Anti-Lift Sensor
SKU:
186594
$207.00
- Type: Electronic inclinometer or tilt sensor.
- Function: Detects changes in the vehicle’s angle or inclination. It is a key component of the factory anti-theft alarm system, designed to trigger the alarm if the car is lifted (e.g., by a jack for wheel theft, or by a tow truck for vehicle theft) when the alarm is armed.
- Sensitivity: Calibrated to ignore minor natural movements (like a person getting in or out of the car) but respond to significant changes in tilt.
- Location: Typically mounted in a central, secure location within the vehicle chassis or cabin, often under the dashboard, center console, or in the trunk, to accurately monitor the vehicle’s overall angle.
- Connectivity: Features an electrical connector to interface with the vehicle’s alarm control module or body control module (BCM).
- Material: Durable, sealed plastic housing to protect sensitive internal electronic components from dust, moisture, and vibrations.
- Durability: Designed for long-term reliability within the vehicle’s operating environment.
- Compatibility: Specifically calibrated and designed for the Maserati 4200’s dimensions and alarm system.
Blue key Two Button
SKU:
980001801
$243.00
- Type: Integrated remote key fob, combining a physical ignition key blade with a built-in remote control for vehicle functions.
- Color: Distinctive blue casing, as specified.
- Buttons: Features two primary buttons for remote functions:
- Lock Button: To lock all vehicle doors and arm the alarm system.
- Unlock Button: To unlock all vehicle doors and disarm the alarm system.
- Internal Components: Contains a transponder chip (for immobilizer function), a remote control circuit board, and a small battery (typically CR2032 or similar) for the remote functions.
- Key Blade: Includes an un-cut or pre-cut metal key blade that mechanically operates the ignition and door locks (if equipped).
- Security Features: The integrated transponder chip is crucial for the vehicle’s immobilizer system, allowing the engine to start only when an authorized key is detected.
- Material: Durable molded plastic casing.
- Programming: Requires specialized programming by a Maserati dealership or a qualified automotive locksmith to synchronize the remote functions with the vehicle’s Body Control Module (BCM) and to code the transponder chip to the Immobilizer ECU for engine starting.
Immobilizer ECU
SKU:
IMMOBILIZER ECU For Maserati 4200 Part Number: 60673131
$124.00
- Type: Dedicated electronic control unit (ECU) for the vehicle’s passive anti-theft system.
- Function: Manages the vehicle’s immobilizer system. It communicates with the transponder chip embedded in the vehicle’s ignition key and the Engine Control Unit (ECU) to ensure that the engine can only be started with an authorized, correctly coded key.
- Security Role: Provides a critical layer of anti-theft protection by preventing the engine from starting if an unauthorized key or an incorrect key code is detected, even if the vehicle is hot-wired.
- Communication: Communicates via a data bus (e.g., CAN bus or serial data line) with the engine ECU and often with an antenna ring around the ignition barrel that reads the key’s transponder.
- Programming: Typically requires specialized programming (e.g., with Maserati diagnostic tools) to “learn” new keys or synchronize with a new engine ECU. It cannot simply be swapped between vehicles.
- Location: Often located within the dashboard behind the glovebox, or sometimes integrated near the steering column or main fuse box, providing a secure, tamper-resistant installation.
- Material: Robust plastic housing protecting sensitive internal electronic components and circuitry.
- Durability: Designed for long-term reliability as a vital security component.
Keys and Blocks Kit
SKU:
980001813
$429.50
- Type: A comprehensive, pre-matched security system kit.
- Function: Designed to replace critical components of the vehicle’s immobilizer and access system. It ensures all included parts (keys, immobilizer modules, lock cylinders) are factory-paired to work together seamlessly, providing a secure and functional anti-theft system. This kit is typically used in cases of major security system failure, loss of all keys, or significant theft recovery where components need to be replaced.
- Typical Components (may vary slightly by specific kit/year):
- Ignition Key(s): Usually one or more new remote key fobs (often two-button, e.g., the blue key type). These keys contain the transponder chip required for engine start.
- Immobilizer Control Unit (ECU): The main electronic module that controls the immobilizer function.
- Lock Cylinders/Barrels: This can include new ignition barrel, door lock cylinders, and potentially trunk/boot lock cylinder, all keyed to the new keys provided in the kit.
- Code Card: A physical card containing the unique electronic code for the immobilizer system and possibly a mechanical key code. This card is crucial for future key programming or system diagnostics.
- Security Role: Provides the ultimate layer of anti-theft protection by ensuring that all physical and electronic access points are synchronized and secure. Prevents the engine from starting without the correct, coded key and matching immobilizer components.
- Programming: While the components in the kit are pre-matched at the factory, significant programming and synchronization with the vehicle’s Body Control Module (BCM) and other ECUs will be required after installation. This is a highly specialized task, usually performed by an authorized Maserati dealership or a very few highly qualified automotive locksmiths with specific diagnostic equipment.
- Material: High-quality automotive-grade components, including robust metals for lock cylinders, durable plastics for key fobs and ECU housings, and precise electronics.
- Durability: Built to Maserati’s exacting standards for long-term security and operational reliability.
Keys and Blocks Kit
SKU:
980001808
$904.58
- Type: A comprehensive, factory-matched security system kit designed for specific market regions.
- Function: This kit is designed to replace or initialize the core components of the vehicle’s immobilizer and access system, ensuring all included parts (keys, immobilizer modules, lock cylinders) are precisely matched and synchronized. It is typically required in critical situations such as the loss of all original keys, a major failure of the immobilizer system, or specific theft recovery scenarios.
- Key Features (specific to this P/N):
- Two-Button Keys: Includes one or more new remote key fobs that feature two buttons (typically lock and unlock functions). These keys also contain the transponder chip essential for engine start authorization.
- Market Specificity: Explicitly designated as “Valid for USA and CDN” (USA and Canada), indicating it complies with the specific radio frequencies and security protocols used in these regions.
- Typical Components (may include, but not limited to):
- New remote key fob(s) with two buttons.
- The main Immobilizer Control Unit (ECU) pre-coded to the new keys.
- Matched lock cylinders/barrels for the ignition, doors, and potentially the trunk/boot, all keyed to the new physical keys.
- A Code Card containing vital electronic and mechanical codes for the system.
- Security Role: Provides the highest level of anti-theft protection by ensuring that only correctly programmed keys and matching immobilizer components can start and operate the vehicle, effectively preventing engine ignition by unauthorized means.
- Programming: Although the components are factory-matched within the kit, complex programming and synchronization with the vehicle’s Body Control Module (BCM) and other ECUs are absolutely required after installation. This highly specialized procedure necessitates proprietary Maserati diagnostic equipment and skilled technicians.
- Material: Comprised of high-quality automotive-grade components, including robust metals for lock cylinders, durable plastics for key fobs and ECU housings, and precision electronics.
- Durability: Manufactured to Maserati’s rigorous standards, ensuring long-term reliability and security performance.
Master Superhigh Frequency Sensor
SKU:
186595
$129.00
- Type: Ultrasonic or microwave-based sensor for interior motion detection.
- Function: Part of the vehicle’s anti-theft alarm system. When the alarm is armed, this sensor emits and receives high-frequency sound waves (ultrasound) or electromagnetic waves (microwave/radar) within the vehicle’s cabin. It detects any significant changes in these waves caused by movement, such as an intruder entering the vehicle or even a window being broken.
- Detection Principle: Works on the principle of analyzing reflections of emitted waves. Any disruption to these reflections indicates movement inside the protected area, triggering the alarm.
- Coverage: Designed to cover the entire interior volume of the vehicle’s cabin.
- Location: Typically mounted in the overhead console, on the A-pillar, or in another strategic central location within the cabin to provide optimal coverage.
- Connectivity: Features an electrical connector to interface with the vehicle’s alarm control module or body control module (BCM).
- Material: Durable plastic housing designed to blend with the interior aesthetics while protecting sensitive internal electronic components.
- Sensitivity Adjustment: Some systems allow for sensitivity adjustment to prevent false alarms from environmental factors (e.g., strong vibrations, extreme temperature changes) or small animals left in the car (though not recommended for security reasons).
- Durability: Engineered for reliable long-term operation within the vehicle’s interior environment.
Red Valet Key One Button
SKU:
980001802
$213.00
- Type: Integrated remote key fob, combining a physical ignition key blade with a simplified remote control.
- Color: Distinctive red casing, often used by manufacturers to denote a valet or limited-access key.
- Buttons: Typically features a single button for remote lock/unlock functionality, or sometimes just a lock function, depending on the precise design and intended limitation.
- Internal Components: Contains a transponder chip (for immobilizer function) and a basic remote control circuit board powered by a small battery.
- Key Blade: Includes an un-cut or pre-cut metal key blade that mechanically operates the ignition and door locks.
- Security Features: The integrated transponder chip is crucial for the vehicle’s immobilizer system, allowing the engine to start only when an authorized key is detected.
- Valet-Specific Limitations: Designed to offer limited access or functionality. While it can start the car, it typically cannot unlock the trunk/boot or glovebox, or it may disable certain infotainment features when in use, protecting personal belongings and settings when the car is handed over for valet service.
- Material: Durable molded plastic casing.
- Programming: Requires specialized programming by a Maserati dealership or a qualified automotive locksmith to synchronize the remote functions with the vehicle’s Body Control Module (BCM) and to code the transponder chip to the Immobilizer ECU for engine starting.
Sheets and Door Opening Kit
SKU:
980001803
$414.00
- Type: A specialized electronic kit designed to support or integrate components of the vehicle’s central door locking, remote keyless entry, and potentially the immobilizer system.
- Function: Facilitates the electronic communication and control necessary for remote door locking/unlocking, and potentially aspects of the vehicle’s anti-theft immobilizer system. The “Sheets” component could refer to programming instructions, circuit diagrams, or specific electronic modules. The “Door Opening” aspect points to the central locking receiver or a related component that interprets signals from a remote key fob (specifically noted as “One button” telecontrol).
- Components: Likely includes an electronic module (receiver/controller), associated wiring, and possibly specific “sheets” which could be internal circuit boards or specialized transponder/receiver elements. It is designed to work with a one-button remote key (telecontrol).
- Security & Convenience Role: Integral to the remote keyless entry system, allowing the convenient locking and unlocking of doors from a distance. It also plays a role in the secure operation of the vehicle’s immobilizer by enabling communication between the key and the vehicle’s anti-theft systems.
- Programming: The kit is explicitly noted as “Programmable,” meaning professional programming and synchronization with the vehicle’s existing security modules (like the Immobilizer ECU and other keys) are required for correct functionality.
- Market Specificity: Identified as “Not for USA and CDN” (Canada) markets, suggesting regional differences in alarm or remote entry systems.
- Material: Electronic components housed in durable plastic casing, with automotive-grade wiring.
- Durability: Designed for reliable electronic operation within the vehicle’s cabin environment.
Sheets and Door Opening/Alarm Kit
SKU:
980001805
$541.00
- Type: Comprehensive electronic kit encompassing components for the vehicle’s central door locking, remote keyless entry, and integrated anti-theft alarm system.
- Function: This kit serves as a central control module or a set of core components that manage the sophisticated functions of:
- Remote Keyless Entry: Receiving signals from the remote key fob to remotely lock and unlock vehicle doors.
- Central Door Locking: Electrically controlling all vehicle door locks simultaneously.
- Anti-Theft Alarm System: Monitoring various inputs (door sensors, hood sensor, trunk sensor, interior volumetric sensors, tilt sensor) and triggering the alarm (horn, flashing lights) upon unauthorized entry or movement.
- Integration with Immobilizer: While the immobilizer ECU (P/N 60673131) is a separate key-recognition unit, this kit often communicates with it to ensure system coherence.
- Components: Likely includes the main control module for the central locking and alarm, associated wiring harnesses, potentially specific receivers, and possibly other related electronic sub-components. It’s designed to interface with the vehicle’s existing sensors and actuators.
- Security & Convenience Role: Provides both the convenience of remote access and the vital security layer of an active alarm system to protect the vehicle from theft and unauthorized access.
- Programming: Requires specialized programming and synchronization with the vehicle’s existing electronic architecture (including keys, immobilizer, and body control modules) for full functionality. This typically necessitates dealer-level diagnostic tools.
- Material: Electronic components housed in durable, protective casings, with high-quality automotive-grade wiring.
- Durability: Engineered for reliable electronic operation and security functions within the vehicle’s environment.
Sheets And Door Opening/AlarmKit
SKU:
980001806
$347.50
- Type: A comprehensive electronic kit containing core control modules and components for the vehicle’s central door locking, remote keyless entry, and advanced anti-theft alarm system.
- Function: This kit acts as a central hub for managing the full suite of security and convenience features related to vehicle access. Its responsibilities include:
- Remote Keyless Entry: Receiving and interpreting signals from the vehicle’s remote key fobs to execute locking and unlocking commands.
- Central Door Locking: Controlling the synchronized locking and unlocking of all vehicle doors, as well as the trunk/boot and fuel filler cap (if integrated).
- Anti-Theft Alarm System: Actively monitoring various sensors throughout the vehicle (e.g., door, hood, trunk, interior volumetric sensors, tilt sensors) for unauthorized access or movement. Upon detection, it triggers the alarm sequence (horn and flashing lights) to deter theft.
- Immobilizer Integration: While the immobilizer ECU handles key authentication for engine start, this alarm kit often communicates with it to ensure seamless operation of the overall security architecture.
- Components: Typically includes a main electronic control module (or multiple modules), associated wiring harnesses, and potentially specific transponders or receivers depending on the system’s design. The term “Sheets” may refer to specific internal electronic boards or configuration data.
- Security & Convenience Role: Provides essential convenience through remote access and critical security by acting as the primary defense against unauthorized entry and theft.
- Programming: Crucially, this kit requires specialized programming and synchronization with the vehicle’s existing electronic control units (like the Body Control Module and Immobilizer ECU) and all associated keys for proper functionality. This process is complex and typically requires manufacturer-specific diagnostic tools.
- Material: Electronic components encapsulated in durable, protective casings, with high-quality automotive-grade wiring, designed for resilience within the vehicle’s electrical environment.
- Durability: Engineered for reliable long-term operation of vital security and access functions.
Slave SuperHigh Frequency Sensor
SKU:
186596
$153.00
- Type: Auxiliary ultrasonic or microwave-based sensor for interior motion detection.
- Function: Works in conjunction with the “Master Superhigh Frequency Sensor” (P/N 186595) to provide enhanced or more comprehensive interior volumetric coverage for the vehicle’s anti-theft alarm system. It detects movement within its specific zone of the cabin (e.g., rear cabin area in a Coupe, or potentially both front and rear in a Spyder/Convertible) when the alarm is armed.
- Detection Principle: Similar to the master sensor, it emits and receives high-frequency sound waves (ultrasound) or electromagnetic waves (microwave/radar) and detects disruptions caused by movement within its detection field.
- Coverage Enhancement: Expands the detection capability of the alarm system to areas that might be partially obscured or less effectively covered by a single master sensor, ensuring no blind spots for intrusion detection.
- Location: Typically mounted in a secondary strategic location within the cabin, such as the rear parcel shelf, a rear pillar, or in a convertible, designed to cover the specific open-air cabin volume.
- Connectivity: Features an electrical connector to interface with the main alarm control module or directly with the master sensor, which then communicates with the main control unit.
- Material: Durable plastic housing designed to integrate discreetly into the interior, protecting sensitive internal electronic components.
- Durability: Engineered for reliable long-term operation within the vehicle’s interior environment.
- Compatibility: Specifically calibrated and designed to complement the master sensor and the overall alarm system of the Maserati 4200.