LH Hinge / Left Hand Bonnet Hinge
SKU:
384300115
$265.00
Product Specifications:
- Type: A precision-engineered mechanical hinge designed to articulate and support the left-hand (driver’s side) side of the vehicle’s bonnet (hood).
- Function: Its primary purpose is to allow the bonnet to smoothly pivot open and closed, providing access to the engine compartment. It ensures the bonnet is held securely in alignment with the surrounding body panels when closed, and provides stable support when open, often incorporating a stop mechanism to prevent it from opening too far.
- Components: Typically consists of two main pivot arms or plates, a pivot pin or bolt, and potentially a spring mechanism (depending on design) for assistance in opening or holding the bonnet open. It is a robust metal assembly designed for long-term durability.
- Location: Mounted at the front of the vehicle, on the left-hand side of the engine compartment, connecting the bonnet to the vehicle’s chassis or fender structure.
- Material: Constructed from high-strength steel or aluminum, designed to withstand the weight of the bonnet, repeated opening/closing cycles, and environmental factors, often with a corrosion-resistant coating.
- Design: Precisely engineered with specific mounting points and pivot geometry to ensure correct bonnet alignment, smooth operation, and structural integrity, crucial for proper panel gaps and preventing the bonnet from fouling other components.
LH Longitudinal Harness
SKU:
200507
$176.00
- Type: A major, extensive electrical wiring loom that runs along the left-hand (driver’s) side of the vehicle, often routed along the chassis, underbody, or within the interior cabin structure.
- Function: This harness acts as a crucial electrical distribution pathway, carrying power, ground, and data signals to various components located along the left longitudinal section of the Maserati. It connects elements from the front of the vehicle to the rear, serving a multitude of systems including:
- Fuel System: Potentially fuel pump power, fuel level sender, and EVAP system components, if routed on this side.
- Rear Lighting: Taillights, brake lights, turn signals, reverse lights on the left side.
- Rear Sensors: Parking sensors, wheel speed sensors (ABS/ESP) for the left rear wheel, suspension sensors.
- Exhaust System Sensors: Oxygen sensors (post-catalytic converter) or temperature sensors.
- Body Control Modules/Relay Boxes: Connecting to any localized control units or relay boxes in the rear or side sections.
- Other Ancillary Systems: Various modules or actuators positioned along the left side of the undercarriage or within the rear quarter panel, or even specific interior components that draw power from this side’s main loom.
- Complexity: A highly complex and lengthy harness with numerous branches, multi-pin connectors, various wire gauges, and often protective sheathing, designed to withstand environmental factors.
- Location: Primarily routed along the vehicle’s left-hand chassis rail, underbody, or within the left rear quarter panel/sill area, connecting to the main body harness in the cabin or engine bay.
- Material: High-quality, automotive-grade copper wire with robust, weather-resistant, and abrasion-resistant insulation. Connectors are typically sealed and designed to prevent moisture and dirt ingress, crucial for underbody exposure.
- Design: Precisely engineered for routing along the vehicle’s frame, with specific lengths and connector orientations for each component, ensuring secure mounting and protection from road debris, moisture, heat, and vibration.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 chassis and components on the left-hand side. It is distinct from the right-hand longitudinal harness (e.g., P/N 200678).
LH Trunk Cover Carpet
SKU:
66916400
$174.00
- Type: A specific, contoured carpeted trim panel designed to line the left-hand (LH) side wall or a specific section of the left side of the trunk (boot) compartment. This is an interior trim piece, contributing to the finished look of the luggage area.
- Function: The primary functions of this LH trunk cover carpet include:
- Aesthetics: Provides a clean, upholstered, and uniform appearance to the left side of the trunk, concealing bare metal, wiring, and other structural components. It extends the vehicle’s luxurious interior aesthetic into the luggage compartment.
- Protection: Shields the vehicle’s bodywork and sensitive components (e.g., wiring, rear light assemblies, specific electronic modules) located on the left side of the trunk cavity from damage by shifting luggage or cargo. It also protects cargo from direct contact with hard or abrasive surfaces of the vehicle’s structure.
- Noise and Vibration Dampening: Helps to absorb road noise and vibrations that might emanate from the rear wheel well, suspension, or other components on the left side of the vehicle, contributing to a quieter and more refined cabin and trunk environment.
- Containment: Can help prevent smaller items from falling into inaccessible areas along the side of the trunk.
- Components: Typically a single, pre-cut, and molded piece of automotive-grade carpet. It often features a rigid backing (e.g., molded plastic or compressed fiberboard) to give it shape and durability. It will have specific contours, cutouts (e.g., for tie-down points, access panels, or light fixtures), and mounting points (clips, fasteners) to secure it in place.
- Location: Situated within the trunk compartment, specifically lining the left-hand side wall, often extending from the trunk floor up towards the trunk opening or rear seat bulkhead.
- Material: High-quality automotive carpet (e.g., cut pile, loop pile) designed to precisely match the existing trunk lining, often with a durable, sound-absorbing backing material. It is selected for its resistance to wear, fading, and spills.
- Design: Precisely molded and cut to fit the exact dimensions and contours of the Maserati 4200’s left-hand trunk wall, ensuring a snug, rattle-free fit and seamless integration with adjacent trunk trim pieces.
Maserati Mark / Maserati Trident Emblem
SKU:
67389900
$43.00
- Type: An authentic Maserati emblem or badge, typically featuring the iconic Trident logo.
- Function: Primarily serves as a distinctive brand identifier. These emblems are strategically placed on various parts of the vehicle (e.g., front grille, trunk lid, wheels, or interior trim) to signify its origin and premium status.
- Components: A single, molded emblem. It typically includes adhesive backing or mounting pins for secure attachment.
- Location: While the specific part number might refer to a particular location (e.g., trunk lid emblem, front grille emblem), without more specific information, it generally refers to an exterior or interior badge. Maserati vehicles often feature multiple Trident emblems.
- Material: Usually crafted from high-quality metal (chrome-plated, brushed aluminum) or durable automotive-grade plastic with a metallic finish, designed to withstand environmental exposure (UV, weather, car washes) and retain its luster.
- Design: Precisely sculpted to replicate the classic Maserati Trident logo, often with intricate details and a polished finish that reflects the brand’s heritage and luxury.
Master Superhigh Frequency Sensor
SKU:
186595
$129.00
- Type: Ultrasonic or microwave-based sensor for interior motion detection.
- Function: Part of the vehicle’s anti-theft alarm system. When the alarm is armed, this sensor emits and receives high-frequency sound waves (ultrasound) or electromagnetic waves (microwave/radar) within the vehicle’s cabin. It detects any significant changes in these waves caused by movement, such as an intruder entering the vehicle or even a window being broken.
- Detection Principle: Works on the principle of analyzing reflections of emitted waves. Any disruption to these reflections indicates movement inside the protected area, triggering the alarm.
- Coverage: Designed to cover the entire interior volume of the vehicle’s cabin.
- Location: Typically mounted in the overhead console, on the A-pillar, or in another strategic central location within the cabin to provide optimal coverage.
- Connectivity: Features an electrical connector to interface with the vehicle’s alarm control module or body control module (BCM).
- Material: Durable plastic housing designed to blend with the interior aesthetics while protecting sensitive internal electronic components.
- Sensitivity Adjustment: Some systems allow for sensitivity adjustment to prevent false alarms from environmental factors (e.g., strong vibrations, extreme temperature changes) or small animals left in the car (though not recommended for security reasons).
- Durability: Engineered for reliable long-term operation within the vehicle’s interior environment.
Number Plate Roof Lighting
SKU:
198231
$37.80
- Type: Rear License Plate Illumination Lamp Assembly.
- Function: Provides clear, white light to illuminate the vehicle’s rear license plate, ensuring it is visible and legible, especially during low-light conditions or at night.
- Light Source: Typically houses a standard incandescent bulb (e.g., C5W festoon bulb) or, in later versions, an integrated LED module.
- Housing Material: Durable, weather-resistant plastic (e.g., ABS or polycarbonate) with a clear or frosted lens.
- Sealing: Designed with integrated seals (gaskets) to prevent moisture and dirt ingress, protecting the bulb and electrical contacts.
- Mounting: Direct bolt-on or clip-in installation into the designated recess on the rear of the vehicle (trunk lid/boot or bumper).
- Connectivity: Features a dedicated electrical connector for power supply from the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant automotive lighting regulations for license plate visibility (e.g., ECE R4).
- Aesthetics: Designed to integrate discreetly and seamlessly into the rear design of Maserati vehicles.
Parking Sensor
SKU:
184929
$145.00
- Type: An ultrasonic sensor designed to detect obstacles in the vicinity of the vehicle, as part of the factory-installed parking assistance system.
- Function: This sensor emits high-frequency ultrasonic waves. When these waves encounter an obstacle, they bounce back to the sensor. The sensor then measures the time it takes for the waves to return, calculating the distance to the object. This distance information is sent to the parking assist control module, which then provides audible warnings (beeps) and sometimes visual feedback (on a display) to the driver, indicating the proximity of obstacles.
- Components: A compact, self-contained unit comprising an ultrasonic transducer (emitter/receiver), internal electronics, and an electrical connector. It is typically designed to snap or mount into a precisely sized opening in the bumper cover.
- Location: Embedded in specific locations within the front and/or rear bumper covers of the vehicle. Maserati 4200 models equipped with parking sensors will have multiple such sensors spaced across the bumpers.
- Material: Durable automotive-grade plastic housing, often unpainted or with a primer finish, allowing it to be painted to match the vehicle’s bumper color for seamless integration.
- Design: Small, round, or slightly oval-shaped, designed for flush mounting into the bumper, with weather-sealed construction to protect internal electronics from moisture and debris.
Passenger air bag – Blue “Navy”(“Navy” Blue) – 364010345
SKU:
66696715
$1,530.94
- Type: Supplemental Restraint System (SRS) Passenger’s Side Airbag Module
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
- Part Number: 364010345
- Color: Blu “Navy” (Navy Blue) to match specific Maserati interior trim codes
- Location: Integrated within the dashboard, above the glove compartment
- Deployment System: Pyrotechnic inflator, precisely controlled by the SRS control module and impact sensors
- Material: High-strength, tear-resistant coated polyamide (nylon) fabric bag concealed by a matching dashboard panel
- Safety Compliance: Engineered to meet stringent European (ECE) and relevant international automotive safety standards of its era
- Integration: Designed for seamless fit and aesthetic continuity with the Maserati 4200’s luxurious interior finishes.
Passenger air bag-grigo medio (medium grey) – 364010015
SKU:
66696716
$1,530.94
- Type: Supplemental Restraint System (SRS) Passenger’s Side Airbag Module
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007)
- Part Number: 364010015
- Color: Grigio Medio (Medium Grey) to perfectly match specific Maserati interior trim codes
- Location: Integrated within the dashboard, above the glove compartment
- Deployment System: Pyrotechnic inflator, precisely controlled by the SRS control module and vehicle impact sensors
- Material: High-strength, coated polyamide (nylon) fabric bag, concealed by a matching dashboard panel
- Safety Compliance: Engineered to meet stringent European (ECE) and relevant international automotive safety standards of its production era
- Integration: Designed for seamless fit and aesthetic continuity with the Maserati 4200’s luxurious interior finishes.
Passenger Airbag Deactivation Switch
SKU:
46481878
$31.13
- Type: Key-operated rotary switch
- Function: Manually enables or disables the front passenger airbag’s deployment.
- Location: Typically found on the side of the dashboard, often concealed when the passenger door is closed, or sometimes within the glove compartment.
- Indicator: Associated with a warning light on the dashboard (often an orange indicator with a graphic of a seated person with a deactivated airbag) to confirm the system’s status.
- Operation: Requires the ignition key to turn the switch to the “ON” or “OFF” position.
- Safety Interlock: Designed to only allow operation when the ignition is off, or with specific procedures to prevent accidental activation/deactivation while driving.
- Material: Durable plastic housing with internal electrical contacts and a tumbler for the key.
- Part Number: Specific to Maserati 4200 (e.g., Maserati part number 183234 or later supersessions like 46480451 for similar models, always verify with your VIN or a Maserati parts catalog for exact fitment for your 4200).
Passenger side windscreen wiper arm
SKU:
66665700
$45.76
- Type: Passenger’s side windscreen wiper arm
- Material: High-strength, corrosion-resistant metal alloy (e.g., steel or aluminum) with a durable black finish (powder-coated or painted).
- Function: Connects the wiper assembly’s pivot shaft to the wiper blade on the passenger side, facilitating the sweeping motion to clear the windscreen.
- Design: Precisely contoured and dimensioned, differing from the driver’s side arm, to match the specific geometry of the Maserati 4200’s windscreen and the wiper assembly’s synchronized sweep pattern for the passenger’s field of view.
- Attachment: Features a splined or conical mounting point for secure attachment to the wiper motor shaft (or linkage output) and a specific connector type for the wiper blade (e.g., hook, side pin, push button).
- Tension: Incorporates an internal spring mechanism to maintain consistent, optimal pressure of the wiper blade against the glass, ensuring effective and streak-free clearing.
- Durability: Engineered to endure prolonged exposure to harsh environmental factors, including UV radiation, varying temperatures, rain, snow, and road debris, without compromising integrity.
- Vehicle Specificity: Designed distinctly for either Left-Hand Drive (LHD) or Right-Hand Drive (RHD) models, given the different lengths and sweep angles required based on the vehicle’s steering configuration.
Pipe from Compressor to Filter
SKU:
66063100
$147.62
- Type: High-pressure liquid refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports high-pressure, liquid refrigerant from the outlet of the A/C condenser to the inlet of the receiver/drier (often referred to as the “filter” in this context). This is a critical step before the refrigerant proceeds to the expansion valve.
- Location: Runs from the A/C condenser (at the front of the vehicle) to the receiver/drier (typically mounted near the condenser or in the wheel well area).
- Material: Constructed primarily from rigid, high-strength aluminum alloy tubing, often with specialized flexible hose sections to accommodate routing and dampen vibrations.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, specialized couplers) at both ends, designed to maintain a leak-proof seal under high pressures.
- Durability: Engineered to withstand the significant pressures and varying temperatures encountered on the high-pressure side of the A/C system, as well as road vibrations and environmental exposure.
- Compatibility: Designed specifically for the Maserati 4200’s engine bay layout and A/C system components, ensuring correct length, bends, and fitting types.
Pipe from Union to Compressor
SKU:
67028000
$132.23
- Type: Low-pressure refrigerant line (suction line) within the Air Conditioning (A/C) system.
- Function: Transports low-pressure, gaseous refrigerant from the evaporator’s outlet (or a common “union” manifold after the evaporator/accumulator) back to the inlet side of the A/C compressor, completing the low-pressure side of the refrigeration cycle.
- Location: Runs from the area of the firewall (where the evaporator connections are) through the engine bay to the A/C compressor mounted on the engine.
- Material: Typically constructed from a combination of flexible, high-pressure synthetic rubber hose and rigid aluminum alloy tubing, designed for durability and vibration dampening.
- Connections: Features specific, sealed fittings (e.g., O-ring connections, specialized quick-connects) at both ends to ensure a leak-proof seal under the system’s low operating pressures.
- Insulation: Often includes external insulation (e.g., foam sleeve) to prevent heat absorption from the engine bay into the cold, low-pressure refrigerant, which improves A/C efficiency.
- Durability: Engineered to withstand continuous exposure to engine heat, vibrations, and the specific pressures of the A/C system.
- Compatibility: Designed precisely for the Maserati 4200’s engine bay layout and A/C system components, ensuring correct length, routing, and fitting types.
Pipe fron Filter to Union
SKU:
66063200
$91.66
- Type: High-pressure liquid refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports purified, high-pressure, liquid refrigerant from the outlet of the receiver/drier (the “filter”) directly to the inlet of the expansion valve (the “union”). This is the final high-pressure line before the refrigerant enters the cabin’s evaporator.
- Location: Typically runs from the receiver/drier (often mounted near the condenser or wheel well) towards the firewall where the expansion valve is usually located.
- Material: Primarily constructed from rigid, durable aluminum alloy tubing, often incorporating flexible, high-pressure reinforced synthetic rubber hose sections to manage routing and absorb vibrations.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, specialized couplers) at both ends, engineered to maintain a leak-proof seal under the continuous high pressures of the liquid line.
- Durability: Designed to withstand the high pressures (typically 150-300 psi or 10-20 bar), varying temperatures, and engine vibrations inherent in the A/C system.
- Compatibility: Precisely manufactured to fit the specific routing, lengths, and fitting types required by the Maserati 4200’s A/C system and engine bay layout.
Pipe fron Union to Evaporator
SKU:
66244200
$110.23
- Type: Refrigerant line within the Air Conditioning (A/C) system.
- Function: Transports low-pressure, atomized (partially vaporized) liquid refrigerant from the expansion valve (union point) to the evaporator coil located inside the vehicle’s cabin. This is typically the “cold side” return line.
- Location: Connects the engine bay side of the A/C system (often where the expansion valve is located on the firewall) to the evaporator core within the dashboard/HVAC unit.
- Material: Constructed from durable, corrosion-resistant aluminum alloy tubing, often combined with flexible rubber or composite hoses at connection points for vibration dampening and routing flexibility.
- Connections: Features precise, sealed fittings (e.g., O-ring connections, flared fittings) at both ends to ensure a leak-proof seal under varying pressure and temperature conditions.
- Insulation: May include external insulation (e.g., foam sleeve) to prevent heat absorption from the engine bay into the cold refrigerant line, improving A/C efficiency.
- Durability: Engineered to withstand the high and low pressures of the A/C system, constant temperature fluctuations, and engine vibrations.
- Compatibility: Designed specifically for the Maserati 4200’s chassis and A/C system, ensuring correct length, bends, and fitting types.
Plug
SKU:
67233800
$70.00
- Type: Multi-pin electrical connector (e.g., 2-pin, 4-pin, etc.)
- Design: Often features a secure locking mechanism (e.g., locking tabs, slide locks) to prevent accidental disconnection.
- Color Coding: Typically features bright yellow or orange housing, which is a universal industry standard for SRS (Supplemental Restraint System) wiring, indicating high-voltage or critical safety circuits.
- Material: Durable, high-quality plastic housing with precise metal terminals.
- Protection: Often sealed or semi-sealed to protect against moisture and dust.
- Application Specificity: Each connector is uniquely designed for its specific component (e.g., airbag inflator, sensor, SRS module), preventing incorrect connections.
- Conductivity: Designed for low resistance to ensure reliable signal and power transmission.
Pollen Filter
SKU:
382400304
$49.33
- Type: Air filtration element for the vehicle’s heating, ventilation, and air conditioning (HVAC) system.
- Function: Filters incoming air before it enters the passenger cabin, removing airborne contaminants such as dust, pollen, mold spores, soot, exhaust fumes, and other particulate matter. Carbon-activated versions also filter odors.
- Location: Typically located in the passenger footwell, often accessible from underneath the glove box.
- Material: Usually made from a pleated paper-like material, synthetic fibers, or a combination of these. Many modern replacements, including some for this part number, are activated carbon filters for enhanced odor absorption.
- Design: Rectangular shape with a specific size and airflow direction marked to ensure correct installation.
- Maintenance Interval: Recommended replacement typically every 15,000 to 30,000 miles or annually, depending on driving conditions and environment. In dusty or polluted areas like Douala, more frequent replacement may be necessary.
- Compatibility: Designed for precise fitment into the Maserati 3200 and 4200 HVAC housing.
Pressostat
SKU:
46476438
$83.88
- Type: Electrical pressure-sensitive switch or sensor.
- Function: Monitors the refrigerant pressure within the A/C system (typically on the high-pressure side, but some are dual-function for both high and low pressure). It sends electrical signals to the Engine Control Unit (ECU) or A/C control module.
- Safety Role: Acts as a crucial safety device, preventing the A/C compressor from operating if refrigerant pressure is either too low (indicating a leak and risk of compressor damage due to lack of lubrication) or too high (indicating a blockage or overcharge, which could lead to system damage or even rupture).
- Compressor Control: Helps regulate the A/C compressor’s engagement and disengagement based on pressure thresholds, ensuring optimal system performance and protection.
- Fan Control: In some systems, it can also send signals to control the radiator/condenser cooling fans, activating higher speeds when refrigerant pressure rises.
- Connectivity: Features specific electrical pins (often 3 or 5 pins) for power, ground, and signal output, connecting to the vehicle’s wiring harness.
- Thread Size: Commonly has a specific thread size (e.g., 7/16 UNF or similar) for sealing into the A/C line.
- Refrigerant Compatibility: Designed for R134a refrigerant, standard for vehicles of this era.
- Material: Durable metal body (brass or aluminum) with a sealed electrical connector and robust internal pressure-sensing diaphragm/sensor.
Radiator Grille Assembly
SKU:
67811300
$827.00
- Type: A complete assembly for the prominent front grille of the Maserati 4200, which is a key aesthetic and functional element of the vehicle’s front fascia.
- Function: The primary functions of the radiator grille assembly include:
- Engine Cooling: Allows essential airflow into the engine bay to cool the radiator, condenser (for AC), and other heat exchangers, preventing engine overheating.
- Aesthetics: Serves as a defining design feature of the Maserati 4200, contributing significantly to its distinctive, aggressive, and elegant appearance. It typically houses the iconic Maserati Trident emblem.
- Protection: Shields the delicate radiator fins and other front-mounted components from larger road debris (e.g., stones, leaves, small animals) while still allowing air passage.
- Component Integration: Provides the mounting point for the Maserati emblem and sometimes for other elements like parking sensors or specific trim pieces.
- Components: A “complete” radiator grille assembly (Part Number 67811300) typically includes:
- The main grille frame (outer surround).
- The grille mesh or slats (inner pattern).
- Mounting tabs or points for attachment to the front bumper and/or vehicle body.
- May or may not include the Maserati Trident emblem, which is often sold separately, though sometimes integrated.
- Location: Centrally located at the very front of the vehicle, within the opening of the front bumper.
- Material: Often constructed from durable automotive-grade plastics (ABS, polypropylene) with various finishes (e.g., chrome plating, matte black, gloss black), or in some high-end or specialized versions, lightweight metals (aluminum). Designed to withstand environmental exposure and minor impacts.
- Design: Precisely contoured and styled to match the specific design language of the Maserati 4200, ensuring seamless integration with the front bumper, headlights, and hood.
Red Valet Key One Button
SKU:
980001802
$213.00
- Type: Integrated remote key fob, combining a physical ignition key blade with a simplified remote control.
- Color: Distinctive red casing, often used by manufacturers to denote a valet or limited-access key.
- Buttons: Typically features a single button for remote lock/unlock functionality, or sometimes just a lock function, depending on the precise design and intended limitation.
- Internal Components: Contains a transponder chip (for immobilizer function) and a basic remote control circuit board powered by a small battery.
- Key Blade: Includes an un-cut or pre-cut metal key blade that mechanically operates the ignition and door locks.
- Security Features: The integrated transponder chip is crucial for the vehicle’s immobilizer system, allowing the engine to start only when an authorized key is detected.
- Valet-Specific Limitations: Designed to offer limited access or functionality. While it can start the car, it typically cannot unlock the trunk/boot or glovebox, or it may disable certain infotainment features when in use, protecting personal belongings and settings when the car is handed over for valet service.
- Material: Durable molded plastic casing.
- Programming: Requires specialized programming by a Maserati dealership or a qualified automotive locksmith to synchronize the remote functions with the vehicle’s Body Control Module (BCM) and to code the transponder chip to the Immobilizer ECU for engine starting.
Relay Complete Cable
SKU:
980138211
$687.37
- Type: Pre-assembled electrical wiring harness or pigtail, typically including a connector for a relay and the associated wiring for a specific electrical circuit. It may or may not include the relay itself.
- Function: Facilitates the correct electrical connection for a specific relay to power and control a high-current component or system within the vehicle. Relays are used to allow a low-current control signal (from a switch or ECU) to switch a much higher current to a load (e.g., fuel pump, cooling fan, starter motor, F1 pump, lights). This “complete cable” ensures proper current flow and protection for that specific circuit.
- Location: The exact location depends on the specific function it serves. It could be in the engine bay, near a fuse box, or closer to the component it powers.
- Components: Consists of insulated copper wires, a specific multi-pin connector for a relay, and potentially other terminals or connectors for connecting to the power source and the electrical load. The gauge of the wires is suited for the intended current.
- Material: High-quality automotive-grade copper wire with durable, heat-resistant, and flexible insulation. Connectors are typically robust plastic with corrosion-resistant metal terminals.
- Durability: Engineered to withstand the harsh automotive environment, including vibrations, temperature fluctuations, and potential exposure to moisture or chemicals, specific to its installed location.
- Compatibility: Designed for precise fitment and electrical compatibility with the Maserati 4200’s electrical system, ensuring correct voltage, current carrying capacity, and signal integrity for the intended function.
Removable Carpet Kit
SKU:
981206007
$167.00
- Type: A set of tailor-fitted, removable floor mats designed for the interior cabin of the Maserati 4200 GT. This “kit” typically includes mats for both the driver and passenger footwells, and potentially smaller mats for the rear seating area if applicable to the specific body style.
- Function: The primary functions of this removable carpet kit include:
- Protection: Shields the vehicle’s original factory carpeting from dirt, moisture, spills, wear, and abrasion caused by shoes, sand, mud, and other debris. This preserves the condition and resale value of the interior.
- Aesthetics: Enhances the interior’s luxury appeal by providing a fresh, clean, and color-matched surface. The “Blu (Blue)” color adds a specific aesthetic touch to the cabin.
- Comfort: Provides an additional layer of cushioning underfoot for occupants, enhancing ride comfort.
- Noise Dampening: Offers a minor contribution to acoustic insulation, helping to absorb some road noise and foot traffic sounds.
- Safety: Designed with anti-slip backing and/or retention clips to prevent the mats from sliding under pedals, ensuring driver safety.
- Components: Typically includes a driver’s side front mat, a passenger’s side front mat. For Coupé models, smaller rear mats might also be included depending on the specific kit configuration. Each mat is precisely cut and molded to fit the contours of the Maserati’s floor.
- Location: Placed directly on top of the vehicle’s factory carpet in the footwell areas of the cabin.
- Material: High-quality automotive-grade carpet (e.g., deep pile, luxury velour) designed for durability, stain resistance, and color retention. The “Blu (Blue)” specifies the exact color. The underside typically features a non-slip backing (e.g., rubber nubs, specialized fabric).
- Design: Custom-tailored to the specific floor dimensions of the Maserati 4200, often featuring embroidered logos (e.g., Maserati Trident) or reinforced heel pads on the driver’s mat. Designed to integrate with factory mat retention hooks or posts.
Resistor
SKU:
183276
$81.00
- Type: An electrical resistor component, most commonly identified as a blower motor resistor for the vehicle’s heating, ventilation, and air conditioning (HVAC) system.
- Function: In its common application as a blower motor resistor, it controls the speed of the HVAC blower fan. It does this by creating resistance in the electrical circuit, which in turn reduces the voltage supplied to the blower motor. Different resistance values correspond to different fan speeds (e.g., low, medium, high). If used in another circuit, its function would be to limit current flow or drop voltage as required by that specific circuit.
- Components: Typically consists of one or more resistive elements (often coiled wires or ceramic resistors) mounted on a heat sink to dissipate heat generated by the resistance. It will have an electrical connector for integration into the vehicle’s wiring harness.
- Location: If it’s a blower motor resistor, it is usually located within the HVAC housing, often accessible from under the dashboard, near the blower motor itself. This placement allows it to utilize the airflow from the blower fan to help dissipate heat. For other applications, its location would vary depending on the circuit it serves.
- Material: Resistive elements are usually made of alloys like nichrome. The base is often ceramic or metal (for heat dissipation), encased in a durable plastic or metal housing with electrical terminals.
- Design: Engineered to provide specific resistance values required for its intended electrical circuit and to withstand the electrical current and heat generated during operation.
RH Bracket
SKU:
66379200
$33.00
- Type: Right-Hand (RH) side structural support bracket for the headlight assembly.
- Function: Provides precise and secure mounting points for the headlight unit, ensuring correct alignment, stability, and vibration dampening. It integrates the headlight assembly securely into the vehicle’s front body structure.
- Location: Situated within the front fascia/fender area on the right side of the vehicle, behind the headlight opening.
- Material: Typically robust stamped steel or lightweight, high-strength aluminum alloy, often coated or painted for corrosion resistance.
- Design: Precision-engineered to match the specific contours of the Maserati 4200’s chassis and headlight assembly (especially relevant for Xenon variants which might have different weight/mounting points). Features pre-drilled holes and threaded inserts for accurate bolt-on installation.
- Durability: Built to withstand constant vibrations, minor impacts, and environmental exposure without deforming or compromising headlight stability.
- Vehicle Specificity: Designed exclusively for the Maserati 4200 platform, ensuring exact fitment and structural integrity.
RH HeadLight
SKU:
190712050
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Primarily utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Depending on the original vehicle specification, it may accommodate Xenon (HID) bulbs and ballasts.
- Lens Material: High-grade, UV-stabilized polycarbonate or glass for superior clarity and resistance to hazing or yellowing over time.
- Housing Material: Durable, heat-resistant, and impact-resistant plastic (e.g., polypropylene) designed to protect internal components and dissipate heat effectively.
- Mounting: Engineered for a direct bolt-on replacement, ensuring precise alignment and fitment with existing factory mounting points on the Maserati 4200’s chassis.
- Connectivity: Equipped with integrated electrical connectors for seamless plug-and-play connection to the vehicle’s wiring harness.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) for optimal light distribution and safety.
- Aesthetics: Designed to perfectly complement the iconic front fascia of the Maserati 4200, preserving its original luxurious and sporty appearance.
RH HeadLight
SKU:
980000928
$359.75
- Type: Complete Right-Hand (RH) Headlight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Lighting Technology: Typically Halogen-based for main low and high beams. Includes integrated turn signal, parking light, and potentially side marker functions.
- Lens Material: Durable, high-clarity polycarbonate or glass, often treated with a UV-protective coating to resist yellowing, hazing, and cracking over time.
- Housing Material: Robust, heat-resistant, and impact-resistant plastic (e.g., polypropylene) forming the main body of the assembly, designed to protect internal components and dissipate heat.
- Reflectors/Projectors: Precisely engineered internal reflectors to optimally direct the light beam for maximum illumination and minimal glare, or a projector lens system (depending on design variant).
- Mounting: Designed for direct, bolt-on replacement, ensuring perfect fitment and alignment with the Maserati 4200’s front fascia and existing chassis mounting points.
- Connectivity: Features integrated electrical connectors for plug-and-play installation, connecting seamlessly with the vehicle’s electrical harness.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) for light output, pattern, and safety.
- Aesthetics: Matches the original factory design and finish of the Maserati 4200, preserving the vehicle’s distinctive and elegant front-end appearance.
RH HeadLight – Giallo GranTurismo
SKU:
190712046
$952.53
- Type: Complete Right-Hand (Passenger Side in Left-Hand Drive vehicles) Headlight Assembly.
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Typically utilizes Halogen bulbs for low and high beams, with integrated turn signal and parking light functions. Some models may have Xenon (HID) options depending on original specification.
- Lens Material: High-clarity polycarbonate or glass, UV-treated for resistance against yellowing and hazing.
- Housing Material: Durable, heat-resistant plastic (e.g., polypropylene), designed for optimal heat dissipation and protection of internal components.
- Mounting: Direct bolt-on replacement, matching original factory mounting points for precise fitment and alignment.
- Connectivity: Features integrated electrical connectors for plug-and-play installation with the vehicle’s wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets).
- Aesthetics: Designed to seamlessly integrate with the Maserati 4200’s distinct front fascia, maintaining its iconic styling.
RH Headlight – Grigio Nuvolari(Cod. PPG 226686 – 238643) (Nuvolari Grey (Cod. PPG 226686 – 238643))
SKU:
190712039
$952.53
- Type: Complete Right-Hand (RH) Headlight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Application: Specifically designed for Maserati 4200 GT (Coupé, Spyder, and GranSport models, 2001-2007).
- Lighting Technology: Typically equipped for Halogen bulbs for both low and high beams. It integrates essential turn signal and parking light functions. Depending on the vehicle’s original specification, it may be designed to accommodate Xenon (HID) lighting components (bulbs, igniters, ballasts).
- Lens Material: High-grade, UV-stabilized polycarbonate or glass, engineered for exceptional clarity and long-term resistance to yellowing, hazing, and cracking.
- Housing Material: Durable, high-quality, heat-resistant plastic (e.g., polypropylene) that forms the structural body of the assembly, providing protection for internal components and efficient heat dissipation.
- Reflectors/Projectors: Precision-engineered internal reflectors and/or projector lenses (depending on variant) to ensure optimal light distribution, beam pattern, and minimal glare.
- Mounting: Designed for a direct, bolt-on replacement, guaranteeing precise fitment and alignment with the Maserati 4200’s front bodywork and existing mounting points.
- Connectivity: Features dedicated electrical connectors for seamless, plug-and-play integration with the vehicle’s electrical system.
- Regulatory Compliance: Manufactured to meet or exceed relevant international automotive lighting standards (e.g., ECE regulations for European markets) concerning light output and safety.
- Aesthetics: Engineered to perfectly match the original factory appearance, preserving the distinctive and sophisticated front-end design of the Maserati 4200.
RH Longitudinal Harness
SKU:
200678
$672.00
- Type: A major, extensive electrical wiring loom that runs along the right-hand (passenger) side of the vehicle’s underbody or chassis.
- Function: This harness acts as a crucial electrical distribution pathway, carrying power, ground, and data signals to various components located along the right longitudinal section of the Maserati. It connects elements from the front of the vehicle to the rear, serving a multitude of systems including:
- Fuel System: Potentially fuel pump power, fuel level sender, and EVAP system components.
- Rear Lighting: Taillights, brake lights, turn signals, reverse lights on the right side.
- Rear Sensors: Parking sensors, wheel speed sensors (ABS/ESP) for the right rear wheel, suspension sensors.
- Exhaust System Sensors: Oxygen sensors (post-catalytic converter) or temperature sensors.
- Body Control Modules/Relay Boxes: Connecting to any localized control units or relay boxes in the rear or side sections.
- Other Ancillary Systems: Various modules or actuators positioned along the right side of the undercarriage or within the rear quarter panel.
- Complexity: A highly complex and lengthy harness with numerous branches, multi-pin connectors, various wire gauges, and often protective sheathing, designed to withstand external environmental factors.
- Location: Primarily routed along the vehicle’s right-hand chassis rail, underbody, or within the right rear quarter panel, connecting to the main body harness in the cabin or engine bay.
- Material: High-quality, automotive-grade copper wire with robust, weather-resistant, and abrasion-resistant insulation. Connectors are typically sealed and designed to prevent moisture and dirt ingress, crucial for underbody exposure.
- Design: Precisely engineered for routing along the vehicle’s frame, with specific lengths and connector orientations for each component, ensuring secure mounting and protection from road debris, moisture, heat, and vibration.
- Compatibility: Engineered for precise electrical and physical fitment with the Maserati 4200 chassis and components on the right-hand side. It is distinct from the left-hand longitudinal harness.
RH Rear TailLight
SKU:
195847
$282.85
- Type: Complete Right-Hand (RH) Rear Taillight Assembly (Passenger Side for Left-Hand Drive vehicles).
- Function: Integrates multiple lighting functions including:
- Brake Light: Red, illuminates brightly when brakes are applied.
- Running/Tail Light: Red, continuous illumination for rear visibility.
- Turn Signal/Indicator: Amber, flashing light for signaling turns or lane changes.
- Reverse/Backup Light: White, illuminates when reverse gear is engaged.
- Rear Fog Light (if applicable): Red, typically brighter than running lights, for low visibility.
- Light Source: Primarily uses incandescent bulbs for various functions, though some aftermarket or specific market variants might incorporate LEDs.
- Lens Material: Durable, high-quality, impact-resistant polycarbonate or acrylic plastic, designed for optimal light transmission and color integrity.
- Housing Material: Robust, sealed plastic housing that protects internal wiring, bulb sockets, and reflectors from moisture, dust, and vibration.
- Mounting: Designed for direct, bolt-on replacement, ensuring precise fitment and alignment with the Maserati 4200’s rear bodywork.
- Connectivity: Features a dedicated multi-pin electrical connector for plug-and-play integration with the vehicle’s rear wiring harness.
- Regulatory Compliance: Engineered to meet or exceed relevant international automotive lighting standards (e.g., ECE R7, R6, R23, R38) for light output, color, and pattern.
- Aesthetics: Matches the original factory design, contributing significantly to the Maserati 4200’s distinctive and elegant rear styling.