Front Underbody Guard
SKU:
66232900
$190.00
- Type: A protective panel designed to be mounted underneath the front section of the vehicle, typically beneath the engine and transmission area. It is commonly referred to as an undertray, splash shield, or engine guard.
- Function: This front underbody guard serves several crucial purposes:
- Protection: Shields vital components such as the engine oil pan, transmission, steering rack, exhaust components, and various hoses and wiring from road debris, stones, water, salt, and other contaminants encountered during driving.
- Aerodynamics: Contributes to the vehicle’s aerodynamic efficiency by smoothing the airflow underneath the car, reducing turbulence, lift, and drag, which can improve stability and fuel economy at higher speeds.
- Noise Reduction: Helps to dampen road noise and engine sounds, contributing to a quieter cabin environment.
- Heat Management: Can help to direct airflow for cooling or, conversely, act as a barrier to retain heat in certain areas, depending on its specific design.
- Components: Typically a single, large, molded panel. It will feature pre-drilled holes for mounting fasteners (bolts, clips) and may have integrated channels or vents for specific airflow or drainage.
- Location: Spans the underside of the front of the vehicle, extending from behind the front bumper area backwards, underneath the engine and sometimes partially under the transmission.
- Material: Usually made from durable, impact-resistant automotive-grade plastic (e.g., polypropylene, ABS) or, in some performance applications, a lightweight composite material. It’s designed to withstand minor impacts and environmental exposure.
- Design: Precisely contoured to fit the specific underbody shape of the Maserati 4200,
Fuses Cover
SKU:
980138226
$159.00
- Type: A molded plastic cover designed to protect a specific fuse box assembly.
- Function: The primary purpose of this cover is to shield the electrical fuses and relays within the fuse box from environmental elements such as moisture, dust, dirt, and physical damage. It also helps to prevent accidental contact with live electrical terminals, ensuring safety. Often, fuse covers have a diagram or legend molded into their underside, indicating the function and amperage of each fuse/relay, which is crucial for troubleshooting and maintenance.
- Components: Typically a single, rigid plastic piece with specific clips, tabs, or a sealing gasket designed to fit snugly over the fuse box.
- Location: Maserati 4200s typically have multiple fuse boxes. Part Number 980138226 is commonly associated with an internal or engine bay fuse box, given its function. Precise location (e.g., driver’s footwell, passenger footwell, engine bay, trunk) would depend on the specific vehicle’s electrical layout for this part number.
- Material: Durable, heat-resistant automotive-grade plastic, often with properties to withstand oil, chemicals, and UV exposure depending on its location (engine bay vs. cabin).
- Design: Precisely molded to fit the contours of the specific fuse box it covers, with designated slots or channels for wiring harnesses to pass through without compromising the seal.
GearBox Control Unit
SKU:
980002111
$1,521.00
- Type: A sophisticated electronic control unit (ECU) dedicated to managing the operation of the vehicle’s transmission. For the Maserati 4200, this primarily refers to the Cambiocorsa (F1) automated manual transmission.
- Function: The TCU acts as the “brain” of the transmission system. It continuously monitors various sensor inputs related to vehicle speed, engine RPM, throttle position, gear position, clutch position, hydraulic pressure, and driver inputs (e.g., paddle shifters, gear lever). Based on this data and pre-programmed shift maps, the TCU precisely controls:
- Gear Selection and Engagement: Commanding the gear actuators to engage the correct gears.
- Clutch Engagement and Disengagement: Managing the hydraulic clutch for smooth starts and shifts.
- Shift Timing and Logic: Optimizing shift points for performance, comfort, and efficiency.
- Hydraulic Pump Operation: Controlling the F1 system’s hydraulic pump to maintain necessary pressure.
- Diagnostic Monitoring: Continuously checking for faults within the transmission system and storing diagnostic trouble codes (DTCs).
- Components: A self-contained electronic module containing a powerful microprocessor, memory (for software and learned parameters), and various input/output circuits for sensor signals and actuator control. Encased in a durable housing with a multi-pin electrical connector.
- Location: Typically found either in the engine compartment (often near the battery or firewall) or sometimes within the cabin (e.g., under a seat or behind dashboard trim), where it is connected to the transmission wiring harness and the vehicle’s main electrical network.
- Material: Robust metal or high-grade plastic casing to protect sensitive internal electronics from heat, vibration, and moisture.
- Design: Engineered for high-speed data processing and precise real-time control, crucial for the dynamic nature of an automated manual transmission.
- Compatibility: Essential for the proper operation of the Cambiocorsa (F1) transmission in the Maserati 4200. This specific part number may correspond to a particular software revision, market specification, or model year range.
GPS Navigation Wiring Harness
SKU:
200501
$205.00
- Type: A dedicated electrical wiring harness designed to integrate and power the components of the vehicle’s factory GPS navigation system.
- Function: This harness provides the necessary electrical connections and data pathways for all elements of the GPS navigation system. This typically includes:
- Navigation Unit (NIT unit): The main control module for the navigation system, often located in the trunk or under the armrest.
- GPS Antenna: Receiving satellite signals for positioning.
- Display Screen: The screen on the dashboard that displays maps and navigation information.
- Input Controls: Buttons or interfaces used to operate the navigation system.
- Power and Ground: Supplying power to the navigation components and ensuring proper grounding.
- Data Communication: Enabling communication between the navigation unit, display, and other vehicle systems (e.g., vehicle speed sensor, reverse signal for accurate positioning).
- Complexity: Features multiple branches and specialized connectors specific to the navigation unit, antenna, display, and integration points with the vehicle’s main electrical system. It often includes shielded cables to protect sensitive GPS and data signals from interference.
- Location: Routed throughout various parts of the vehicle, from the dashboard area (for the display and controls) to the trunk/boot (for the main navigation unit) and potentially the roof or dashboard for the GPS antenna.
- Material: High-quality, automotive-grade copper wire with durable insulation, and robust, often keyed, plastic connectors to ensure secure and correct connections.
- Design: Precisely engineered for routing within the vehicle’s interior, ensuring secure fitment and protection from strain or interference.
- Compatibility: Exclusively designed for Maserati 4200 models equipped with the original factory GPS navigation system. It is not generally interchangeable with non-navigation equipped vehicles or aftermarket systems without significant modification.
HeadLamp Actuator
SKU:
980000950
$45.44
- Type: Electric motor / stepper motor-based actuator.
- Function: Adjusts the vertical angle (aim) of the headlight beam to compensate for vehicle load changes (e.g., passengers, luggage) or road incline, ensuring optimal light projection.
- Integration: Part of the automatic headlight leveling system (standard on Xenon-equipped models, optional on some Halogen setups). Receives commands from the vehicle’s leveling control unit (which takes input from ride-height sensors).
- Voltage: 12V DC.
- Connectivity: Features a dedicated electrical connector for power and control signals.
- Mounting: Integrated directly into the rear of the headlight assembly, connecting to the internal reflector or projector mechanism.
- Material: Durable plastic housing with precise internal gearing and motor components.
- Durability: Designed for smooth, silent, and reliable operation over the vehicle’s lifetime, resisting vibrations and temperature variations.
- Compatibility: Specific to the Maserati 3200 and 4200 headlight assemblies for which it was designed, ensuring exact fit and calibration.
Headlight Bulb
SKU:
980000953
$22.91
- Bulb Type: Halogen H1
- Filament: Single filament
- Voltage: 12V
- Wattage: 55W (Standard)
- Base Type: P14.5s
- Luminous Flux (Typical): Approximately 1550 lumens
- Color Temperature: Around (Warm White/Yellowish)
- Lifespan: Standard halogen lifespan (typically 250-450 hours of operation)
- Regulatory Compliance: Designed to meet ECE (Economic Commission for Europe) regulations for automotive lighting.
- Material: Quartz glass envelope (UV-filtered) with a tungsten filament.
IGE electronic Module
SKU:
195979
$425.00
- Type: An electronic control unit (ECU) referred to as the “IGE Module,” which functions as a gateway or interface for communication between various vehicle systems, particularly those related to the instrument panel and possibly body electronics. The acronym “IGE” often stands for “Instrument Panel Gateway Electronic.”
- Function: This module plays a crucial role in the vehicle’s electrical architecture by facilitating data exchange between different ECUs and components. Its primary functions include:
- Data Translation/Gateway: Converts and routes data signals between different communication networks (e.g., CAN-bus, K-Line) within the vehicle, ensuring that various control units can “talk” to each other.
- Instrument Panel Integration: Processes and relays information to and from the instrument cluster, ensuring accurate display of vehicle speed, RPM, fuel level, temperature, warning lights, and other vital information.
- Input/Output Processing: May receive inputs from various sensors and switches throughout the vehicle and process them for display on the instrument panel or for use by other control units.
- Diagnostic Interface: Serves as a point of access for diagnostic tools to communicate with the instrument panel and potentially other integrated systems.
- Components: A self-contained electronic unit with internal processors, memory, and multiple input/output ports for connecting to various vehicle wiring harnesses.
- Location: Typically located behind the dashboard, often in close proximity to the instrument cluster, making it accessible for wiring connections.
- Material: Durable plastic casing housing sensitive electronic circuit boards.
- Design: A complex, integrated electronic device engineered to withstand the automotive environment, including temperature fluctuations and vibration.
- Compatibility: Essential for the proper operation of the instrument panel and inter-module communication in the Maserati 4200. This specific part number corresponds to a particular revision or software version.
Immobilizer ECU
SKU:
IMMOBILIZER ECU For Maserati 4200 Part Number: 60673131
$124.00
- Type: Dedicated electronic control unit (ECU) for the vehicle’s passive anti-theft system.
- Function: Manages the vehicle’s immobilizer system. It communicates with the transponder chip embedded in the vehicle’s ignition key and the Engine Control Unit (ECU) to ensure that the engine can only be started with an authorized, correctly coded key.
- Security Role: Provides a critical layer of anti-theft protection by preventing the engine from starting if an unauthorized key or an incorrect key code is detected, even if the vehicle is hot-wired.
- Communication: Communicates via a data bus (e.g., CAN bus or serial data line) with the engine ECU and often with an antenna ring around the ignition barrel that reads the key’s transponder.
- Programming: Typically requires specialized programming (e.g., with Maserati diagnostic tools) to “learn” new keys or synchronize with a new engine ECU. It cannot simply be swapped between vehicles.
- Location: Often located within the dashboard behind the glovebox, or sometimes integrated near the steering column or main fuse box, providing a secure, tamper-resistant installation.
- Material: Robust plastic housing protecting sensitive internal electronic components and circuitry.
- Durability: Designed for long-term reliability as a vital security component.
Info Center Switches Plate
SKU:
67696027
$3,532.25
- Type: Dashboard control panel or fascia that integrates multiple buttons and switches for the vehicle’s infotainment system, climate control, and potentially other auxiliary functions.
- Function: Provides the tactile interface for the driver and passenger to control various cabin features, including:
- Radio/CD player (power, volume, track selection, mode)
- Climate control (temperature, fan speed, airflow direction, A/C on/off, recirculation)
- Navigation system (if equipped)
- Other dashboard functions (e.g., trip computer reset, clock settings).
- Location: Typically situated in the central dashboard area, below the main display screen (if present) and above the climate control vents.
- Material: High-quality automotive-grade plastic, often finished with a matte black, soft-touch, or painted surface to match the Maserati’s interior aesthetics. Buttons are typically rubberized or hard plastic with illuminated symbols.
- Components: Consists of the molded plastic plate itself, individual button caps, and underlying switch mechanisms or contact pads. Illumination elements (LEDs or bulbs) are integrated.
- Connectivity: Features electrical connectors on the rear to interface with the vehicle’s wiring harness and control modules.
- Design: Ergonomically designed for ease of use, with clear labeling and intuitive layout, maintaining the luxurious and driver-focused interior design of the Maserati 4200.
- Durability: Built to withstand repeated use, but susceptible to wear, fading, or sticky/peeling surface issues common in vehicles of this age, especially in hot and humid climates.
Keys and Blocks Kit
SKU:
980001808
$904.58
- Type: A comprehensive, factory-matched security system kit designed for specific market regions.
- Function: This kit is designed to replace or initialize the core components of the vehicle’s immobilizer and access system, ensuring all included parts (keys, immobilizer modules, lock cylinders) are precisely matched and synchronized. It is typically required in critical situations such as the loss of all original keys, a major failure of the immobilizer system, or specific theft recovery scenarios.
- Key Features (specific to this P/N):
- Two-Button Keys: Includes one or more new remote key fobs that feature two buttons (typically lock and unlock functions). These keys also contain the transponder chip essential for engine start authorization.
- Market Specificity: Explicitly designated as “Valid for USA and CDN” (USA and Canada), indicating it complies with the specific radio frequencies and security protocols used in these regions.
- Typical Components (may include, but not limited to):
- New remote key fob(s) with two buttons.
- The main Immobilizer Control Unit (ECU) pre-coded to the new keys.
- Matched lock cylinders/barrels for the ignition, doors, and potentially the trunk/boot, all keyed to the new physical keys.
- A Code Card containing vital electronic and mechanical codes for the system.
- Security Role: Provides the highest level of anti-theft protection by ensuring that only correctly programmed keys and matching immobilizer components can start and operate the vehicle, effectively preventing engine ignition by unauthorized means.
- Programming: Although the components are factory-matched within the kit, complex programming and synchronization with the vehicle’s Body Control Module (BCM) and other ECUs are absolutely required after installation. This highly specialized procedure necessitates proprietary Maserati diagnostic equipment and skilled technicians.
- Material: Comprised of high-quality automotive-grade components, including robust metals for lock cylinders, durable plastics for key fobs and ECU housings, and precision electronics.
- Durability: Manufactured to Maserati’s rigorous standards, ensuring long-term reliability and security performance.
LH Longitudinal Harness
SKU:
200507
$176.00
- Type: A major, extensive electrical wiring loom that runs along the left-hand (driver’s) side of the vehicle, often routed along the chassis, underbody, or within the interior cabin structure.
- Function: This harness acts as a crucial electrical distribution pathway, carrying power, ground, and data signals to various components located along the left longitudinal section of the Maserati. It connects elements from the front of the vehicle to the rear, serving a multitude of systems including:
- Fuel System: Potentially fuel pump power, fuel level sender, and EVAP system components, if routed on this side.
- Rear Lighting: Taillights, brake lights, turn signals, reverse lights on the left side.
- Rear Sensors: Parking sensors, wheel speed sensors (ABS/ESP) for the left rear wheel, suspension sensors.
- Exhaust System Sensors: Oxygen sensors (post-catalytic converter) or temperature sensors.
- Body Control Modules/Relay Boxes: Connecting to any localized control units or relay boxes in the rear or side sections.
- Other Ancillary Systems: Various modules or actuators positioned along the left side of the undercarriage or within the rear quarter panel, or even specific interior components that draw power from this side’s main loom.
- Complexity: A highly complex and lengthy harness with numerous branches, multi-pin connectors, various wire gauges, and often protective sheathing, designed to withstand environmental factors.
- Location: Primarily routed along the vehicle’s left-hand chassis rail, underbody, or within the left rear quarter panel/sill area, connecting to the main body harness in the cabin or engine bay.
- Material: High-quality, automotive-grade copper wire with robust, weather-resistant, and abrasion-resistant insulation. Connectors are typically sealed and designed to prevent moisture and dirt ingress, crucial for underbody exposure.
- Design: Precisely engineered for routing along the vehicle’s frame, with specific lengths and connector orientations for each component, ensuring secure mounting and protection from road debris, moisture, heat, and vibration.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 chassis and components on the left-hand side. It is distinct from the right-hand longitudinal harness (e.g., P/N 200678).
Maserati Mark / Maserati Trident Emblem
SKU:
67389900
$43.00
- Type: An authentic Maserati emblem or badge, typically featuring the iconic Trident logo.
- Function: Primarily serves as a distinctive brand identifier. These emblems are strategically placed on various parts of the vehicle (e.g., front grille, trunk lid, wheels, or interior trim) to signify its origin and premium status.
- Components: A single, molded emblem. It typically includes adhesive backing or mounting pins for secure attachment.
- Location: While the specific part number might refer to a particular location (e.g., trunk lid emblem, front grille emblem), without more specific information, it generally refers to an exterior or interior badge. Maserati vehicles often feature multiple Trident emblems.
- Material: Usually crafted from high-quality metal (chrome-plated, brushed aluminum) or durable automotive-grade plastic with a metallic finish, designed to withstand environmental exposure (UV, weather, car washes) and retain its luster.
- Design: Precisely sculpted to replicate the classic Maserati Trident logo, often with intricate details and a polished finish that reflects the brand’s heritage and luxury.
Master Superhigh Frequency Sensor
SKU:
186595
$129.00
- Type: Ultrasonic or microwave-based sensor for interior motion detection.
- Function: Part of the vehicle’s anti-theft alarm system. When the alarm is armed, this sensor emits and receives high-frequency sound waves (ultrasound) or electromagnetic waves (microwave/radar) within the vehicle’s cabin. It detects any significant changes in these waves caused by movement, such as an intruder entering the vehicle or even a window being broken.
- Detection Principle: Works on the principle of analyzing reflections of emitted waves. Any disruption to these reflections indicates movement inside the protected area, triggering the alarm.
- Coverage: Designed to cover the entire interior volume of the vehicle’s cabin.
- Location: Typically mounted in the overhead console, on the A-pillar, or in another strategic central location within the cabin to provide optimal coverage.
- Connectivity: Features an electrical connector to interface with the vehicle’s alarm control module or body control module (BCM).
- Material: Durable plastic housing designed to blend with the interior aesthetics while protecting sensitive internal electronic components.
- Sensitivity Adjustment: Some systems allow for sensitivity adjustment to prevent false alarms from environmental factors (e.g., strong vibrations, extreme temperature changes) or small animals left in the car (though not recommended for security reasons).
- Durability: Engineered for reliable long-term operation within the vehicle’s interior environment.
Number Plate Roof Lighting
SKU:
198231
$37.80
- Type: Rear License Plate Illumination Lamp Assembly.
- Function: Provides clear, white light to illuminate the vehicle’s rear license plate, ensuring it is visible and legible, especially during low-light conditions or at night.
- Light Source: Typically houses a standard incandescent bulb (e.g., C5W festoon bulb) or, in later versions, an integrated LED module.
- Housing Material: Durable, weather-resistant plastic (e.g., ABS or polycarbonate) with a clear or frosted lens.
- Sealing: Designed with integrated seals (gaskets) to prevent moisture and dirt ingress, protecting the bulb and electrical contacts.
- Mounting: Direct bolt-on or clip-in installation into the designated recess on the rear of the vehicle (trunk lid/boot or bumper).
- Connectivity: Features a dedicated electrical connector for power supply from the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant automotive lighting regulations for license plate visibility (e.g., ECE R4).
- Aesthetics: Designed to integrate discreetly and seamlessly into the rear design of Maserati vehicles.
Parking Sensor
SKU:
184929
$145.00
- Type: An ultrasonic sensor designed to detect obstacles in the vicinity of the vehicle, as part of the factory-installed parking assistance system.
- Function: This sensor emits high-frequency ultrasonic waves. When these waves encounter an obstacle, they bounce back to the sensor. The sensor then measures the time it takes for the waves to return, calculating the distance to the object. This distance information is sent to the parking assist control module, which then provides audible warnings (beeps) and sometimes visual feedback (on a display) to the driver, indicating the proximity of obstacles.
- Components: A compact, self-contained unit comprising an ultrasonic transducer (emitter/receiver), internal electronics, and an electrical connector. It is typically designed to snap or mount into a precisely sized opening in the bumper cover.
- Location: Embedded in specific locations within the front and/or rear bumper covers of the vehicle. Maserati 4200 models equipped with parking sensors will have multiple such sensors spaced across the bumpers.
- Material: Durable automotive-grade plastic housing, often unpainted or with a primer finish, allowing it to be painted to match the vehicle’s bumper color for seamless integration.
- Design: Small, round, or slightly oval-shaped, designed for flush mounting into the bumper, with weather-sealed construction to protect internal electronics from moisture and debris.
Passenger air bag – Blue “Navy”(“Navy” Blue) – 364010345
SKU:
66696715
$1,530.94
- Type: Supplemental Restraint System (SRS) Passenger’s Side Airbag Module
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
- Part Number: 364010345
- Color: Blu “Navy” (Navy Blue) to match specific Maserati interior trim codes
- Location: Integrated within the dashboard, above the glove compartment
- Deployment System: Pyrotechnic inflator, precisely controlled by the SRS control module and impact sensors
- Material: High-strength, tear-resistant coated polyamide (nylon) fabric bag concealed by a matching dashboard panel
- Safety Compliance: Engineered to meet stringent European (ECE) and relevant international automotive safety standards of its era
- Integration: Designed for seamless fit and aesthetic continuity with the Maserati 4200’s luxurious interior finishes.
Passenger air bag-grigo medio (medium grey) – 364010015
SKU:
66696716
$1,530.94
- Type: Supplemental Restraint System (SRS) Passenger’s Side Airbag Module
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
- Part Number: 364010015
- Color: Grigio Medio (Medium Grey) to perfectly match specific Maserati interior trim codes
- Location: Integrated within the dashboard, above the glove compartment
- Deployment System: Pyrotechnic inflator, precisely controlled by the SRS control module and vehicle impact sensors
- Material: High-strength, coated polyamide (nylon) fabric bag, concealed by a matching dashboard panel
- Safety Compliance: Engineered to meet stringent European (ECE) and relevant international automotive safety standards of its production era
- Integration: Designed for seamless fit and aesthetic continuity with the Maserati 4200’s luxurious interior finishes.
Passenger Airbag Deactivation Switch
SKU:
46481878
$31.13
- Type: Key-operated rotary switch
- Function: Manually enables or disables the front passenger airbag’s deployment.
- Location: Typically found on the side of the dashboard, often concealed when the passenger door is closed, or sometimes within the glove compartment.
- Indicator: Associated with a warning light on the dashboard (often an orange indicator with a graphic of a seated person with a deactivated airbag) to confirm the system’s status.
- Operation: Requires the ignition key to turn the switch to the “ON” or “OFF” position.
- Safety Interlock: Designed to only allow operation when the ignition is off, or with specific procedures to prevent accidental activation/deactivation while driving.
- Material: Durable plastic housing with internal electrical contacts and a tumbler for the key.
- Part Number: Specific to Maserati 4200 (e.g., Maserati part number 183234 or later supersessions like 46480451 for similar models, always verify with your VIN or a Maserati parts catalog for exact fitment for your 4200).
Passenger side windscreen wiper arm
SKU:
66665700
$45.76
- Type: Passenger’s side windscreen wiper arm
- Material: High-strength, corrosion-resistant metal alloy (e.g., steel or aluminum) with a durable black finish (powder-coated or painted).
- Function: Connects the wiper assembly’s pivot shaft to the wiper blade on the passenger side, facilitating the sweeping motion to clear the windscreen.
- Design: Precisely contoured and dimensioned, differing from the driver’s side arm, to match the specific geometry of the Maserati 4200’s windscreen and the wiper assembly’s synchronized sweep pattern for the passenger’s field of view.
- Attachment: Features a splined or conical mounting point for secure attachment to the wiper motor shaft (or linkage output) and a specific connector type for the wiper blade (e.g., hook, side pin, push button).
- Tension: Incorporates an internal spring mechanism to maintain consistent, optimal pressure of the wiper blade against the glass, ensuring effective and streak-free clearing.
- Durability: Engineered to endure prolonged exposure to harsh environmental factors, including UV radiation, varying temperatures, rain, snow, and road debris, without compromising integrity.
- Vehicle Specificity: Designed distinctly for either Left-Hand Drive (LHD) or Right-Hand Drive (RHD) models, given the different lengths and sweep angles required based on the vehicle’s steering configuration.
Pipe from Compressor to Filter
SKU:
66063100
$147.62
- Type: High-pressure liquid refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports high-pressure, liquid refrigerant from the outlet of the A/C condenser to the inlet of the receiver/drier (often referred to as the “filter” in this context). This is a critical step before the refrigerant proceeds to the expansion valve.
- Location: Runs from the A/C condenser (at the front of the vehicle) to the receiver/drier (typically mounted near the condenser or in the wheel well area).
- Material: Constructed primarily from rigid, high-strength aluminum alloy tubing, often with specialized flexible hose sections to accommodate routing and dampen vibrations.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, specialized couplers) at both ends, designed to maintain a leak-proof seal under high pressures.
- Durability: Engineered to withstand the significant pressures and varying temperatures encountered on the high-pressure side of the A/C system, as well as road vibrations and environmental exposure.
- Compatibility: Designed specifically for the Maserati 4200’s engine bay layout and A/C system components, ensuring correct length, bends, and fitting types.
Pipe from Union to Compressor
SKU:
67028000
$132.23
- Type: Low-pressure refrigerant line (suction line) within the Air Conditioning (A/C) system.
- Function: Transports low-pressure, gaseous refrigerant from the evaporator’s outlet (or a common “union” manifold after the evaporator/accumulator) back to the inlet side of the A/C compressor, completing the low-pressure side of the refrigeration cycle.
- Location: Runs from the area of the firewall (where the evaporator connections are) through the engine bay to the A/C compressor mounted on the engine.
- Material: Typically constructed from a combination of flexible, high-pressure synthetic rubber hose and rigid aluminum alloy tubing, designed for durability and vibration dampening.
- Connections: Features specific, sealed fittings (e.g., O-ring connections, specialized quick-connects) at both ends to ensure a leak-proof seal under the system’s low operating pressures.
- Insulation: Often includes external insulation (e.g., foam sleeve) to prevent heat absorption from the engine bay into the cold, low-pressure refrigerant, which improves A/C efficiency.
- Durability: Engineered to withstand continuous exposure to engine heat, vibrations, and the specific pressures of the A/C system.
- Compatibility: Designed precisely for the Maserati 4200’s engine bay layout and A/C system components, ensuring correct length, routing, and fitting types.
Pipe fron Filter to Union
SKU:
66063200
$91.66
- Type: High-pressure liquid refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports purified, high-pressure, liquid refrigerant from the outlet of the receiver/drier (the “filter”) directly to the inlet of the expansion valve (the “union”). This is the final high-pressure line before the refrigerant enters the cabin’s evaporator.
- Location: Typically runs from the receiver/drier (often mounted near the condenser or wheel well) towards the firewall where the expansion valve is usually located.
- Material: Primarily constructed from rigid, durable aluminum alloy tubing, often incorporating flexible, high-pressure reinforced synthetic rubber hose sections to manage routing and absorb vibrations.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, specialized couplers) at both ends, engineered to maintain a leak-proof seal under the continuous high pressures of the liquid line.
- Durability: Designed to withstand the high pressures (typically 150-300 psi or 10-20 bar), varying temperatures, and engine vibrations inherent in the A/C system.
- Compatibility: Precisely manufactured to fit the specific routing, lengths, and fitting types required by the Maserati 4200’s A/C system and engine bay layout.
Pipe fron Union to Evaporator
SKU:
66244200
$110.23
- Type: Refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports low-pressure, atomized (partially vaporized) liquid refrigerant from the expansion valve (union point) to the evaporator coil located inside the vehicle’s cabin. This is typically the “cold side” return line.
- Location: Connects the engine bay side of the A/C system (often where the expansion valve is located on the firewall) to the evaporator core within the dashboard/HVAC unit.
- Material: Constructed from durable, corrosion-resistant aluminum alloy tubing, often combined with flexible rubber or composite hoses at connection points for vibration dampening and routing flexibility.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, flared fittings) at both ends to ensure a leak-proof seal under varying pressure and temperature conditions.
- Insulation: May include external insulation (e.g., foam sleeve) to prevent heat absorption from the engine bay into the cold refrigerant line, improving A/C efficiency.
- Durability: Engineered to withstand the high and low pressures of the A/C system, constant temperature fluctuations, and engine vibrations.
- Compatibility: Designed specifically for the Maserati 4200’s chassis and A/C system, ensuring correct length, bends, and fitting types.
Plug
SKU:
67233800
$70.00
- Type: Multi-pin electrical connector (e.g., 2-pin, 4-pin, etc.)
- Design: Often features a secure locking mechanism (e.g., locking tabs, slide locks) to prevent accidental disconnection.
- Color Coding: Typically features bright yellow or orange housing, which is a universal industry standard for SRS (Supplemental Restraint System) wiring, indicating high-voltage or critical safety circuits.
- Material: Durable, high-quality plastic housing with precise metal terminals.
- Protection: Often sealed or semi-sealed to protect against moisture and dust.
- Application Specificity: Each connector is uniquely designed for its specific component (e.g., airbag inflator, sensor, SRS module), preventing incorrect connections.
- Conductivity: Designed for low resistance to ensure reliable signal and power transmission.
Pollen Filter
SKU:
382400304
$49.33
- Type: Air filtration element for the vehicle’s heating, ventilation, and air conditioning (HVAC) system.
- Function: Filters incoming air before it enters the passenger cabin, removing airborne contaminants such as dust, pollen, mold spores, soot, exhaust fumes, and other particulate matter. Carbon-activated versions also filter odors.
- Location: Typically located in the passenger footwell, often accessible from underneath the glove box.
- Material: Usually made from a pleated paper-like material, synthetic fibers, or a combination of these. Many modern replacements, including some for this part number, are activated carbon filters for enhanced odor absorption.
- Design: Rectangular shape with a specific size and airflow direction marked to ensure correct installation.
- Maintenance Interval: Recommended replacement typically every 15,000 to 30,000 miles or annually, depending on driving conditions and environment. In dusty or polluted areas like Douala, more frequent replacement may be necessary.
- Compatibility: Designed for precise fitment into the Maserati 3200 and 4200 HVAC housing.
Pressostat
SKU:
46476438
$83.88
- Type: Electrical pressure-sensitive switch or sensor.
- Function: Monitors the refrigerant pressure within the A/C system (typically on the high-pressure side, but some are dual-function for both high and low pressure). It sends electrical signals to the Engine Control Unit (ECU) or A/C control module.
- Safety Role: Acts as a crucial safety device, preventing the A/C compressor from operating if refrigerant pressure is either too low (indicating a leak and risk of compressor damage due to lack of lubrication) or too high (indicating a blockage or overcharge, which could lead to system damage or even rupture).
- Compressor Control: Helps regulate the A/C compressor’s engagement and disengagement based on pressure thresholds, ensuring optimal system performance and protection.
- Fan Control: In some systems, it can also send signals to control the radiator/condenser cooling fans, activating higher speeds when refrigerant pressure rises.
- Connectivity: Features specific electrical pins (often 3 or 5 pins) for power, ground, and signal output, connecting to the vehicle’s wiring harness.
- Thread Size: Commonly has a specific thread size (e.g., 7/16 UNF or similar) for sealing into the A/C line.
- Refrigerant Compatibility: Designed for R134a refrigerant, standard for vehicles of this era.
- Material: Durable metal body (brass or aluminum) with a sealed electrical connector and robust internal pressure-sensing diaphragm/sensor.
Radiator Grille Assembly
SKU:
67811300
$827.00
- Type: A complete assembly for the prominent front grille of the Maserati 4200, which is a key aesthetic and functional element of the vehicle’s front fascia.
- Function: The primary functions of the radiator grille assembly include:
- Engine Cooling: Allows essential airflow into the engine bay to cool the radiator, condenser (for AC), and other heat exchangers, preventing engine overheating.
- Aesthetics: Serves as a defining design feature of the Maserati 4200, contributing significantly to its distinctive, aggressive, and elegant appearance. It typically houses the iconic Maserati Trident emblem.
- Protection: Shields the delicate radiator fins and other front-mounted components from larger road debris (e.g., stones, leaves, small animals) while still allowing air passage.
- Component Integration: Provides the mounting point for the Maserati emblem and sometimes for other elements like parking sensors or specific trim pieces.
- Components: A “complete” radiator grille assembly (Part Number 67811300) typically includes:
- The main grille frame (outer surround).
- The grille mesh or slats (inner pattern).
- Mounting tabs or points for attachment to the front bumper and/or vehicle body.
- May or may not include the Maserati Trident emblem, which is often sold separately, though sometimes integrated.
- Location: Centrally located at the very front of the vehicle, within the opening of the front bumper.
- Material: Often constructed from durable automotive-grade plastics (ABS, polypropylene) with various finishes (e.g., chrome plating, matte black, gloss black), or in some high-end or specialized versions, lightweight metals (aluminum). Designed to withstand environmental exposure and minor impacts.
- Design: Precisely contoured and styled to match the specific design language of the Maserati 4200, ensuring seamless integration with the front bumper, headlights, and hood.
Red Valet Key One Button
SKU:
980001802
$213.00
- Type: Integrated remote key fob, combining a physical ignition key blade with a simplified remote control.
- Color: Distinctive red casing, often used by manufacturers to denote a valet or limited-access key.
- Buttons: Typically features a single button for remote lock/unlock functionality, or sometimes just a lock function, depending on the precise design and intended limitation.
- Internal Components: Contains a transponder chip (for immobilizer function) and a basic remote control circuit board powered by a small battery.
- Key Blade: Includes an un-cut or pre-cut metal key blade that mechanically operates the ignition and door locks.
- Security Features: The integrated transponder chip is crucial for the vehicle’s immobilizer system, allowing the engine to start only when an authorized key is detected.
- Valet-Specific Limitations: Designed to offer limited access or functionality. While it can start the car, it typically cannot unlock the trunk/boot or glovebox, or it may disable certain infotainment features when in use, protecting personal belongings and settings when the car is handed over for valet service.
- Material: Durable molded plastic casing.
- Programming: Requires specialized programming by a Maserati dealership or a qualified automotive locksmith to synchronize the remote functions with the vehicle’s Body Control Module (BCM) and to code the transponder chip to the Immobilizer ECU for engine starting.
Relay Complete Cable
SKU:
980138211
$687.37
- Type: Pre-assembled electrical wiring harness or pigtail, typically including a connector for a relay and the associated wiring for a specific electrical circuit. It may or may not include the relay itself.
- Function: Facilitates the correct electrical connection for a specific relay to power and control a high-current component or system within the vehicle. Relays are used to allow a low-current control signal (from a switch or ECU) to switch a much higher current to a load (e.g., fuel pump, cooling fan, starter motor, F1 pump, lights). This “complete cable” ensures proper current flow and protection for that specific circuit.
- Location: The exact location depends on the specific function it serves. It could be in the engine bay, near a fuse box, or closer to the component it powers.
- Components: Consists of insulated copper wires, a specific multi-pin connector for a relay, and potentially other terminals or connectors for connecting to the power source and the electrical load. The gauge of the wires is suited for the intended current.
- Material: High-quality automotive-grade copper wire with durable, heat-resistant, and flexible insulation. Connectors are typically robust plastic with corrosion-resistant metal terminals.
- Durability: Engineered to withstand the harsh automotive environment, including vibrations, temperature fluctuations, and potential exposure to moisture or chemicals, specific to its installed location.
- Compatibility: Designed for precise fitment and electrical compatibility with the Maserati 4200’s electrical system, ensuring correct voltage, current carrying capacity, and signal integrity for the intended function.