary electrical connections and data pathways for all elements of the GPS navigation system. This typically includes:
- Navigation Unit (NIT unit): The main control module for the navigation system, often located in the trunk or under the armrest.
- GPS Antenna: Receiving satellite signals for positioning.
- Display Screen: The screen on the dashboard that displays maps and navigation information.
- Input Controls: Buttons or interfaces used to operate the navigation system.
- Power and Ground: Supplying power to the navigation components and ensuring proper grounding.
- Data Communication: Enabling communication between the navigation unit, display, and other vehicle systems (e.g., vehicle speed sensor, reverse signal for accurate positioning).
- Complexity: Features multiple branches and specialized connectors specific to the navigation unit, antenna, display, and integration points with the vehicle’s main electrical system. It often includes shielded cables to protect sensitive GPS and data signals from interference.
- Location: Routed throughout various parts of the vehicle, from the dashboard area (for the display and controls) to the trunk/boot (for the main navigation unit) and potentially the roof or dashboard for the GPS antenna.
- Material: High-quality, automotive-grade copper wire with durable insulation, and robust, often keyed, plastic connectors to ensure secure and correct connections.
- Design: Precisely engineered for routing within the vehicle’s interior, ensuring secure fitment and protection from strain or interference.
- Compatibility: Exclusively designed for Maserati 4200 models equipped with the original factory GPS navigation system. It is not generally interchangeable with non-navigation equipped vehicles or aftermarket systems without significant modification.
Hand Brake Knob in Leather
SKU:
191830
$38.59
Specifications
- Material: Leather with high-quality internal components
- Compatibility: Maserati 3200 GT, Assetto Corsa
- Installation Location: Center console area
- Tools Required: Basic hand tools for installation
Hold Down
SKU:
C2Z6792
$121.02
The Alternator (C2Z3414) is a crucial component in Jaguar vehicles responsible for generating electrical power to recharge the battery and supply energy to the vehicle’s electrical systems while the engine is running.
Hub – Jaguar
SKU:
C2D60511
$213.88
The Hub (C2D60511) is an essential component in Jaguar vehicles, serving as a critical part of the wheel assembly. It facilitates the connection between the wheel and the vehicle, allowing for smooth rotation and effective handling.
Hub & Bearing
SKU:
C2D38987
$620.00
The Jaguar Hub & Bearing (C2D38987) is essential for smooth wheel rotation and optimal performance in select Jaguar models. Made from high-strength materials, it ensures durability and efficient power transfer. This precision-engineered assembly is easy to install and vital for maintaining vehicle suspension and steering integrity.
Hub & Bearing
SKU:
C2D49191
$345.01
The Hub & Bearing (C2D49191) is an essential component of the wheel assembly in Jaguar vehicles, designed to support the wheel and facilitate smooth rotation while ensuring stability and safety. This part plays a critical role in the vehicle’s suspension and steering systems.
Hub & Bearing
SKU:
C2D47189-2
$320.44
The Jaguar ABS Sensor (C2P15770) is essential for the anti-lock braking system, monitoring wheel speed to prevent lock-up during braking. Designed for select Jaguar models, it ensures reliable brake performance and safety. Easy to install, this durable sensor is key to maintaining effective braking control.
Hub Nut Hex
SKU:
203780
$32.00
- Type: This part number refers to a large, hexagonal nut designed to secure the wheel hub and/or wheel bearing assembly onto the axle shaft or spindle. It is a critical fastening component for the wheel assembly.
- Function: The primary functions of the hub nut are paramount for the mechanical integrity and safety of the wheel assembly:
- Secures Wheel Hub/Bearing: Tightly fastens the wheel hub and/or the integrated wheel bearing assembly onto the vehicle’s axle shaft (for driven wheels) or spindle (for non-driven wheels).
- Maintains Preload: Applies and maintains the correct preload on the wheel bearing, which is crucial for the bearing’s lifespan, smooth operation, and preventing excessive play in the wheel.
- Prevents Loosening: Designed with features (e.g., locking tab, nylon insert, or a requirement for staking/peening) to prevent it from loosening under vibration and rotational forces.
- Components: Consists of a single, large, high-strength hexagonal nut. It may feature an integrated washer or a specific design for a locking mechanism (e.g., a staked collar that is peened into a groove on the axle/spindle after tightening).
- Location: Located at the very center of the wheel hub, directly securing it to the vehicle’s axle shaft (if a driven wheel) or spindle (if a non-driven wheel). It is typically covered by the center cap of the wheel or a dust cap.
- Material: Made from high-strength, heat-treated steel alloy, designed to withstand extremely high torque specifications and continuous stress without stretching or failing.
- Design: Precisely manufactured to specific dimensions and thread pitches to perfectly match the axle shaft/spindle. Its hexagonal head is sized for use with large sockets and high-torque wrenches. The design often dictates it as a single-use or “torque-to-yield” fastener due to the high tightening forces and critical safety role.
Idler Pulley
SKU:
C2C37064
$56.42
The Idler Pulley (C2C37064) is a critical component in the accessory drive system of Jaguar vehicles. It helps guide and support the accessory drive belt, ensuring smooth operation and proper alignment.
Immobilizer ECU
SKU:
IMMOBILIZER ECU For Maserati 4200 Part Number: 60673131
$124.00
- Type: Dedicated electronic control unit (ECU) for the vehicle’s passive anti-theft system.
- Function: Manages the vehicle’s immobilizer system. It communicates with the transponder chip embedded in the vehicle’s ignition key and the Engine Control Unit (ECU) to ensure that the engine can only be started with an authorized, correctly coded key.
- Security Role: Provides a critical layer of anti-theft protection by preventing the engine from starting if an unauthorized key or an incorrect key code is detected, even if the vehicle is hot-wired.
- Communication: Communicates via a data bus (e.g., CAN bus or serial data line) with the engine ECU and often with an antenna ring around the ignition barrel that reads the key’s transponder.
- Programming: Typically requires specialized programming (e.g., with Maserati diagnostic tools) to “learn” new keys or synchronize with a new engine ECU. It cannot simply be swapped between vehicles.
- Location: Often located within the dashboard behind the glovebox, or sometimes integrated near the steering column or main fuse box, providing a secure, tamper-resistant installation.
- Material: Robust plastic housing protecting sensitive internal electronic components and circuitry.
- Durability: Designed for long-term reliability as a vital security component.
Kayser Vacuum Amplifier
SKU:
377493347
$124.99
Specifications
- Compatibility: Maserati 3200 GT, Assetto Corsa
- Part Number: 377493347
- Material: High-grade automotive materials
- Installation Location: Engine bay, connecting brake servo to air intake system
Investing in a reliable vacuum amplifier air tube is vital for ensuring the safety and performance of your Maserati. Regular maintenance checks will help keep your braking system functioning optimally, providing confidence and peace of mind on the road.
Keys and Blocks Kit
SKU:
980001813
$429.50
- Type: A comprehensive, pre-matched security system kit.
- Function: Designed to replace critical components of the vehicle’s immobilizer and access system. It ensures all included parts (keys, immobilizer modules, lock cylinders) are factory-paired to work together seamlessly, providing a secure and functional anti-theft system. This kit is typically used in cases of major security system failure, loss of all keys, or significant theft recovery where components need to be replaced.
- Typical Components (may vary slightly by specific kit/year):
- Ignition Key(s): Usually one or more new remote key fobs (often two-button, e.g., the blue key type). These keys contain the transponder chip required for engine start.
- Immobilizer Control Unit (ECU): The main electronic module that controls the immobilizer function.
- Lock Cylinders/Barrels: This can include new ignition barrel, door lock cylinders, and potentially trunk/boot lock cylinder, all keyed to the new keys provided in the kit.
- Code Card: A physical card containing the unique electronic code for the immobilizer system and possibly a mechanical key code. This card is crucial for future key programming or system diagnostics.
- Security Role: Provides the ultimate layer of anti-theft protection by ensuring that all physical and electronic access points are synchronized and secure. Prevents the engine from starting without the correct, coded key and matching immobilizer components.
- Programming: While the components in the kit are pre-matched at the factory, significant programming and synchronization with the vehicle’s Body Control Module (BCM) and other ECUs will be required after installation. This is a highly specialized task, usually performed by an authorized Maserati dealership or a very few highly qualified automotive locksmiths with specific diagnostic equipment.
- Material: High-quality automotive-grade components, including robust metals for lock cylinders, durable plastics for key fobs and ECU housings, and precise electronics.
- Durability: Built to Maserati’s exacting standards for long-term security and operational reliability.
Keys and Blocks Kit
SKU:
980001808
$904.58
- Type: A comprehensive, factory-matched security system kit designed for specific market regions.
- Function: This kit is designed to replace or initialize the core components of the vehicle’s immobilizer and access system, ensuring all included parts (keys, immobilizer modules, lock cylinders) are precisely matched and synchronized. It is typically required in critical situations such as the loss of all original keys, a major failure of the immobilizer system, or specific theft recovery scenarios.
- Key Features (specific to this P/N):
- Two-Button Keys: Includes one or more new remote key fobs that feature two buttons (typically lock and unlock functions). These keys also contain the transponder chip essential for engine start authorization.
- Market Specificity: Explicitly designated as “Valid for USA and CDN” (USA and Canada), indicating it complies with the specific radio frequencies and security protocols used in these regions.
- Typical Components (may include, but not limited to):
- New remote key fob(s) with two buttons.
- The main Immobilizer Control Unit (ECU) pre-coded to the new keys.
- Matched lock cylinders/barrels for the ignition, doors, and potentially the trunk/boot, all keyed to the new physical keys.
- A Code Card containing vital electronic and mechanical codes for the system.
- Security Role: Provides the highest level of anti-theft protection by ensuring that only correctly programmed keys and matching immobilizer components can start and operate the vehicle, effectively preventing engine ignition by unauthorized means.
- Programming: Although the components are factory-matched within the kit, complex programming and synchronization with the vehicle’s Body Control Module (BCM) and other ECUs are absolutely required after installation. This highly specialized procedure necessitates proprietary Maserati diagnostic equipment and skilled technicians.
- Material: Comprised of high-quality automotive-grade components, including robust metals for lock cylinders, durable plastics for key fobs and ECU housings, and precision electronics.
- Durability: Manufactured to Maserati’s rigorous standards, ensuring long-term reliability and security performance.
LH Hinge / Left Hand Bonnet Hinge
SKU:
384300115
$265.00
Product Specifications:
- Type: A precision-engineered mechanical hinge designed to articulate and support the left-hand (driver’s side) side of the vehicle’s bonnet (hood).
- Function: Its primary purpose is to allow the bonnet to smoothly pivot open and closed, providing access to the engine compartment. It ensures the bonnet is held securely in alignment with the surrounding body panels when closed, and provides stable support when open, often incorporating a stop mechanism to prevent it from opening too far.
- Components: Typically consists of two main pivot arms or plates, a pivot pin or bolt, and potentially a spring mechanism (depending on design) for assistance in opening or holding the bonnet open. It is a robust metal assembly designed for long-term durability.
- Location: Mounted at the front of the vehicle, on the left-hand side of the engine compartment, connecting the bonnet to the vehicle’s chassis or fender structure.
- Material: Constructed from high-strength steel or aluminum, designed to withstand the weight of the bonnet, repeated opening/closing cycles, and environmental factors, often with a corrosion-resistant coating.
- Design: Precisely engineered with specific mounting points and pivot geometry to ensure correct bonnet alignment, smooth operation, and structural integrity, crucial for proper panel gaps and preventing the bonnet from fouling other components.
LH Longitudinal Harness
SKU:
200507
$176.00
- Type: A major, extensive electrical wiring loom that runs along the left-hand (driver’s) side of the vehicle, often routed along the chassis, underbody, or within the interior cabin structure.
- Function: This harness acts as a crucial electrical distribution pathway, carrying power, ground, and data signals to various components located along the left longitudinal section of the Maserati. It connects elements from the front of the vehicle to the rear, serving a multitude of systems including:
- Fuel System: Potentially fuel pump power, fuel level sender, and EVAP system components, if routed on this side.
- Rear Lighting: Taillights, brake lights, turn signals, reverse lights on the left side.
- Rear Sensors: Parking sensors, wheel speed sensors (ABS/ESP) for the left rear wheel, suspension sensors.
- Exhaust System Sensors: Oxygen sensors (post-catalytic converter) or temperature sensors.
- Body Control Modules/Relay Boxes: Connecting to any localized control units or relay boxes in the rear or side sections.
- Other Ancillary Systems: Various modules or actuators positioned along the left side of the undercarriage or within the rear quarter panel, or even specific interior components that draw power from this side’s main loom.
- Complexity: A highly complex and lengthy harness with numerous branches, multi-pin connectors, various wire gauges, and often protective sheathing, designed to withstand environmental factors.
- Location: Primarily routed along the vehicle’s left-hand chassis rail, underbody, or within the left rear quarter panel/sill area, connecting to the main body harness in the cabin or engine bay.
- Material: High-quality, automotive-grade copper wire with robust, weather-resistant, and abrasion-resistant insulation. Connectors are typically sealed and designed to prevent moisture and dirt ingress, crucial for underbody exposure.
- Design: Precisely engineered for routing along the vehicle’s frame, with specific lengths and connector orientations for each component, ensuring secure mounting and protection from road debris, moisture, heat, and vibration.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 chassis and components on the left-hand side. It is distinct from the right-hand longitudinal harness (e.g., P/N 200678).
Lower Deflector
SKU:
C2C6517-5-2-3
$31.02
The Lower Deflector (C2Z2137) is a key component in the aerodynamics and cooling system of Jaguar vehicles. It helps direct airflow and protects essential components from road debris and other elements.