RH HeadLight – Giallo GranTurismo
SKU:
190712046
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Typically utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Some models may have Xenon (HID) options depending on original specification.
- Lens Material: High-clarity polycarbonate or glass, UV-treated for resistance against yellowing and hazing.
- Housing Material: Durable, heat-resistant plastic (e.g., polypropylene), designed for optimal heat dissipation and protection of internal components.
- Mounting: Direct bolt-on replacement, matching original factory mounting points for precise fitment and alignment.
- Connectivity: Features integrated electrical connectors for plug-and-play installation with the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets).
- Aesthetics: Designed to seamlessly integrate with the Maserati 4200’s distinct front fascia, maintaining its iconic styling.
RH Headlight – Grigio Nuvolari(Cod. PPG 226686 – 238643) (Nuvolari Grey (Cod. PPG 226686 – 238643))
SKU:
190712039
$952.53
- Type: Complete Right-Hand (RH) Headlight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Typically equipped for Halogen bulbs for both low and high beams. It integrates essential turn signal and parking light functions. Depending on the vehicle’s original specification, it may be designed to accommodate Xenon (HID) lighting components (bulbs, igniters, ballasts).
- Lens Material: High-grade, UV-stabilized polycarbonate or glass, engineered for exceptional clarity and long-term resistance to yellowing, hazing, and cracking.
- Housing Material: Durable, high-quality, heat-resistant plastic (e.g., polypropylene) that forms the structural body of the assembly, providing protection for internal components and efficient heat dissipation.
- Reflectors/Projectors: Precision-engineered internal reflectors and/or projector lenses (depending on variant) to ensure optimal light distribution, beam pattern, and minimal glare.
- Mounting: Designed for a direct, bolt-on replacement, guaranteeing precise fitment and alignment with the Maserati 4200’s front bodywork and existing mounting points.
- Connectivity: Features dedicated electrical connectors for seamless, plug-and-play integration with the vehicle’s electrical system.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) concerning light output and safety.
- Aesthetics: Engineered to perfectly match the original factory appearance, preserving the distinctive and sophisticated front-end design of the Maserati 4200.
RH Rear TailLight
SKU:
195847
$282.85
- Type: Complete Right-Hand (RH) Rear Taillight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Function: Integrates multiple lighting functions including:
- Brake Light: Red, illuminates brightly when brakes are applied.
- Running/Tail Light: Red, continuous illumination for rear visibility.
- Turn Signal/Indicator: Amber, flashing light for signaling turns or lane changes.
- Reverse/Backup Light: White, illuminates when reverse gear is engaged.
- Rear Fog Light (if applicable): Red, typically brighter than running lights, for low visibility.
- Light Source: Primarily uses incandescent bulbs for various functions, though some aftermarket or specific market variants might incorporate LEDs.
- Lens Material: Durable, high-quality, impact-resistant polycarbonate or acrylic plastic, designed for optimal light transmission and color integrity.
- Housing Material: Robust, sealed plastic housing that protects internal wiring, bulb sockets, and reflectors from moisture, dust, and vibration.
- Mounting: Designed for direct, bolt-on replacement, ensuring precise fitment and alignment with the Maserati 4200’s rear bodywork.
- Connectivity: Features a dedicated multi-pin electrical connector for plug-and-play integration with the vehicle’s rear wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE R7, R6, R23, R38) for light output, color, and pattern.
- Aesthetics: Matches the original factory design, contributing significantly to the Maserati 4200’s distinctive and elegant rear styling.
Side Crash Sensor
SKU:
189062
$87.27
Product Name: Side Crash Sensor
Application: Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
Product Specifications:
- Type: Piezoelectric or Accelerometer-based Impact Sensor
- Function: Detects sudden lateral (side) deceleration or pressure changes indicative of a side impact collision.
- Location: Typically mounted within the vehicle’s side structure, often inside the door panels, B-pillars, or under the seats, strategically placed to detect forces unique to side impacts.
- Signal Output: Sends a precise electrical signal to the Airbag System Control Module (SRS ECU) upon detecting a collision exceeding a calibrated threshold.
- Sensitivity: Calibrated specifically for the Maserati 4200’s chassis characteristics and desired side airbag deployment thresholds.
- Material: Robust, sealed housing designed to withstand environmental factors and minor impacts without false triggers.
- Connectivity: Features a dedicated electrical connector (often yellow/orange-coded) for secure and reliable signal transmission.
- Part Number: Specific to Maserati (e.g., Maserati part number 189062 for Coupé models, 184993 for Spyder models, though always verify with VIN).
Side Mirror Switch
SKU:
383300136
$123.48
- Type: Multi-directional electrical switch with selector functions.
- Function: Allows the driver to electrically adjust the position of the left (LH) and right (RH) exterior side mirrors. It typically includes:
- A selector to choose which mirror (LH or RH) is being adjusted.
- A joystick, rocker, or directional pad for up/down/left/right mirror movement.
- May also include a mirror folding function (if equipped on the vehicle).
- Location: Commonly found on the driver’s side door panel or dashboard, within easy reach of the driver.
- Material: Durable automotive-grade plastic for the housing and button/joystick, with internal electrical contacts and circuit board. Often features illuminated symbols.
- Connectivity: Features a multi-pin electrical connector on the rear to interface with the vehicle’s wiring harness and mirror motors.
- Design: Ergonomically shaped for intuitive operation, seamlessly integrating into the Maserati’s interior design.
- Durability: Designed for repeated use, but susceptible to wear, electrical contact degradation, or sticky/fading surface issues over time.
Windshield Washer pump
SKU:
65358700
$30.58
The Windshield Washer Pump is a universally essential component for any vehicle, and your Maserati is no exception. It’s responsible for ensuring clear visibility by spraying washer fluid onto the windscreen, enabling the wiper blades to clean away dirt, dust, and debris. This pump is shared across several Maserati models, including the 4200, GranTurismo, and GranCabrio, which speaks to its robust and standardized design.
Product Name: Windshield Washer Pump
Application: Maserati 4200 GT (Coupé, Spyder, GranSport), GranTurismo, GranCabrio, and other compatible Maserati models.
Typical Part Number: 65358700 (This part number is widely cross-referenced for 4200, GranTurismo, GranCabrio, and even some Quattroporte models, making it a highly common Maserati washer pump).
Product Specifications:
- Type: Electric (12V DC) centrifugal or diaphragm pump.
- Function: Draws washer fluid from the reservoir and pressurizes it for delivery to the windshield washer jets (nozzles).
- Voltage: 12 Volts (standard automotive electrical system).
- Connections: Features a multi-pin electrical connector for power and activation signal, and an inlet/outlet for washer fluid hoses.
- Mounting: Typically designed to be directly mounted into the washer fluid reservoir via a rubber grommet seal.
- Material: Durable, high-grade plastic housing (e.g., ABS) and corrosion-resistant internal components, built to withstand various washer fluid compositions and operating temperatures.
- Flow Rate/Pressure: Engineered to deliver sufficient pressure and volume of fluid for effective and even spray across the entire windshield.
- Durability: Resistant to vibrations, thermal cycling, and potential clogging from impurities in washer fluid.
WindShield Wiper Housing
SKU:
66420800
$138.00
- Type: Exterior body trim panel / housing for the windshield wiper mechanism.
- Function:
- Protects the wiper motor, linkage (transmission), and associated wiring from water, debris, and environmental damage.
- Directs water run-off from the windshield away from the engine bay.
- Provides a finished aesthetic appearance at the base of the windshield.
- May integrate mounting points for washer jets or other sensors.
- Material: Typically high-grade, durable ABS plastic or a similar composite material, often UV-stabilized to prevent fading and cracking.
- Design: Precisely molded to fit the contours of the Maserati 4200’s cowl area, ensuring proper sealing against the windshield and fenders.
- Attachment: Secured by clips, screws, or a combination of fasteners, designed for firm retention while allowing for service access.
- Durability: Resistant to impact, heat, cold, and automotive chemicals.
- Components (if part of a larger assembly under this name): In some listings, this “housing” might refer to the main frame that holds the wiper motor and linkage. However, most commonly it refers to the visible exterior cover. The part number 66420800 specifically refers to a “Windshield Wiper Housing” that can be a larger assembly for the 4200.
Wiper Brush
SKU:
66959000
$21.39
-
- Type: Often conventional or beam-style (flat blade) wiper blade, designed for high-performance vehicles.
- Material: High-grade natural or synthetic rubber (e.g., EPDM, silicone) with a graphite or Teflon coating for smooth, silent operation.
- Length: Specific lengths for driver’s side and passenger’s side (e.g., approximately 22-24 inches for driver, 18-20 inches for passenger, always confirm exact lengths for your 4200).
- Attachment: Features a specific connector type (e.g., J-hook, side pin, or specific Maserati proprietary fitting) to securely mount to the wiper arm.
- Performance: Engineered for streak-free wiping, uniform pressure distribution across the glass, and quiet operation at various speeds.
- Durability: Resistant to UV degradation, extreme temperatures, and environmental contaminants for extended service life.
- Aerodynamics: May incorporate an aerodynamic design or spoiler to maintain blade contact at higher speeds.
- Package: Typically sold individually, or sometimes as a pair.
Wiring Harness with Level Sensor
SKU:
187736
$61.00
4200 Coupe (2002-2004) CC, 4200 Coupe (2002-2004) GT, 4200 Coupe (2005-2007) CC, 4200 Coupe (2005-2007) GT, 4200 Spyder (2005-2007) CC and 3 other model(s). See Fitment Details for more information.