Number Plate Roof Lighting
SKU:
198231
$37.80
- Type: Rear License Plate Illumination Lamp Assembly.
- Function: Provides clear, white light to illuminate the vehicle’s rear license plate, ensuring it is visible and legible, especially during low-light conditions or at night.
- Light Source: Typically houses a standard incandescent bulb (e.g., C5W festoon bulb) or, in later versions, an integrated LED module.
- Housing Material: Durable, weather-resistant plastic (e.g., ABS or polycarbonate) with a clear or frosted lens.
- Sealing: Designed with integrated seals (gaskets) to prevent moisture and dirt ingress, protecting the bulb and electrical contacts.
- Mounting: Direct bolt-on or clip-in installation into the designated recess on the rear of the vehicle (trunk lid/boot or bumper).
- Connectivity: Features a dedicated electrical connector for power supply from the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant automotive lighting regulations for license plate visibility (e.g., ECE R4).
- Aesthetics: Designed to integrate discreetly and seamlessly into the rear design of Maserati vehicles.
Passenger air bag – Blue “Navy”(“Navy” Blue) – 364010345
SKU:
66696715
$1,530.94
- Type: Supplemental Restraint System (SRS) Passenger’s Side Airbag Module
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
- Part Number: 364010345
- Color: Blu “Navy” (Navy Blue) to match specific Maserati interior trim codes
- Location: Integrated within the dashboard, above the glove compartment
- Deployment System: Pyrotechnic inflator, precisely controlled by the SRS control module and impact sensors
- Material: High-strength, tear-resistant coated polyamide (nylon) fabric bag concealed by a matching dashboard panel
- Safety Compliance: Engineered to meet stringent European (ECE) and relevant international automotive safety standards of its era
- Integration: Designed for seamless fit and aesthetic continuity with the Maserati 4200’s luxurious interior finishes.
Passenger side windscreen wiper arm
SKU:
66665700
$45.76
- Type: Passenger’s side windscreen wiper arm
- Material: High-strength, corrosion-resistant metal alloy (e.g., steel or aluminum) with a durable black finish (powder-coated or painted).
- Function: Connects the wiper assembly’s pivot shaft to the wiper blade on the passenger side, facilitating the sweeping motion to clear the windscreen.
- Design: Precisely contoured and dimensioned, differing from the driver’s side arm, to match the specific geometry of the Maserati 4200’s windscreen and the wiper assembly’s synchronized sweep pattern for the passenger’s field of view.
- Attachment: Features a splined or conical mounting point for secure attachment to the wiper motor shaft (or linkage output) and a specific connector type for the wiper blade (e.g., hook, side pin, push button).
- Tension: Incorporates an internal spring mechanism to maintain consistent, optimal pressure of the wiper blade against the glass, ensuring effective and streak-free clearing.
- Durability: Engineered to endure prolonged exposure to harsh environmental factors, including UV radiation, varying temperatures, rain, snow, and road debris, without compromising integrity.
- Vehicle Specificity: Designed distinctly for either Left-Hand Drive (LHD) or Right-Hand Drive (RHD) models, given the different lengths and sweep angles required based on the vehicle’s steering configuration.
Power Brake Booster Assembly
SKU:
209079
$1,000.00
- Type: A vacuum-assisted or hydraulic-assisted device that multiplies the force applied by the driver to the brake pedal, thereby reducing the effort required to engage the brakes. It is an integral part of the vehicle’s hydraulic braking system.
- Function: The primary functions of this power brake booster assembly are critical for vehicle safety and driver comfort:
- Brake Pedal Assist: Utilizes engine vacuum (or hydraulic pressure in some systems) to amplify the force exerted on the brake pedal, making it significantly easier for the driver to achieve effective braking.
- Braking Force Multiplication: Converts a relatively small amount of pedal force into a much larger force applied to the master cylinder, which then pressurizes the brake fluid to activate the calipers.
- Consistent Braking: Helps to provide a consistent and responsive brake pedal feel across various driving conditions.
- Components: Typically consists of a large, circular canister (often black) containing one or more diaphragms, check valves, and a pushrod that connects to the master cylinder. It will have a vacuum hose connection (for vacuum boosters) and mounting points to the firewall and the brake pedal linkage. The “assembly” often implies it comes ready for installation, possibly including minor seals or gaskets. It does not include the master cylinder itself, brake lines, or brake calipers.
- Location: Mounted on the firewall in the engine compartment, directly in front of the driver, between the brake pedal and the master cylinder.
- Material: Primarily constructed from steel, with durable rubber diaphragms and seals, engineered to withstand vacuum pressure (or hydraulic pressure), temperature fluctuations, and long-term use.
- Design: Precisely engineered to integrate with the specific brake pedal ratio and master cylinder of the Maserati GranCabrio, GranTurismo, and Quattroporte models, ensuring optimal braking feel, response, and performance for these high-performance vehicles.
Pulley with Self-Lubricating Bearing
SKU:
388001374
$10.99
Precise Control: Engineered to provide effective control over the handbrake mechanism, enhancing vehicle safety and performance during stationary conditions.
Radiator Grille Front
SKU:
670011097
$1,640.00
- Type: The main, prominent grille assembly located at the center of the vehicle’s front fascia, directly in front of the radiator.
- Function: The primary functions of this front grille assembly include:
- Distinctive Styling: Serves as the iconic and highly recognizable face of the Maserati Ghibli, featuring the prominent Maserati Trident emblem and unique vertical or horizontal bars that define the brand’s aesthetic. It is a crucial element of the vehicle’s luxurious and sporty appearance.
- Airflow Management: Allows cooling air to pass through to the radiator, intercooler, and other heat exchangers, which is vital for maintaining optimal engine and transmission operating temperatures.
- Protection: Provides a protective barrier for the radiator and other delicate components against larger road debris (e.g., stones, leaves, small animals).
- Sensor Integration: May incorporate provisions or mounting points for various front-facing sensors (e.g., for adaptive cruise control, parking sensors if centrally located).
- Components: Typically includes the main grille frame, the internal grille mesh or slats, and the centrally mounted Maserati Trident emblem. Depending on the specific variant or model year, it may also include chrome trim accents or specific mounting hardware.
- Location: Centrally positioned at the very front of the vehicle, within the front bumper assembly, below the hood and above the lower bumper intake.
- Material: Commonly constructed from high-grade, durable automotive plastics (e.g., ABS, polypropylene) for the main structure, often with chrome plating or painted finishes for aesthetic elements. Some variants may feature carbon fiber or gloss black accents.
- Design: Precisely sculpted to integrate seamlessly with the Ghibli’s front bumper and hood lines, ensuring a perfect fit, secure attachment, and a cohesive, premium appearance. The design also optimizes airflow for cooling while maintaining aesthetic appeal.
Rear Bumper – Front And Rear Parking Sensors
SKU:
673004365
$2,664.00
- Type: This part number refers to the main molded outer shell of the rear bumper. It is a significant exterior body panel that defines the vehicle’s rear aesthetic and integrates various systems.
- Function: The primary functions of this rear bumper cover include:
- Aesthetics & Styling: Forms the distinctive rear fascia of the Maserati Ghibli, incorporating design elements such as exhaust cutouts and reflectors, contributing significantly to the vehicle’s luxurious and sporty appearance.
- Impact Absorption: Designed to absorb and dissipate energy from minor, low-speed impacts (e.g., parking bumps), protecting underlying structural components and reducing repair costs in minor collisions.
- Integration of Systems: Features pre-molded cutouts and internal mounting provisions for essential components:
- Rear Parking Sensors: Includes the precise holes and mounting points for the rear Park Distance Control (PDC) sensors.
- Reflectors: Provides recesses for the rear reflectors.
- Exhaust Outlets: Incorporates the specific cutouts for the vehicle’s exhaust tailpipes.
- Aerodynamics: Contributes to the vehicle’s overall aerodynamic efficiency by smoothly managing airflow at the rear.
- Components: This is primarily the unpainted, molded plastic bumper shell. It typically does NOT include the actual parking sensors, reflectors, exhaust tips, or internal bumper reinforcements. These are separate components that are installed into or behind the bumper cover.
- Location: The rearmost exterior panel of the vehicle, mounted at the very back.
- Material: High-grade, impact-resistant automotive plastic (e.g., polypropylene, TPO) chosen for its flexibility, durability, and ability to be painted to match the vehicle’s body color.
- Design: Precisely contoured to match the specific body lines of the Maserati Ghibli, ensuring a factory-perfect fit, proper alignment with adjacent panels (rear fenders, trunk lid), and seamless integration of all specified sensors and lighting elements.
Rear Cross Member Assembly
SKU:
673009001
$154.00
- Type: A major structural component of the vehicle’s chassis, typically a robust, welded metal frame or cradle situated at the rear of the vehicle. As an “assembly,” it usually includes the primary cross member structure and often pre-attached bushings, mounts, or specific brackets.
- Function: The primary functions of this rear cross member assembly are crucial for the vehicle’s dynamics, safety, and structural integrity:
- Rear Suspension Mounting: Provides the primary attachment points for the complex rear independent suspension components (e.g., control arms, multi-links, shock absorber mounts), which are essential for precise wheel control, handling, and ride comfort.
- Differential Support: Serves as the robust mounting platform for the rear differential, securing it within the chassis and helping to manage torque transfer and vibrations.
- Structural Rigidity: Enhances the torsional rigidity and overall stiffness of the rear end of the vehicle, contributing to improved handling, reduced body flex, and a more refined driving feel.
- Crashworthiness: Designed as an integral part of the vehicle’s rear crash structure, absorbing and distributing impact energy in the event of a rear-end collision, thereby protecting the passenger compartment and fuel tank.
- Exhaust Routing/Mounting: May include provisions or mounting points for the exhaust system components as they pass through or attach to the rear of the vehicle.
- Components: Typically a welded steel or aluminum structure. The “assembly” (ASS.) often signifies that it comes with pre-installed rubber bushings (e.g., for subframe-to-chassis attachment), and potentially some minor brackets. It generally does not include the differential, drive shafts, or individual suspension arms, as these are separate components that bolt onto the cross member.
- Location: Situated at the rear underside of the vehicle, spanning across the width of the chassis, beneath the trunk/boot floor.
- Material: High-strength steel alloys for robust designs or lightweight aluminum alloys for reduced unsprung mass and enhanced performance, chosen for their superior strength-to-weight ratio and ability to absorb impact energy.
- Design: Precisely engineered and manufactured with specific mounting points and geometry to ensure exact alignment of the drivetrain and rear suspension components, critical for the Maserati Ghibli’s sophisticated handling characteristics and ride quality.
Rear Passenger Compartment Floor Panel (Carpet Assembly) – Sand
SKU:
670070071
$224.00
- Type: This part number refers to a major section of the interior carpet that covers the rear passenger floor area. It is a pre-cut and pre-formed carpet assembly designed to fit precisely over the vehicle’s rear floor pan.
- Function: The primary functions of this floor panel/carpet include:
- Aesthetics & Luxury: Defines the floor aesthetic of the rear passenger compartment, contributing significantly to the luxurious ambiance and premium finish of the Maserati interior, especially in the specified “Sand” color.
- Foot Comfort: Provides a soft and comfortable surface for rear passengers’ feet.
- Sound & Thermal Insulation: Helps to absorb road noise and vibrations, contributing to a quieter cabin. It also offers a degree of thermal insulation, reducing heat transfer from the underbody.
- Protection: Shields the underlying metal floor pan from dirt, wear, spills, and minor impacts.
- Integration: Features precise cutouts and contours to accommodate seat mounting points, center console extensions, seat belt anchorages, and other floor-mounted components.
- Components: The assembly typically consists of a durable, automotive-grade carpet material (often a high-quality cut pile or loop pile) laminated to a sound-deadening and insulating backing material. It comes as a single, large, pre-shaped piece. It does not include the actual seats, seat belts, or floor mats.
- Location: Covers the entire floor area of the rear passenger compartment, from behind the front seats to the base of the rear seats.
- Material: High-quality, durable textile carpet with a robust backing, specifically dyed to the “Sand” interior color specification for Maserati Ghibli models.
- Design: Precisely molded and cut to fit the complex contours of the Ghibli’s rear floor pan, including the transmission tunnel, ensuring a snug fit, preventing shifting, and maintaining the vehicle’s factory-level finish
Red Valet Key One Button
SKU:
980001802
$213.00
- Type: Integrated remote key fob, combining a physical ignition key blade with a simplified remote control.
- Color: Distinctive red casing, often used by manufacturers to denote a valet or limited-access key.
- Buttons: Typically features a single button for remote lock/unlock functionality, or sometimes just a lock function, depending on the precise design and intended limitation.
- Internal Components: Contains a transponder chip (for immobilizer function) and a basic remote control circuit board powered by a small battery.
- Key Blade: Includes an un-cut or pre-cut metal key blade that mechanically operates the ignition and door locks.
- Security Features: The integrated transponder chip is crucial for the vehicle’s immobilizer system, allowing the engine to start only when an authorized key is detected.
- Valet-Specific Limitations: Designed to offer limited access or functionality. While it can start the car, it typically cannot unlock the trunk/boot or glovebox, or it may disable certain infotainment features when in use, protecting personal belongings and settings when the car is handed over for valet service.
- Material: Durable molded plastic casing.
- Programming: Requires specialized programming by a Maserati dealership or a qualified automotive locksmith to synchronize the remote functions with the vehicle’s Body Control Module (BCM) and to code the transponder chip to the Immobilizer ECU for engine starting.
RH Front Pillar Member Reinforcement
SKU:
673000406
$65.00
- Type: A high-strength, precision-formed steel or advanced alloy component designed to significantly strengthen the vehicle’s right-hand A-pillar (the pillar connecting the front roof rail to the front fender and firewall, adjacent to the windshield).
- Function: The primary and most critical functions of this reinforcement are directly related to vehicle safety and structural integrity:
- Occupant Protection in Collisions: Crucially reinforces the A-pillar to resist deformation during frontal impacts and, even more critically, in rollover accidents. It helps maintain the structural integrity of the passenger safety cell, preventing intrusion into the cabin.
- Roof Strength: Contributes significantly to the overall roof strength, minimizing crush in the event of a rollover.
- Structural Rigidity: Enhances the torsional rigidity and overall stiffness of the vehicle’s body-in-white, contributing to improved handling, reduced body flex, and a quieter ride.
- Component Mounting: Provides robust internal mounting points for various components that pass through or attach to the A-pillar, such as wiring harnesses, safety systems (e.g., side curtain airbags), and interior trim.
- Components: Typically a single, complexly shaped panel or series of panels fabricated from high-strength, often hot-stamped, steel or specialized alloys. It features specific flanges, bends, and sometimes pre-drilled holes for spot welding, adhesive bonding, or other attachment methods to the outer and inner A-pillar panels.
- Location: Integrated internally within the right-hand A-pillar structure, sandwiched between the outer A-pillar skin and the inner A-pillar trim panels. It extends from the base of the windshield area up towards the roof rail.
- Material: Predominantly high-strength steel (HSS), Ultra-High Strength Steel (UHSS), or tailored blanks for optimal energy absorption and structural performance. These materials are chosen for their superior yield strength and ability to maintain shape under extreme forces.
- Design: Precisely engineered to fit the intricate internal contours of the A-pillar, ensuring maximum reinforcement, controlled deformation characteristics in a crash, and compatibility with the vehicle’s overall safety architecture.
RH HeadLight
SKU:
190712050
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Primarily utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Depending on the original vehicle specification, it may accommodate Xenon (HID) bulbs and ballasts.
- Lens Material: High-grade, UV-stabilized polycarbonate or glass for superior clarity and resistance to hazing or yellowing over time.
- Housing Material: Durable, heat-resistant, and impact-resistant plastic (e.g., polypropylene) designed to protect internal components and dissipate heat effectively.
- Mounting: Engineered for a direct bolt-on replacement, ensuring precise alignment and fitment with existing factory mounting points on the Maserati 4200’s chassis.
- Connectivity: Equipped with integrated electrical connectors for seamless plug-and-play connection to the vehicle’s wiring harness.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) for optimal light distribution and safety.
- Aesthetics: Designed to perfectly complement the iconic front fascia of the Maserati 4200, preserving its original luxurious and sporty appearance.
RH HeadLight
SKU:
980000928
$359.75
- Type: Complete Right-Hand (RH) Headlight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Lighting Technology: Typically Halogen-based for main low and high beams. Includes integrated turn signal, parking light, and potentially side marker functions.
- Lens Material: Durable, high-clarity polycarbonate or glass, often treated with a UV-protective coating to resist yellowing, hazing, and cracking over time.
- Housing Material: Robust, heat-resistant, and impact-resistant plastic (e.g., polypropylene) forming the main body of the assembly, designed to protect internal components and dissipate heat.
- Reflectors/Projectors: Precisely engineered internal reflectors to optimally direct the light beam for maximum illumination and minimal glare, or a projector lens system (depending on design variant).
- Mounting: Designed for direct, bolt-on replacement, ensuring perfect fitment and alignment with the Maserati 4200’s front fascia and existing chassis mounting points.
- Connectivity: Features integrated electrical connectors for plug-and-play installation, connecting seamlessly with the vehicle’s electrical harness.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) for light output, pattern, and safety.
- Aesthetics: Matches the original factory design and finish of the Maserati 4200, preserving the vehicle’s distinctive and elegant front-end appearance.
RH HeadLight – Giallo GranTurismo
SKU:
190712046
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Typically utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Some models may have Xenon (HID) options depending on original specification.
- Lens Material: High-clarity polycarbonate or glass, UV-treated for resistance against yellowing and hazing.
- Housing Material: Durable, heat-resistant plastic (e.g., polypropylene), designed for optimal heat dissipation and protection of internal components.
- Mounting: Direct bolt-on replacement, matching original factory mounting points for precise fitment and alignment.
- Connectivity: Features integrated electrical connectors for plug-and-play installation with the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets).
- Aesthetics: Designed to seamlessly integrate with the Maserati 4200’s distinct front fascia, maintaining its iconic styling.
RH Longitudinal Harness
SKU:
200678
$672.00
- Type: A major, extensive electrical wiring loom that runs along the right-hand (passenger) side of the vehicle’s underbody or chassis.
- Function: This harness acts as a crucial electrical distribution pathway, carrying power, ground, and data signals to various components located along the right longitudinal section of the Maserati. It connects elements from the front of the vehicle to the rear, serving a multitude of systems including:
- Fuel System: Potentially fuel pump power, fuel level sender, and EVAP system components.
- Rear Lighting: Taillights, brake lights, turn signals, reverse lights on the right side.
- Rear Sensors: Parking sensors, wheel speed sensors (ABS/ESP) for the right rear wheel, suspension sensors.
- Exhaust System Sensors: Oxygen sensors (post-catalytic converter) or temperature sensors.
- Body Control Modules/Relay Boxes: Connecting to any localized control units or relay boxes in the rear or side sections.
- Other Ancillary Systems: Various modules or actuators positioned along the right side of the undercarriage or within the rear quarter panel.
- Complexity: A highly complex and lengthy harness with numerous branches, multi-pin connectors, various wire gauges, and often protective sheathing, designed to withstand external environmental factors.
- Location: Primarily routed along the vehicle’s right-hand chassis rail, underbody, or within the right rear quarter panel, connecting to the main body harness in the cabin or engine bay.
- Material: High-quality, automotive-grade copper wire with robust, weather-resistant, and abrasion-resistant insulation. Connectors are typically sealed and designed to prevent moisture and dirt ingress, crucial for underbody exposure.
- Design: Precisely engineered for routing along the vehicle’s frame, with specific lengths and connector orientations for each component, ensuring secure mounting and protection from road debris, moisture, heat, and vibration.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 chassis and components on the right-hand side. It is distinct from the left-hand longitudinal harness.
RH Rear TailLight
SKU:
195847
$282.85
- Type: Complete Right-Hand (RH) Rear Taillight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Function: Integrates multiple lighting functions including:
- Brake Light: Red, illuminates brightly when brakes are applied.
- Running/Tail Light: Red, continuous illumination for rear visibility.
- Turn Signal/Indicator: Amber, flashing light for signaling turns or lane changes.
- Reverse/Backup Light: White, illuminates when reverse gear is engaged.
- Rear Fog Light (if applicable): Red, typically brighter than running lights, for low visibility.
- Light Source: Primarily uses incandescent bulbs for various functions, though some aftermarket or specific market variants might incorporate LEDs.
- Lens Material: Durable, high-quality, impact-resistant polycarbonate or acrylic plastic, designed for optimal light transmission and color integrity.
- Housing Material: Robust, sealed plastic housing that protects internal wiring, bulb sockets, and reflectors from moisture, dust, and vibration.
- Mounting: Designed for direct, bolt-on replacement, ensuring precise fitment and alignment with the Maserati 4200’s rear bodywork.
- Connectivity: Features a dedicated multi-pin electrical connector for plug-and-play integration with the vehicle’s rear wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE R7, R6, R23, R38) for light output, color, and pattern.
- Aesthetics: Matches the original factory design, contributing significantly to the Maserati 4200’s distinctive and elegant rear styling.
RH Upper Strut Mount
SKU:
673002754
$140.00
- Type: A specialized mounting component that connects the top of the front right-hand (RH) shock absorber (strut) to the vehicle’s chassis, specifically the strut tower in the engine bay.
- Function: The primary functions of this upper strut mount include:
- Secure Attachment: Provides a robust and flexible connection point for the shock absorber to the vehicle’s body structure.
- Vibration and Noise Isolation: Contains a rubber or composite isolator that dampens vibrations and road noise transmitted from the suspension to the chassis and cabin, contributing significantly to ride comfort and refinement.
- Bearing Function: Often incorporates a bearing (e.g., a spherical bearing or rubber/metal bushing) to allow the shock absorber and spring assembly to pivot freely with steering input, which is crucial for precise steering and suspension movement.
- Suspension Travel: Accommodates the vertical movement of the shock absorber and spring as the suspension compresses and rebounds.
- Components: Typically consists of a metal housing (often stamped steel or aluminum) with an integrated rubber isolator and a bearing (either ball bearing or a high-performance bushing). It will have threaded studs or holes for mounting to the strut tower and a central opening/mount for the top of the shock absorber rod.
- Location: Mounted at the top of the right-hand front shock absorber, inside the engine bay, connecting it to the vehicle’s strut tower.
- Material: High-strength steel or aluminum for the structural components, combined with specially formulated rubber or synthetic compounds for the isolator, designed for durability, flexibility, and resistance to environmental factors.
- Design: Precisely engineered to fit the specific dimensions and load requirements of the Maserati Ghibli’s front suspension system, ensuring proper alignment, optimal damping performance, and long-term reliability.
Rivet
SKU:
675000399
$3.00
- Type: A specialized, permanent fastener. For this part number in modern Maserati vehicles, it typically refers to a blind rivet (also commonly known as a “pop rivet”). This type of rivet is designed to be installed from one side of a workpiece.
- Function: The primary function of this rivet is to securely join two or more components together, forming a strong and permanent mechanical bond. In luxury automotive applications like Maserati, these rivets are used for:
- Attaching trim panels: Securing various interior and exterior trim pieces, molding, and badges.
- Mounting minor components: Fastening smaller brackets, covers, and non-structural parts within the body, chassis, or engine bay.
- Securing liners and shields: Holding wheel arch liners, underbody shields, splash guards, and other protective components in place.
- Components: Consists of a cylindrical body (rivet sleeve) with a head at one end, and a mandrel (pin) that extends through the center. During installation, the mandrel is pulled, deforming the blind end of the rivet and creating a secure joint.
- Location: Used throughout the vehicle in various locations where a permanent, single-sided fastening solution is required. Common areas include body panels (especially for trim attachment), wheel arches, underbody, and interior cabin.
- Material: Typically made from aluminum alloy for corrosion resistance and light weight, or steel for higher strength applications. The specific material will be selected based on the strength and environmental requirements of its intended application.
- Design: Engineered with specific dimensions (diameter and grip range) and head type (e.g., dome, countersunk, large flange) to ensure a precise fit and secure fastening for the components it joins in the Ghibli and Quattroporte models.
Roof External Trim
SKU:
673001693
$824.00
- Type: A decorative and functional trim piece installed along the outer edges of the roofline, typically running from the front A-pillar to the rear C-pillar, often encompassing or defining the rain gutter channel.
- Function: The primary functions of this roof external trim include:
- Aesthetics: Provides a clean, finished appearance to the transition between the roof panel and the side body panels, enhancing the vehicle’s exterior styling and concealing welding seams or panel joints.
- Water Management: Often forms part of the roof’s rain gutter system, directing rainwater off the roof and down the pillars, preventing it from streaming down the side windows or directly onto the doors.
- Sealing: Can contribute to the sealing system, helping to prevent water or wind intrusion into the cabin or roof structure.
- Aerodynamics (Minor): Can have a minor role in smoothing airflow over the roof edges.
- Components: Typically a single, long, pre-formed strip or molded piece. It is designed with specific clips, channels, or adhesive points for secure attachment to the roof structure. Depending on the design, it might be a multi-piece set for left and right sides, or one continuous piece. The part number suggests a specific side or a particular design variant.
- Location: Runs along the outer edge of the roof, above the side windows, on either the left or right side, or both, depending on the specific design for the Ghibli.
- Material: Commonly made from durable automotive plastics (e.g., ABS, PVC) with a painted finish (e.g., gloss black, body color) or from polished/anodized aluminum or chrome-plated metal for a premium appearance. Chosen for weather resistance, UV stability, and durability.
- Design: Precisely contoured to follow the elegant lines of the Maserati Ghibli’s roof, ensuring a flush fit, secure attachment, and seamless integration with the vehicle’s overall exterior design.
Roof Light wiring Harness
SKU:
200498
$48.00
- Type: A dedicated electrical wiring harness designed to power and control components located in the vehicle’s headliner and overhead console area.
- Function: This harness provides the electrical connections for all functions typically found in the roof and overhead console. This includes:
- Interior Dome Lights / Map Lights: Providing illumination for the cabin.
- Courtesy Lights: Often integrated into the overhead console, illuminating when doors are opened.
- Sunroof Controls: If the vehicle is equipped with a sunroof (though rare on 4200 coupes, some aftermarket or specific market options might exist), this harness would carry its power and control signals.
- Microphone for Hands-Free System: If the vehicle has a factory-installed Bluetooth or hands-free system, the microphone wiring is often routed through here.
- Alarm System Sensors: Volumetric or anti-theft sensors sometimes located in the overhead console.
- Homelink/Garage Door Opener Controls: If integrated into the overhead console.
- Complexity: A relatively compact harness with specific connectors for the roof lights, switches, and any other overhead modules, designed to integrate seamlessly into the headliner structure.
- Location: Primarily routed along the roof line and within the headliner, connecting the overhead console to the vehicle’s main body wiring harness, often near the A-pillar.
- Material: High-quality, automotive-grade copper wire with flexible insulation, designed for concealed routing. Connectors are robust and specifically designed for the delicate electrical components in the overhead console.
- Design: Precisely molded and routed to fit the contours of the roof interior, ensuring secure fitment and preventing pinching or abrasion when the headliner is installed.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 Coupe’s interior roof architecture.
Roof Upholstery Assembly (Headliner) – Zegna Edition with Maserati Touch Control Plus & Navigation – Charcoal (Mexico Market)
SKU:
670061443
$5,343.00
- Type: A complete, pre-formed headliner assembly that covers the entire interior roof structure. This specific variant is a premium “Zegna Edition” component, indicating high-quality materials and finishes.
- Function: The primary functions of this roof upholstery assembly include:
- Aesthetics & Luxury: Defines the overhead interior aesthetic, contributing significantly to the luxurious ambiance and bespoke feel of the Zegna Edition interior. The “Charcoal” color adds to the sophisticated cabin design.
- Sound Dampening: Provides insulation against exterior noise (road, wind, rain) and vibrations, contributing to a quieter and more refined cabin experience.
- Thermal Insulation: Helps to insulate the cabin, maintaining a more stable interior temperature by reducing heat transfer from the roof.
- Safety Integration: Incorporates precise cutouts and mounting points for overhead components such as interior lights, sunroof controls (if applicable), grab handles, sun visors, and microphones (critical for Maserati Touch Control Plus with Navigation).
- Impact Protection (Minor): Offers a degree of soft padding against head impacts in a collision.
- Zegna Edition Features: Characterized by the use of premium materials, often including silk, fine wool, or specialized fabrics produced by Ermenegildo Zegna, elevating the tactile and visual luxury compared to standard headliners.
- MTC+ with Navigation Compatibility: Designed with specific provisions and wiring channels for the overhead console components related to the Maserati Touch Control Plus infotainment system, particularly microphones for voice commands and connectivity for the navigation system.
- Mexico Market Specificity: May feature slight variations in material, fire retardancy standards, or specific accessory provisions tailored to regulatory requirements or consumer preferences in the Mexican market.
- Components: The assembly includes the rigid backing board, the Zegna-specific upholstery material laminated to it, and pre-cut openings for all overhead fixtures. It generally does NOT include the actual lights, switches, grab handles, sun visors, or sunroof module, as these are separate bolt-on components.
- Location: Forms the interior ceiling of the vehicle cabin.
- Material: High-quality, specially sourced Zegna textile (e.g., silk or fine wool blend) laminated to a rigid, lightweight composite backing board, often with integrated foam layers for insulation.
- Design: Precisely molded to the exact contours of the Maserati Ghibli’s roof, ensuring a seamless fit, tight integration with pillars, and a high-quality finish that complements the exclusive Zegna interior package.
Sheets and Door Opening Kit
SKU:
980001803
$414.00
- Type: A specialized electronic kit designed to support or integrate components of the vehicle’s central door locking, remote keyless entry, and potentially the immobilizer system.
- Function: Facilitates the electronic communication and control necessary for remote door locking/unlocking, and potentially aspects of the vehicle’s anti-theft immobilizer system. The “Sheets” component could refer to programming instructions, circuit diagrams, or specific electronic modules. The “Door Opening” aspect points to the central locking receiver or a related component that interprets signals from a remote key fob (specifically noted as “One button” telecontrol).
- Components: Likely includes an electronic module (receiver/controller), associated wiring, and possibly specific “sheets” which could be internal circuit boards or specialized transponder/receiver elements. It is designed to work with a one-button remote key (telecontrol).
- Security & Convenience Role: Integral to the remote keyless entry system, allowing the convenient locking and unlocking of doors from a distance. It also plays a role in the secure operation of the vehicle’s immobilizer by enabling communication between the key and the vehicle’s anti-theft systems.
- Programming: The kit is explicitly noted as “Programmable,” meaning professional programming and synchronization with the vehicle’s existing security modules (like the Immobilizer ECU and other keys) are required for correct functionality.
- Market Specificity: Identified as “Not for USA and CDN” (Canada) markets, suggesting regional differences in alarm or remote entry systems.
- Material: Electronic components housed in durable plastic casing, with automotive-grade wiring.
- Durability: Designed for reliable electronic operation within the vehicle’s cabin environment.
Sheets and Door Opening/Alarm Kit
SKU:
980001805
$541.00
- Type: Comprehensive electronic kit encompassing components for the vehicle’s central door locking, remote keyless entry, and integrated anti-theft alarm system.
- Function: This kit serves as a central control module or a set of core components that manage the sophisticated functions of:
- Remote Keyless Entry: Receiving signals from the remote key fob to remotely lock and unlock vehicle doors.
- Central Door Locking: Electrically controlling all vehicle door locks simultaneously.
- Anti-Theft Alarm System: Monitoring various inputs (door sensors, hood sensor, trunk sensor, interior volumetric sensors, tilt sensor) and triggering the alarm (horn, flashing lights) upon unauthorized entry or movement.
- Integration with Immobilizer: While the immobilizer ECU (P/N 60673131) is a separate key-recognition unit, this kit often communicates with it to ensure system coherence.
- Components: Likely includes the main control module for the central locking and alarm, associated wiring harnesses, potentially specific receivers, and possibly other related electronic sub-components. It’s designed to interface with the vehicle’s existing sensors and actuators.
- Security & Convenience Role: Provides both the convenience of remote access and the vital security layer of an active alarm system to protect the vehicle from theft and unauthorized access.
- Programming: Requires specialized programming and synchronization with the vehicle’s existing electronic architecture (including keys, immobilizer, and body control modules) for full functionality. This typically necessitates dealer-level diagnostic tools.
- Material: Electronic components housed in durable, protective casings, with high-quality automotive-grade wiring.
- Durability: Engineered for reliable electronic operation and security functions within the vehicle’s environment.