Pipe fron Union to Evaporator
SKU:
66244200
$110.23
- Type: Refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports low-pressure, atomized (partially vaporized) liquid refrigerant from the expansion valve (union point) to the evaporator coil located inside the vehicle’s cabin. This is typically the “cold side” return line.
- Location: Connects the engine bay side of the A/C system (often where the expansion valve is located on the firewall) to the evaporator core within the dashboard/HVAC unit.
- Material: Constructed from durable, corrosion-resistant aluminum alloy tubing, often combined with flexible rubber or composite hoses at connection points for vibration dampening and routing flexibility.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, flared fittings) at both ends to ensure a leak-proof seal under varying pressure and temperature conditions.
- Insulation: May include external insulation (e.g., foam sleeve) to prevent heat absorption from the engine bay into the cold refrigerant line, improving A/C efficiency.
- Durability: Engineered to withstand the high and low pressures of the A/C system, constant temperature fluctuations, and engine vibrations.
- Compatibility: Designed specifically for the Maserati 4200’s chassis and A/C system, ensuring correct length, bends, and fitting types.
Plug
SKU:
67233800
$70.00
- Type: Multi-pin electrical connector (e.g., 2-pin, 4-pin, etc.)
- Design: Often features a secure locking mechanism (e.g., locking tabs, slide locks) to prevent accidental disconnection.
- Color Coding: Typically features bright yellow or orange housing, which is a universal industry standard for SRS (Supplemental Restraint System) wiring, indicating high-voltage or critical safety circuits.
- Material: Durable, high-quality plastic housing with precise metal terminals.
- Protection: Often sealed or semi-sealed to protect against moisture and dust.
- Application Specificity: Each connector is uniquely designed for its specific component (e.g., airbag inflator, sensor, SRS module), preventing incorrect connections.
- Conductivity: Designed for low resistance to ensure reliable signal and power transmission.
Pollen Filter
SKU:
382400304
$49.33
- Type: Air filtration element for the vehicle’s heating, ventilation, and air conditioning (HVAC) system.
- Function: Filters incoming air before it enters the passenger cabin, removing airborne contaminants such as dust, pollen, mold spores, soot, exhaust fumes, and other particulate matter. Carbon-activated versions also filter odors.
- Location: Typically located in the passenger footwell, often accessible from underneath the glove box.
- Material: Usually made from a pleated paper-like material, synthetic fibers, or a combination of these. Many modern replacements, including some for this part number, are activated carbon filters for enhanced odor absorption.
- Design: Rectangular shape with a specific size and airflow direction marked to ensure correct installation.
- Maintenance Interval: Recommended replacement typically every 15,000 to 30,000 miles or annually, depending on driving conditions and environment. In dusty or polluted areas like Douala, more frequent replacement may be necessary.
- Compatibility: Designed for precise fitment into the Maserati 3200 and 4200 HVAC housing.
Pressostat
SKU:
46476438
$83.88
- Type: Electrical pressure-sensitive switch or sensor.
- Function: Monitors the refrigerant pressure within the A/C system (typically on the high-pressure side, but some are dual-function for both high and low pressure). It sends electrical signals to the Engine Control Unit (ECU) or A/C control module.
- Safety Role: Acts as a crucial safety device, preventing the A/C compressor from operating if refrigerant pressure is either too low (indicating a leak and risk of compressor damage due to lack of lubrication) or too high (indicating a blockage or overcharge, which could lead to system damage or even rupture).
- Compressor Control: Helps regulate the A/C compressor’s engagement and disengagement based on pressure thresholds, ensuring optimal system performance and protection.
- Fan Control: In some systems, it can also send signals to control the radiator/condenser cooling fans, activating higher speeds when refrigerant pressure rises.
- Connectivity: Features specific electrical pins (often 3 or 5 pins) for power, ground, and signal output, connecting to the vehicle’s wiring harness.
- Thread Size: Commonly has a specific thread size (e.g., 7/16 UNF or similar) for sealing into the A/C line.
- Refrigerant Compatibility: Designed for R134a refrigerant, standard for vehicles of this era.
- Material: Durable metal body (brass or aluminum) with a sealed electrical connector and robust internal pressure-sensing diaphragm/sensor.
Radiator Grille Assembly
SKU:
67811300
$827.00
- Type: A complete assembly for the prominent front grille of the Maserati 4200, which is a key aesthetic and functional element of the vehicle’s front fascia.
- Function: The primary functions of the radiator grille assembly include:
- Engine Cooling: Allows essential airflow into the engine bay to cool the radiator, condenser (for AC), and other heat exchangers, preventing engine overheating.
- Aesthetics: Serves as a defining design feature of the Maserati 4200, contributing significantly to its distinctive, aggressive, and elegant appearance. It typically houses the iconic Maserati Trident emblem.
- Protection: Shields the delicate radiator fins and other front-mounted components from larger road debris (e.g., stones, leaves, small animals) while still allowing air passage.
- Component Integration: Provides the mounting point for the Maserati emblem and sometimes for other elements like parking sensors or specific trim pieces.
- Components: A “complete” radiator grille assembly (Part Number 67811300) typically includes:
- The main grille frame (outer surround).
- The grille mesh or slats (inner pattern).
- Mounting tabs or points for attachment to the front bumper and/or vehicle body.
- May or may not include the Maserati Trident emblem, which is often sold separately, though sometimes integrated.
- Location: Centrally located at the very front of the vehicle, within the opening of the front bumper.
- Material: Often constructed from durable automotive-grade plastics (ABS, polypropylene) with various finishes (e.g., chrome plating, matte black, gloss black), or in some high-end or specialized versions, lightweight metals (aluminum). Designed to withstand environmental exposure and minor impacts.
- Design: Precisely contoured and styled to match the specific design language of the Maserati 4200, ensuring seamless integration with the front bumper, headlights, and hood.
Red Valet Key One Button
SKU:
980001802
$213.00
- Type: Integrated remote key fob, combining a physical ignition key blade with a simplified remote control.
- Color: Distinctive red casing, often used by manufacturers to denote a valet or limited-access key.
- Buttons: Typically features a single button for remote lock/unlock functionality, or sometimes just a lock function, depending on the precise design and intended limitation.
- Internal Components: Contains a transponder chip (for immobilizer function) and a basic remote control circuit board powered by a small battery.
- Key Blade: Includes an un-cut or pre-cut metal key blade that mechanically operates the ignition and door locks.
- Security Features: The integrated transponder chip is crucial for the vehicle’s immobilizer system, allowing the engine to start only when an authorized key is detected.
- Valet-Specific Limitations: Designed to offer limited access or functionality. While it can start the car, it typically cannot unlock the trunk/boot or glovebox, or it may disable certain infotainment features when in use, protecting personal belongings and settings when the car is handed over for valet service.
- Material: Durable molded plastic casing.
- Programming: Requires specialized programming by a Maserati dealership or a qualified automotive locksmith to synchronize the remote functions with the vehicle’s Body Control Module (BCM) and to code the transponder chip to the Immobilizer ECU for engine starting.
Relay Complete Cable
SKU:
980138211
$687.37
- Type: Pre-assembled electrical wiring harness or pigtail, typically including a connector for a relay and the associated wiring for a specific electrical circuit. It may or may not include the relay itself.
- Function: Facilitates the correct electrical connection for a specific relay to power and control a high-current component or system within the vehicle. Relays are used to allow a low-current control signal (from a switch or ECU) to switch a much higher current to a load (e.g., fuel pump, cooling fan, starter motor, F1 pump, lights). This “complete cable” ensures proper current flow and protection for that specific circuit.
- Location: The exact location depends on the specific function it serves. It could be in the engine bay, near a fuse box, or closer to the component it powers.
- Components: Consists of insulated copper wires, a specific multi-pin connector for a relay, and potentially other terminals or connectors for connecting to the power source and the electrical load. The gauge of the wires is suited for the intended current.
- Material: High-quality automotive-grade copper wire with durable, heat-resistant, and flexible insulation. Connectors are typically robust plastic with corrosion-resistant metal terminals.
- Durability: Engineered to withstand the harsh automotive environment, including vibrations, temperature fluctuations, and potential exposure to moisture or chemicals, specific to its installed location.
- Compatibility: Designed for precise fitment and electrical compatibility with the Maserati 4200’s electrical system, ensuring correct voltage, current carrying capacity, and signal integrity for the intended function.
Resistor
SKU:
183276
$81.00
- Type: An electrical resistor component, most commonly identified as a blower motor resistor for the vehicle’s heating, ventilation, and air conditioning (HVAC) system.
- Function: In its common application as a blower motor resistor, it controls the speed of the HVAC blower fan. It does this by creating resistance in the electrical circuit, which in turn reduces the voltage supplied to the blower motor. Different resistance values correspond to different fan speeds (e.g., low, medium, high). If used in another circuit, its function would be to limit current flow or drop voltage as required by that specific circuit.
- Components: Typically consists of one or more resistive elements (often coiled wires or ceramic resistors) mounted on a heat sink to dissipate heat generated by the resistance. It will have an electrical connector for integration into the vehicle’s wiring harness.
- Location: If it’s a blower motor resistor, it is usually located within the HVAC housing, often accessible from under the dashboard, near the blower motor itself. This placement allows it to utilize the airflow from the blower fan to help dissipate heat. For other applications, its location would vary depending on the circuit it serves.
- Material: Resistive elements are usually made of alloys like nichrome. The base is often ceramic or metal (for heat dissipation), encased in a durable plastic or metal housing with electrical terminals.
- Design: Engineered to provide specific resistance values required for its intended electrical circuit and to withstand the electrical current and heat generated during operation.
RH Bracket
SKU:
66379200
$33.00
- Type: Right-Hand (RH) side structural support bracket for the headlight assembly.
- Function: Provides precise and secure mounting points for the headlight unit, ensuring correct alignment, stability, and vibration dampening. It integrates the headlight assembly securely into the vehicle’s front body structure.
- Location: Situated within the front fascia/fender area on the right side of the vehicle, behind the headlight opening.
- Material: Typically robust stamped steel or lightweight, high-strength aluminum alloy, often coated or painted for corrosion resistance.
- Design: Precision-engineered to match the specific contours of the Maserati 4200’s chassis and headlight assembly (especially relevant for Xenon variants which might have different weight/mounting points). Features pre-drilled holes and threaded inserts for accurate bolt-on installation.
- Durability: Built to withstand constant vibrations, minor impacts, and environmental exposure without deforming or compromising headlight stability.
- Vehicle Specificity: Designed exclusively for the Maserati 4200 platform, ensuring exact fitment and structural integrity.
RH HeadLight
SKU:
980000928
$359.75
- Type: Complete Right-Hand (RH) Headlight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Lighting Technology: Typically Halogen-based for main low and high beams. Includes integrated turn signal, parking light, and potentially side marker functions.
- Lens Material: Durable, high-clarity polycarbonate or glass, often treated with a UV-protective coating to resist yellowing, hazing, and cracking over time.
- Housing Material: Robust, heat-resistant, and impact-resistant plastic (e.g., polypropylene) forming the main body of the assembly, designed to protect internal components and dissipate heat.
- Reflectors/Projectors: Precisely engineered internal reflectors to optimally direct the light beam for maximum illumination and minimal glare, or a projector lens system (depending on design variant).
- Mounting: Designed for direct, bolt-on replacement, ensuring perfect fitment and alignment with the Maserati 4200’s front fascia and existing chassis mounting points.
- Connectivity: Features integrated electrical connectors for plug-and-play installation, connecting seamlessly with the vehicle’s electrical harness.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) for light output, pattern, and safety.
- Aesthetics: Matches the original factory design and finish of the Maserati 4200, preserving the vehicle’s distinctive and elegant front-end appearance.
RH HeadLight
SKU:
190712050
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Primarily utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Depending on the original vehicle specification, it may accommodate Xenon (HID) bulbs and ballasts.
- Lens Material: High-grade, UV-stabilized polycarbonate or glass for superior clarity and resistance to hazing or yellowing over time.
- Housing Material: Durable, heat-resistant, and impact-resistant plastic (e.g., polypropylene) designed to protect internal components and dissipate heat effectively.
- Mounting: Engineered for a direct bolt-on replacement, ensuring precise alignment and fitment with existing factory mounting points on the Maserati 4200’s chassis.
- Connectivity: Equipped with integrated electrical connectors for seamless plug-and-play connection to the vehicle’s wiring harness.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) for optimal light distribution and safety.
- Aesthetics: Designed to perfectly complement the iconic front fascia of the Maserati 4200, preserving its original luxurious and sporty appearance.
RH HeadLight – Giallo GranTurismo
SKU:
190712046
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Typically utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Some models may have Xenon (HID) options depending on original specification.
- Lens Material: High-clarity polycarbonate or glass, UV-treated for resistance against yellowing and hazing.
- Housing Material: Durable, heat-resistant plastic (e.g., polypropylene), designed for optimal heat dissipation and protection of internal components.
- Mounting: Direct bolt-on replacement, matching original factory mounting points for precise fitment and alignment.
- Connectivity: Features integrated electrical connectors for plug-and-play installation with the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets).
- Aesthetics: Designed to seamlessly integrate with the Maserati 4200’s distinct front fascia, maintaining its iconic styling.
RH Longitudinal Harness
SKU:
200678
$672.00
- Type: A major, extensive electrical wiring loom that runs along the right-hand (passenger) side of the vehicle’s underbody or chassis.
- Function: This harness acts as a crucial electrical distribution pathway, carrying power, ground, and data signals to various components located along the right longitudinal section of the Maserati. It connects elements from the front of the vehicle to the rear, serving a multitude of systems including:
- Fuel System: Potentially fuel pump power, fuel level sender, and EVAP system components.
- Rear Lighting: Taillights, brake lights, turn signals, reverse lights on the right side.
- Rear Sensors: Parking sensors, wheel speed sensors (ABS/ESP) for the right rear wheel, suspension sensors.
- Exhaust System Sensors: Oxygen sensors (post-catalytic converter) or temperature sensors.
- Body Control Modules/Relay Boxes: Connecting to any localized control units or relay boxes in the rear or side sections.
- Other Ancillary Systems: Various modules or actuators positioned along the right side of the undercarriage or within the rear quarter panel.
- Complexity: A highly complex and lengthy harness with numerous branches, multi-pin connectors, various wire gauges, and often protective sheathing, designed to withstand external environmental factors.
- Location: Primarily routed along the vehicle’s right-hand chassis rail, underbody, or within the right rear quarter panel, connecting to the main body harness in the cabin or engine bay.
- Material: High-quality, automotive-grade copper wire with robust, weather-resistant, and abrasion-resistant insulation. Connectors are typically sealed and designed to prevent moisture and dirt ingress, crucial for underbody exposure.
- Design: Precisely engineered for routing along the vehicle’s frame, with specific lengths and connector orientations for each component, ensuring secure mounting and protection from road debris, moisture, heat, and vibration.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 chassis and components on the right-hand side. It is distinct from the left-hand longitudinal harness.
RH Rear TailLight
SKU:
195847
$282.85
- Type: Complete Right-Hand (RH) Rear Taillight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Function: Integrates multiple lighting functions including:
- Brake Light: Red, illuminates brightly when brakes are applied.
- Running/Tail Light: Red, continuous illumination for rear visibility.
- Turn Signal/Indicator: Amber, flashing light for signaling turns or lane changes.
- Reverse/Backup Light: White, illuminates when reverse gear is engaged.
- Rear Fog Light (if applicable): Red, typically brighter than running lights, for low visibility.
- Light Source: Primarily uses incandescent bulbs for various functions, though some aftermarket or specific market variants might incorporate LEDs.
- Lens Material: Durable, high-quality, impact-resistant polycarbonate or acrylic plastic, designed for optimal light transmission and color integrity.
- Housing Material: Robust, sealed plastic housing that protects internal wiring, bulb sockets, and reflectors from moisture, dust, and vibration.
- Mounting: Designed for direct, bolt-on replacement, ensuring precise fitment and alignment with the Maserati 4200’s rear bodywork.
- Connectivity: Features a dedicated multi-pin electrical connector for plug-and-play integration with the vehicle’s rear wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE R7, R6, R23, R38) for light output, color, and pattern.
- Aesthetics: Matches the original factory design, contributing significantly to the Maserati 4200’s distinctive and elegant rear styling.
Ring Nut
SKU:
187677
$38.00
- Type: A specialized threaded fastener, typically a large, high-strength nut with specific features (e.g., castellated design, locking mechanism, or specific shape for a key/tool) used to secure a component, most commonly identified as the retaining nut for the front wheel bearing or hub assembly.
- Function: Its primary purpose is to precisely tighten and secure the front wheel bearing onto the spindle or hub, setting the correct preload and preventing lateral movement of the wheel. This is critical for:
- Wheel Security: Keeping the wheel securely attached to the vehicle.
- Bearing Longevity: Ensuring proper bearing preload for optimal lifespan and smooth operation.
- Safe Handling: Maintaining wheel alignment and preventing excessive play that could compromise steering and stability.
- Components: A single, robust, precisely machined metal nut, with internal threading. It may include features for a specific tightening tool (e.g., a spanner wrench or a large socket with specific lugs) and a locking mechanism (e.g., a cotter pin and castle nut design, or a self-locking thread).
- Location: Located on the front axle, at the end of the spindle or hub assembly, holding the front wheel bearing/hub unit in place. It is typically covered by the dust cap or center cap of the wheel.
- Material: High-grade, heat-treated steel, often with a protective coating (e.g., zinc plating) to resist corrosion and provide the necessary strength for high torque applications.
- Design: Precision-engineered with specific threading (e.g., fine thread) and dimensions to achieve the exact torque and preload required for the Maserati 4200’s front wheel bearings, which are subject to significant forces during driving.
Roof External Trim
SKU:
382500465
$1,861.00
- Type: An exterior trim piece designed to be installed along the edge of the vehicle’s roof, typically where the roof panel meets the side body (A-pillar to C-pillar) or around the top edge of the windshield/rear window. It’s often referred to as a roof molding or drip rail trim.
- Function: The primary functions of this roof external trim include:
- Aesthetics: Provides a clean, finished appearance to the transition between the roof panel and the rest of the bodywork, enhancing the vehicle’s design lines.
- Weather Sealing/Water Management: While not the primary seal for the windows, it often helps to channel water away from the side windows and door openings, contributing to the overall weather sealing of the cabin.
- Concealment: Covers seams, welds, or mounting hardware where the roof panel is attached to the body structure.
- Components: Typically a single, pre-formed piece of trim for a specific side or section of the roof. It is usually made from a flexible, yet durable, material designed to conform to the roof’s contours. It comes as a bare trim piece, ready for installation.
- Location: Runs along the outer edge of the roof, often from the base of the A-pillar to the C-pillar/rear window on coupes, or along the top edge of the windscreen for convertibles.
- Material: Commonly made from rubber, flexible plastic (PVC), or a combination of materials with a metal core for rigidity, often with an external finish (e.g., matte black, gloss black, chrome-effect, or body-color matched) designed to resist UV degradation and environmental exposure.
- Design: Precisely contoured to follow the specific lines of the Maserati 3200 GT and 4200 GT roofs, ensuring a snug fit and seamless integration with the vehicle’s exterior.
Shock Absorber ECU
SKU:
206233
$1,242.00
- Type: A dedicated Electronic Control Unit (ECU) designed to manage the vehicle’s active or adaptive damping system, known as Skyhook in Maserati terminology.
- Function: This ECU is the “brain” of the Skyhook adaptive suspension. It continuously monitors data from various sensors, including:
- Vertical Acceleration Sensors: Measuring body movement and road surface irregularities.
- Wheel Speed Sensors: Providing data on vehicle speed.
- Steering Wheel Angle Sensor: Indicating driver input.
- Brake Pressure Sensor: Indicating braking force. Based on this real-time data, the Shock Absorber ECU instantly calculates the optimal damping force required for each individual shock absorber. It then sends precise commands to the electrically controlled valves within the Skyhook dampers, allowing them to continuously adjust their stiffness in milliseconds. This dynamic control optimizes the balance between ride comfort and handling performance, adapting to varying road conditions and driving styles.
- Components: A self-contained electronic module containing a high-speed microprocessor, memory (for control algorithms and learned parameters), and various input/output circuits for sensor signals and actuator control (to the Skyhook dampers). Encased in a durable housing with a multi-pin electrical connector.
- Location: Typically found within the vehicle’s cabin, often under a seat, in the center console, or mounted to the floor pan. This location helps protect it from the harsher elements of the engine bay or undercarriage.
- Material: Robust metal or high-grade plastic casing housing sensitive internal electronics, designed to withstand typical automotive operating conditions.
- Design: Engineered for rapid data processing and real-time control, crucial for the continuous and precise adjustments required by an adaptive suspension system.
- Compatibility: Essential for the proper functioning of the Skyhook adaptive suspension system in the Maserati 4200. Not applicable to vehicles without this specific option. This particular part number may correspond to a specific software revision or model year range.
Side Crash Sensor
SKU:
189062
$87.27
Product Name: Side Crash Sensor
Application: Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
Product Specifications:
- Type: Piezoelectric or Accelerometer-based Impact Sensor
- Function: Detects sudden lateral (side) deceleration or pressure changes indicative of a side impact collision.
- Location: Typically mounted within the vehicle’s side structure, often inside the door panels, B-pillars, or under the seats, strategically placed to detect forces unique to side impacts.
- Signal Output: Sends a precise electrical signal to the Airbag System Control Module (SRS ECU) upon detecting a collision exceeding a calibrated threshold.
- Sensitivity: Calibrated specifically for the Maserati 4200’s chassis characteristics and desired side airbag deployment thresholds.
- Material: Robust, sealed housing designed to withstand environmental factors and minor impacts without false triggers.
- Connectivity: Features a dedicated electrical connector (often yellow/orange-coded) for secure and reliable signal transmission.
- Part Number: Specific to Maserati (e.g., Maserati part number 189062 for Coupé models, 184993 for Spyder models, though always verify with VIN).
Side Marker Cable
SKU:
186674
$28.00
- Type: A dedicated, relatively short electrical wiring harness specifically for a side marker lamp assembly.
- Function: This harness provides the electrical connection for a single side marker lamp. It supplies power and ground to the bulb or LED element within the marker, allowing it to illuminate and contribute to the vehicle’s side visibility, especially during nighttime driving or in low-light conditions. These lights help other drivers perceive the length and position of the vehicle.
- Components: Typically consists of a short length of wire with a connector on one end (to plug into the main vehicle wiring harness) and a bulb socket or direct connector for the side marker lamp on the other end.
- Location: Installed within the vehicle’s fender, bumper, or quarter panel where the side marker lamp is mounted, connecting it to a nearby branch of the main body wiring harness.
- Material: Automotive-grade copper wire with durable, weather-resistant insulation. Connectors are designed to be relatively robust and may include seals to protect against moisture and dirt.
- Design: Simple and compact, designed for direct plug-and-play connection to the side marker lamp and the existing vehicle wiring.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200’s side marker lamp assemblies.
Side Mirror Switch
SKU:
383300136
$123.48
- Type: Multi-directional electrical switch with selector functions.
- Function: Allows the driver to electrically adjust the position of the left (LH) and right (RH) exterior side mirrors. It typically includes:
- A selector to choose which mirror (LH or RH) is being adjusted.
- A joystick, rocker, or directional pad for up/down/left/right mirror movement.
- May also include a mirror folding function (if equipped on the vehicle).
- Location: Commonly found on the driver’s side door panel or dashboard, within easy reach of the driver.
- Material: Durable automotive-grade plastic for the housing and button/joystick, with internal electrical contacts and circuit board. Often features illuminated symbols.
- Connectivity: Features a multi-pin electrical connector on the rear to interface with the vehicle’s wiring harness and mirror motors.
- Design: Ergonomically shaped for intuitive operation, seamlessly integrating into the Maserati’s interior design.
- Durability: Designed for repeated use, but susceptible to wear, electrical contact degradation, or sticky/fading surface issues over time.
Slave SuperHigh Frequency Sensor
SKU:
186596
$153.00
- Type: Auxiliary ultrasonic or microwave-based sensor for interior motion detection.
- Function: Works in conjunction with the “Master Superhigh Frequency Sensor” (P/N 186595) to provide enhanced or more comprehensive interior volumetric coverage for the vehicle’s anti-theft alarm system. It detects movement within its specific zone of the cabin (e.g., rear cabin area in a Coupe, or potentially both front and rear in a Spyder/Convertible) when the alarm is armed.
- Detection Principle: Similar to the master sensor, it emits and receives high-frequency sound waves (ultrasound) or electromagnetic waves (microwave/radar) and detects disruptions caused by movement within its detection field.
- Coverage Enhancement: Expands the detection capability of the alarm system to areas that might be partially obscured or less effectively covered by a single master sensor, ensuring no blind spots for intrusion detection.
- Location: Typically mounted in a secondary strategic location within the cabin, such as the rear parcel shelf, a rear pillar, or in a convertible, designed to cover the specific open-air cabin volume.
- Connectivity: Features an electrical connector to interface with the main alarm control module or directly with the master sensor, which then communicates with the main control unit.
- Material: Durable plastic housing designed to integrate discreetly into the interior, protecting sensitive internal electronic components.
- Durability: Engineered for reliable long-term operation within the vehicle’s interior environment.
- Compatibility: Specifically calibrated and designed to complement the master sensor and the overall alarm system of the Maserati 4200.
SoundProofing Kit
SKU:
1001961
$947.00
- Type: A collection of specialized materials designed to reduce noise, vibration, and harshness (NVH) within the vehicle’s cabin. This kit is composed of various acoustic damping and insulation components.
- Function: The primary purpose of a soundproofing kit is to:
- Reduce Road Noise: Minimize noise generated by tire-to-road contact, road imperfections, and general ambient road noise.
- Dampen Vibrations: Absorb structural vibrations from the chassis, engine, and drivetrain, preventing them from resonating within the cabin.
- Insulate Against Engine/Exhaust Noise: Limit the intrusion of engine and exhaust sound into the passenger compartment, while still allowing the desired Maserati engine note to be appreciated.
- Thermal Insulation: Provide a degree of thermal insulation, helping to maintain stable cabin temperatures.
- Improve Audio Quality: By reducing external noise and internal resonance, the kit can enhance the clarity and impact of the in-car audio system.
- Components: Typically comprises various types of materials, precisely cut and shaped for specific areas of the vehicle. This may include:
- Heavy Bituminous Mats: Dense, self-adhesive sheets for vibrational damping on large metal panels (floor, doors, trunk).
- Foam/Felt Layers: Sound-absorbing foam or fibrous felt materials for acoustic insulation against airborne noise.
- Mass Loaded Vinyl (MLV): Heavy, flexible barriers for blocking sound transmission.
- Specific Molded Pieces: Shaped components for precise fitment in complex areas like the firewall, transmission tunnel, or wheel wells.
- Location: Designed for strategic placement throughout the vehicle’s body structure, including under carpets (floor pan), inside door panels, beneath the rear seats, within the trunk, and possibly in the firewall area.
- Material: A combination of automotive-grade, fire-retardant, and durable acoustic materials engineered for long-term performance in a vehicle environment.
- Design: Each piece in the kit is custom-cut and contoured to fit the specific body panels and cavities of the Maserati 4200, ensuring maximum coverage and effectiveness.
Spoyler
SKU:
980001048
$284.00
- Type: An aerodynamic appendage designed to be mounted on the rear trunk lid of the Maserati 4200 GT. This is typically a subtle, lip-style spoiler, often factory-installed on GranSport models or offered as an option on other variants.
- Function: The primary functions of this spoiler include:
- Aesthetics: Significantly enhances the vehicle’s sporty and aggressive appearance, providing a more defined rear profile. It’s a key visual differentiator for performance variants.
- Aerodynamic Enhancement: While typically subtle for street cars, it can generate a small amount of downforce at higher speeds, contributing to improved rear-end stability and grip, particularly important for a high-performance vehicle. It helps to manage airflow over the rear of the vehicle, reducing lift.
- Components: A single, pre-formed piece. It typically has integrated mounting points or relies on strong automotive-grade adhesive for attachment to the trunk lid. It is usually supplied unpainted, requiring prep work and painting to match the vehicle’s body color.
- Location: Mounted directly onto the upper surface of the rear trunk lid.
- Material: Commonly made from durable, lightweight materials such as ABS plastic, fiberglass, or in some cases, carbon fiber (especially for performance trims or aftermarket options). It’s designed to withstand aerodynamic forces, UV exposure, and weather conditions.
- Design: Precisely contoured to flow seamlessly with the lines of the Maserati 4200’s trunk lid and rear bodywork, ensuring an OEM-quality fit and finish.
Tele-Controller Sheets Kit
SKU:
980001809
$52.00
- Type: An electronic kit containing components primarily for the remote control (key fob) functionality of the vehicle’s central locking and alarm system.
- Function: This kit provides the necessary electronic “guts” or specific internal circuit boards (the “sheets”) for the remote telecontroller. It’s responsible for transmitting the correct encrypted signals to the vehicle’s receiver module (part of the “Door Opening / Alarm Kit”) to lock, unlock, and arm/disarm the alarm. It works in conjunction with the remote key casing and battery.
- Components: Likely includes the primary circuit board for the remote key fob, potentially a specific chip or transponder element, and possibly small internal components required for its electronic operation. It typically does not include the physical key blade or the outer casing of the key fob.
- Security & Convenience Role: Essential for the wireless operation of your Maserati’s central locking and alarm system, offering the convenience of remote access and contributing to the vehicle’s overall security by enabling the arming and disarming of the alarm.
- Programming: The circuit board or its components will require programming and synchronization with the vehicle’s Body Control Module (BCM) and immobilizer system to ensure proper recognition and functionality. This is a specialized process usually performed by an authorized Maserati dealership or a qualified automotive locksmith.
- Material: High-quality electronic components mounted on a durable circuit board.
- Durability: Designed for reliability, but sensitive to physical shock, moisture ingress, or battery leaks.
Vertical Acceleration Sensor
SKU:
279398
$128.00
- Type: An electronic sensor designed to measure the vehicle’s linear acceleration along its vertical axis (i.e., up and down movement relative to the road surface). This is also commonly referred to as a “G-sensor” or “accelerometer.”
- Function: The vertical acceleration sensor provides critical real-time data to various sophisticated control systems within the vehicle. Its primary applications typically include:
- Active Suspension Systems: In vehicles equipped with adaptive or skyhook suspension, this sensor helps the control unit monitor road conditions and body movements, allowing the suspension to rapidly adjust damping forces to improve ride comfort and handling stability. It detects bumps, dips, and body pitch.
- Electronic Stability Program (ESP/MSP): While the Yaw Sensor measures rotational movement, the vertical acceleration sensor can provide supplementary data on body roll and pitch, contributing to the overall understanding of vehicle dynamics for stability control interventions.
- Headlight Leveling Systems: In some adaptive headlight systems, vertical acceleration data can help automatically adjust headlight aim based on vehicle load or road inclination.
- Airbag Systems: In highly advanced systems, vertical acceleration data might contribute to more precise deployment logic, especially in complex crash scenarios involving vertical forces.
- Components: A self-contained electronic unit typically containing a micro-electromechanical system (MEMS) accelerometer and associated signal processing circuitry, all enclosed in a durable housing with an electrical connector.
- Location: The sensor’s location is critical for accurate readings. It is usually mounted to the vehicle’s chassis, frame, or body, often near the center of gravity, or occasionally at individual wheel hubs for specific suspension applications.
- Material: Robust plastic or metal casing housing sensitive electronic components.
- Design: Engineered for high precision and rapid response, capable of detecting subtle changes in vertical motion to provide immediate feedback to control modules.
- Compatibility: Essential for the proper functioning of the specific systems it serves (e.g., active suspension) in the Maserati 4200, GranCabrio, GranTurismo, and other models.
Windshield Washer pump
SKU:
65358700
$30.58
The Windshield Washer Pump is a universally essential component for any vehicle, and your Maserati is no exception. It’s responsible for ensuring clear visibility by spraying washer fluid onto the windscreen, enabling the wiper blades to clean away dirt, dust, and debris. This pump is shared across several Maserati models, including the 4200, GranTurismo, and GranCabrio, which speaks to its robust and standardized design.
Product Name: Windshield Washer Pump
Application: Maserati 4200 GT (Coupé, Spyder, GranSport), GranTurismo, GranCabrio, and other compatible Maserati models.
Typical Part Number: 65358700 (This part number is widely cross-referenced for 4200, GranTurismo, GranCabrio, and even some Quattroporte models, making it a highly common Maserati washer pump).
Product Specifications:
- Type: Electric (12V DC) centrifugal or diaphragm pump.
- Function: Draws washer fluid from the reservoir and pressurizes it for delivery to the windshield washer jets (nozzles).
- Voltage: 12 Volts (standard automotive electrical system).
- Connections: Features a multi-pin electrical connector for power and activation signal, and an inlet/outlet for washer fluid hoses.
- Mounting: Typically designed to be directly mounted into the washer fluid reservoir via a rubber grommet seal.
- Material: Durable, high-grade plastic housing (e.g., ABS) and corrosion-resistant internal components, built to withstand various washer fluid compositions and operating temperatures.
- Flow Rate/Pressure: Engineered to deliver sufficient pressure and volume of fluid for effective and even spray across the entire windshield.
- Durability: Resistant to vibrations, thermal cycling, and potential clogging from impurities in washer fluid.
WindShield Wiper Housing
SKU:
66420800
$138.00
- Type: Exterior body trim panel / housing for the windshield wiper mechanism.
- Function:
- Protects the wiper motor, linkage (transmission), and associated wiring from water, debris, and environmental damage.
- Directs water run-off from the windshield away from the engine bay.
- Provides a finished aesthetic appearance at the base of the windshield.
- May integrate mounting points for washer jets or other sensors.
- Material: Typically high-grade, durable ABS plastic or a similar composite material, often UV-stabilized to prevent fading and cracking.
- Design: Precisely molded to fit the contours of the Maserati 4200’s cowl area, ensuring proper sealing against the windshield and fenders.
- Attachment: Secured by clips, screws, or a combination of fasteners, designed for firm retention while allowing for service access.
- Durability: Resistant to impact, heat, cold, and automotive chemicals.
- Components (if part of a larger assembly under this name): In some listings, this “housing” might refer to the main frame that holds the wiper motor and linkage. However, most commonly it refers to the visible exterior cover. The part number 66420800 specifically refers to a “Windshield Wiper Housing” that can be a larger assembly for the 4200.
Wiper Brush
SKU:
66959000
$21.39
-
- Type: Often conventional or beam-style (flat blade) wiper blade, designed for high-performance vehicles.
- Material: High-grade natural or synthetic rubber (e.g., EPDM, silicone) with a graphite or Teflon coating for smooth, silent operation.
- Length: Specific lengths for driver’s side and passenger’s side (e.g., approximately 22-24 inches for driver, 18-20 inches for passenger, always confirm exact lengths for your 4200).
- Attachment: Features a specific connector type (e.g., J-hook, side pin, or specific Maserati proprietary fitting) to securely mount to the wiper arm.
- Performance: Engineered for streak-free wiping, uniform pressure distribution across the glass, and quiet operation at various speeds.
- Durability: Resistant to UV degradation, extreme temperatures, and environmental contaminants for extended service life.
- Aerodynamics: May incorporate an aerodynamic design or spoiler to maintain blade contact at higher speeds.
- Package: Typically sold individually, or sometimes as a pair.
Yaw Sensor
SKU:
188172
$399.00
- Type: An electronic sensor that measures the vehicle’s angular velocity (rate of rotation) around its vertical axis (yaw). It’s a key component of the Electronic Stability Program (ESP) or Maserati Stability Program (MSP).
- Function: The yaw sensor constantly provides crucial data to the vehicle’s ESP/MSP control unit. By measuring how quickly the car is rotating or spinning on its own axis, the sensor helps the control unit determine if the vehicle is diverging from the driver’s intended path (as indicated by steering wheel angle and wheel speed). If the yaw rate is inconsistent with steering input and vehicle speed, the ESP/MSP system can then selectively apply individual brakes or reduce engine power to help bring the car back under control, preventing skids or loss of traction.
- Components: A self-contained electronic unit typically containing a micro-electromechanical system (MEMS) gyroscope, an accelerometer (often integrated to measure lateral acceleration), and associated signal processing circuitry, all enclosed in a durable housing with an electrical connector.
- Location: Often located in the vehicle’s cabin, typically under a seat, in the center console, or mounted to the floor pan, usually near the vehicle’s center of gravity. This placement ensures it accurately measures the entire vehicle’s movement without being unduly influenced by suspension articulation or external elements.
- Material: Robust plastic or metal casing housing sensitive electronic components.
- Design: Engineered for high precision and rapid response, crucial for dynamic stability control. It must be securely mounted to avoid erroneous readings from vibration.
- Compatibility: Essential for the proper functioning of the Maserati Stability Program (MSP/ESP) in the 4200.