ABS/ASR Hydraulic Unit
SKU:
307023
$1,878.00
- Type: A vital electronic and hydraulic component that forms the core of the vehicle’s Anti-lock Braking System (ABS) and Anti-Slip Regulation (ASR) also known as Traction Control. It is an intricate assembly responsible for precisely controlling brake fluid pressure to each wheel independently.
- Function: The primary functions of this ABS/ASR Hydraulic Unit are critical for vehicle safety, stability, and control:
- ABS (Anti-lock Braking System): During hard braking, it rapidly modulates brake fluid pressure to individual wheels to prevent them from locking up. This allows the driver to maintain steering control and reduce stopping distances on slippery surfaces.
- ASR (Anti-Slip Regulation / Traction Control): During acceleration, it detects wheel spin and selectively applies the brakes to the slipping wheel(s) and/or reduces engine power to restore traction and maintain vehicle stability, especially on low-grip surfaces or during aggressive acceleration.
- Electronic Stability Program (ESP/MSP – Maserati Stability Program): In conjunction with the ABS/ASR control module (often integrated), it forms the hydraulic actuator for the full Electronic Stability Program, which intervenes during oversteer or understeer situations to help keep the vehicle on its intended path.
- Components: The hydraulic unit typically consists of:
- Hydraulic Block/Manifold: Contains a series of electrically controlled solenoid valves (one or more per brake circuit) that open and close rapidly to regulate fluid pressure.
- Electric Pump: A high-pressure electric pump that re-pressurizes the brake fluid that is momentarily released by the valves back into the brake lines.
- Accumulators: Small reservoirs to store pressurized fluid.
- Note: This unit often comes with, or is designed to integrate with, the ABS/ASR Electronic Control Unit (ECU/Module), which is the “brain” that sends commands to the hydraulic unit based on sensor input. Some part numbers may include both, while others are just the hydraulic block.
- Location: Typically mounted within the engine bay, often near the master cylinder, and connected to the brake lines.
- Material: Constructed from durable metals (e.g., aluminum, steel) for the hydraulic manifold and pump housing, with precision-machined internal components, high-quality seals, and robust electrical connections.
- Design: A highly complex and precisely calibrated electromechanical device, specifically engineered to the braking and stability performance requirements of the Maserati GranCabrio and GranTurismo, ensuring rapid response times and accurate pressure modulation.
Air Conditioning Condenser
SKU:
228388
$560.00
- Type: A heat exchanger component that is an essential part of the vehicle’s air conditioning (A/C) system. Its function is to dissipate heat from the high-pressure, gaseous refrigerant, causing it to condense into a high-pressure liquid.
- Function: The primary functions of the A/C condenser are critical for the operation of the air conditioning system and cabin comfort:
- Refrigerant Cooling & Condensation: Receives hot, high-pressure gaseous refrigerant from the A/C compressor. As air flows across its fins, heat is transferred from the refrigerant to the outside air, causing the refrigerant to cool down and change state from a gas to a liquid.
- Heat Rejection: Acts as a radiator for the A/C system, releasing the heat absorbed from the vehicle’s cabin into the surrounding atmosphere.
- System Efficiency: Proper heat exchange within the condenser is vital for the overall efficiency and cooling performance of the entire A/C system.
- Components: Typically consists of a series of coiled tubes (often multi-flow parallel plate design for efficiency) with numerous thin fins between them to maximize surface area for heat exchange. It has inlet and outlet ports for refrigerant lines and mounting points for installation. It often includes an integrated receiver-drier or drier cartridge, though sometimes these are separate components.
- Location: Mounted at the very front of the vehicle, usually in front of the engine’s main radiator, to ensure maximum airflow from the vehicle’s forward motion and the cooling fans.
- Material: Most commonly constructed from lightweight and highly conductive aluminum alloys (tubes and fins) due to their excellent heat transfer properties and corrosion resistance.
- Design: Precisely engineered to fit within the confined space of the vehicle’s front end and to optimize airflow and heat exchange for the specific cooling requirements of Maserati’s luxurious cabins.
Complete Body Shell
SKU:
980145331
$30,294.00
- Type: This part number refers to the entire bare metal unibody structure of the Maserati GranCabrio. It is the fundamental chassis of the vehicle before any exterior panels (fenders, doors, hood, trunk lid), interior components, powertrain, suspension, or electrical systems are installed. It represents the vehicle’s foundational skeleton.
- Function: The primary and most critical functions of the complete body shell are:
- Structural Foundation: Serves as the ultimate framework that all other vehicle components (engine, transmission, suspension, interior, exterior panels) are mounted to.
- Occupant Safety Cage: Designed with carefully engineered crumple zones and a rigid passenger cell to absorb and dissipate crash energy during impacts (frontal, side, rear, rollover), thereby protecting occupants.
- Torsional Rigidity: Provides the vehicle’s stiffness and resistance to twisting forces. For a convertible like the GranCabrio, this is especially critical, as the absence of a fixed roof requires significant underbody and pillar reinforcements to maintain structural integrity and dynamic performance.
- Platform for Assembly: Contains all the necessary mounting points, brackets, and channels for the subsequent installation of all vehicle systems and components.
- Components: The complete body shell includes the welded assembly of the following major structural elements (unpainted, unprimed):
- Floor pan (front, middle, rear sections, including transmission tunnel)
- Front and rear frame rails (longitudinal members)
- Rocker panels (side sills)
- A-pillars, B-pillars (if present in convertible design for structural or roll-over protection)
- Windshield frame
- Rear bulkhead (firewall between cabin and trunk)
- Suspension mounting points (strut towers, subframe attachment points)
- Roll-over protection system mounting points (for GranCabrio)
- It does NOT include: doors, hood, trunk lid, fenders, bumpers, roof components (soft top mechanism), glass, interior trim, wiring, engine, transmission, suspension components, or wheels.
- Location: The core structure of the entire vehicle.
- Material: Constructed from various grades of high-strength steel (HSS), Ultra-High Strength Steel (UHSS), and potentially some lightweight alloys (e.g., aluminum) in specific areas, strategically chosen for optimal strength, rigidity, crash performance, and weight optimization.
- Design: An extremely complex, multi-piece welded assembly, precisely engineered to the exact dimensions and specifications of the Maserati GranCabrio. The design specifically accounts for the unique structural demands of an open-top vehicle, incorporating extensive reinforcements (e.g., thicker gauges, additional cross-members, stronger A-pillars) to compensate for the absence of a rigid roof, ensuring the renowned Maserati handling and safety standards are met.
Complete Steering Tie Rod Assembly
Parts, Driving Controls, All Categories, Steering Column And Steering Wheel Unit (Available With: Special Edition)
SKU:
239259
$1,401.00
- Type: This part number refers to a complete steering tie rod assembly. A tie rod is a crucial component of the steering system that connects the steering rack (or steering box) to the steering knuckle or wheel hub, allowing the front wheels to turn in response to steering wheel input. The “complete” designation usually means it includes both the inner tie rod end (which connects to the steering rack) and the outer tie rod end (which connects to the steering knuckle), along with the connecting rod that links them, and typically protective boots.
- Function: The primary functions of the complete steering tie rod assembly are fundamental to steering control, vehicle handling, and safety:
- Translates Steering Input: Converts the linear motion of the steering rack into the angular motion of the front wheels, enabling the vehicle to steer.
- Wheel Alignment: Plays a critical role in maintaining proper toe adjustment (the inward or outward angle of the wheels when viewed from above), which is essential for stable handling, even tire wear, and fuel efficiency.
- Suspension Linkage: Acts as a flexible link, allowing for vertical wheel travel and absorption of road irregularities while maintaining steering integrity.
- Safety: A secure and properly functioning tie rod is vital for precise steering control and preventing loss of control.
- Components: A complete steering tie rod assembly typically includes:
- Inner Tie Rod End: A ball-and-socket joint that attaches to the steering rack, often covered by a protective boot.
- Outer Tie Rod End: Another ball-and-socket joint that attaches to the steering knuckle, also covered by a boot.
- Adjusting Sleeve/Rod: A threaded rod connecting the inner and outer ends, allowing for length adjustment to set wheel alignment (toe).
- Protective Boots: Rubber or thermoplastic boots that seal the ball joints, protecting them from dirt, moisture, and debris.
- Location: Extends horizontally from the steering rack (located behind the engine or suspension crossmember) outwards to the steering knuckle at each front wheel. There is one tie rod assembly per front wheel.
- Material: Primarily constructed from high-strength steel alloys for the rods and ball joint housings, with hardened steel ball studs and bearings. The protective boots are made of durable, flexible rubber or thermoplastic.
- Design: Precision-engineered to withstand significant dynamic forces, resist wear, and provide smooth, play-free articulation. The design is specific to the GranCabrio and GranTurismo’s front suspension geometry to ensure accurate steering response and proper wheel alignment.
Complete Steering Wheel Assembly
Parts, Driving Controls, All Categories, Steering Column And Steering Wheel Unit (Available With: Special Edition)
SKU:
28616600
$1,510.00
- Type: This part number refers to the entire steering wheel assembly, excluding the airbag module. It comprises the steering wheel frame, rim, spokes, and typically includes the leather wrapping, stitching, and any integrated trim pieces or functional buttons that are permanently attached to the wheel.
- Function: The primary functions of this steering wheel assembly are paramount for vehicle control, driver interaction, and interior aesthetics:
- Vehicle Control: Serves as the primary interface for the driver to steer the vehicle, directly controlling the front wheels’ direction.
- Driver Interface: Integrates various essential controls, such as multimedia controls, cruise control buttons, and potentially paddle shifters (depending on specification), allowing the driver to operate functions without removing hands from the wheel.
- Aesthetics & Ergonomics: Contributes significantly to the interior’s luxurious feel and sporty design, offering a tactile and visually appealing focal point in the cockpit. The “Nero” (Black) leather and specific stitching enhance this premium experience.
- Safety (Airbag Mounting): Provides the robust and precisely engineered mounting point for the driver’s airbag module, ensuring correct and safe airbag deployment in a collision.
- Components: The assembly typically includes:
- The steering wheel frame (metal core)
- The outer rim, often wrapped in high-quality leather.
- The spokes, also leather-wrapped or trimmed in matching materials.
- Integrated multi-function buttons (e.g., for audio, phone, voice control) on the spokes.
- Any decorative trim elements (e.g., chrome, carbon fiber, or wood inserts if originally specified).
- Often, the mounting points for paddle shifters (if the vehicle is equipped with them).
- It does NOT include the driver’s airbag module, horn button assembly (if separate), or clock spring/spiral cable.
- Location: The main control input device positioned directly in front of the driver in the vehicle’s cabin.
- Material: The core is typically a high-strength metal alloy (e.g., magnesium or aluminum), over-molded with foam and then meticulously wrapped in premium automotive-grade leather (specified as “Nero” Black) with durable stitching (often contrasting or matching). Integrated buttons are usually high-quality plastic.
- Design: Ergonomically designed to provide a comfortable and secure grip, with precise contours and a diameter optimized for responsive steering feel. The “Nero” color and texture are chosen to seamlessly match the sophisticated interior of the GranCabrio and GranTurismo.
Driver Side Windscreen Wiper Arm
SKU:
80355900
$145.00
- Type: This part number refers to the complete mechanical arm located on the driver’s side of the vehicle, which connects the wiper motor linkage to the wiper blade. It is specifically designed for the left-hand side of the windshield as viewed from the driver’s seat.
- Function: The primary functions of the driver side windscreen wiper arm are crucial for effective windshield clearing and driver visibility:
- Blade Support: Provides a rigid and stable mount for the wiper blade, ensuring it remains in contact with the windshield surface.
- Motion Transfer: Transmits the oscillating motion from the wiper motor and linkage to the wiper blade, moving it across the windshield.
- Pressure Application: Contains an integrated spring mechanism that applies consistent downward pressure to the wiper blade, ensuring optimal contact with the glass for streak-free wiping.
- Aerodynamic Design: Often designed with an aerodynamic profile to minimize lift and maintain blade contact at higher speeds.
- Components: The wiper arm assembly typically includes the main arm structure, the pivot point/mounting spline that attaches to the wiper motor shaft, the articulated joint for the wiper blade attachment, and the internal spring mechanism. It does not include the wiper blade itself, the wiper motor, or the motor linkage.
- Location: Mounted on the cowl panel at the base of the windshield on the driver’s side, attached to the external shaft of the wiper motor’s linkage.
- Material: Primarily constructed from durable metals such as steel or aluminum, often painted or coated in a matte black finish for corrosion resistance and aesthetic integration with the vehicle’s exterior.
- Design: Precisely engineered in terms of length, sweep angle, and spring tension to match the specific curvature and dimensions of the Maserati GranCabrio and GranTurismo windshields, ensuring optimal wiping performance and even pressure distribution.
Engine Oil Pan
SKU:
234976
$83.00
- Type: A large, cast or stamped metal reservoir located at the very bottom of the engine, designed to collect and hold the engine’s lubricating oil when the engine is not running.
- Function: The primary functions of the engine oil pan are critical for the proper operation and longevity of the engine:
- Oil Sump/Reservoir: Acts as the main reservoir for the engine oil, ensuring a constant supply of oil is available for the oil pump to circulate throughout the engine.
- Heat Dissipation: Helps to dissipate heat from the engine oil as it cools after circulating through the hot engine components, contributing to maintaining optimal oil temperature.
- Protection: Provides a protective cover for the crankshaft, connecting rods, and other lower engine internals from road debris and minor impacts.
- Oil Return: Collects oil draining back from various parts of the engine.
- Drain Plug: Contains a drain plug at its lowest point for convenient oil changes.
- Components: Typically includes the main pan body, internal baffling (to prevent oil slosh during aggressive driving), and a threaded opening for the drain plug. It may or may not include the drain plug itself, or the oil level sensor, depending on the specific kit or factory assembly.
- Location: Bolted directly to the bottom of the engine block, forming the lowest point of the engine.
- Material: Often constructed from cast aluminum for good heat dissipation and rigidity, or stamped steel for durability and cost-effectiveness. The choice of material depends on the engine’s design and performance requirements.
- Design: Precisely engineered to conform to the shape of the lower engine block and clear surrounding chassis components. Its internal baffling is crucial for maintaining oil supply to the oil pump, especially during high-performance driving where cornering forces can cause oil to slosh.
Power Brake Booster Assembly
SKU:
209079
$1,000.00
- Type: A vacuum-assisted or hydraulic-assisted device that multiplies the force applied by the driver to the brake pedal, thereby reducing the effort required to engage the brakes. It is an integral part of the vehicle’s hydraulic braking system.
- Function: The primary functions of this power brake booster assembly are critical for vehicle safety and driver comfort:
- Brake Pedal Assist: Utilizes engine vacuum (or hydraulic pressure in some systems) to amplify the force exerted on the brake pedal, making it significantly easier for the driver to achieve effective braking.
- Braking Force Multiplication: Converts a relatively small amount of pedal force into a much larger force applied to the master cylinder, which then pressurizes the brake fluid to activate the calipers.
- Consistent Braking: Helps to provide a consistent and responsive brake pedal feel across various driving conditions.
- Components: Typically consists of a large, circular canister (often black) containing one or more diaphragms, check valves, and a pushrod that connects to the master cylinder. It will have a vacuum hose connection (for vacuum boosters) and mounting points to the firewall and the brake pedal linkage. The “assembly” often implies it comes ready for installation, possibly including minor seals or gaskets. It does not include the master cylinder itself, brake lines, or brake calipers.
- Location: Mounted on the firewall in the engine compartment, directly in front of the driver, between the brake pedal and the master cylinder.
- Material: Primarily constructed from steel, with durable rubber diaphragms and seals, engineered to withstand vacuum pressure (or hydraulic pressure), temperature fluctuations, and long-term use.
- Design: Precisely engineered to integrate with the specific brake pedal ratio and master cylinder of the Maserati GranCabrio, GranTurismo, and Quattroporte models, ensuring optimal braking feel, response, and performance for these high-performance vehicles.
Shock Absorber Kit
SKU:
82503200
$254.00
- Type: This part number refers to a kit containing one or more shock absorbers (dampers), which are crucial components of the vehicle’s suspension system. For the Maserati GranCabrio, this kit is likely designed for either the front or rear axle, or potentially a specific corner (left or right). Given the nature of a “kit,” it might include necessary mounting hardware, bushings, or boots, in addition to the primary shock absorber unit.
- Function: The primary functions of this shock absorber kit are vital for the vehicle’s ride comfort, handling, and safety:
- Dampening Oscillations: Controls the compression and rebound cycles of the suspension springs, preventing excessive bouncing and maintaining tire contact with the road. This is their core function.
- Ride Comfort: Absorbs road imperfections, bumps, and vibrations, providing a smooth and comfortable ride for occupants, a hallmark of Maserati vehicles.
- Handling & Stability: Maintains vehicle stability during cornering, braking, and acceleration, reducing body roll and dive/squat. This is crucial for the GranCabrio’s sporty dynamics.
- Tire Contact: Ensures optimal and consistent tire contact with the road surface, which is critical for braking effectiveness, steering response, and overall vehicle control.
- Safety: A properly functioning shock absorber system is essential for maintaining vehicle control, especially during emergency maneuvers or on uneven terrain.
- Components: The kit will include the primary hydraulic or gas-pressurized shock absorber unit. Depending on the kit’s specific contents, it may also include:
- Upper and/or lower mounting bushings
- Dust boot/cover
- Bump stop
- Associated nuts, bolts, or washers
- (It does NOT typically include the suspension spring itself, or other major suspension arms/links, unless explicitly stated as a full coilover assembly, which is less common for “absorber kit”).
- Location: Integrated into the front and/or rear suspension assemblies, typically positioned vertically between the vehicle’s chassis and the wheel hub assembly.
- Material: Constructed from high-grade steel for the cylinder body and piston rod, with precision-machined internal components and high-performance hydraulic fluid or gas. Seals are made from durable, temperature-resistant elastomers.
- Design: Precisely engineered and tuned by Maserati to match the specific weight, dynamics, and performance characteristics of the GranCabrio. This includes specific valving and damping rates to achieve the desired balance of comfort and sporty handling, crucial for an open-top grand tourer.
Steering Lock Module
Parts, Driving Controls, All Categories, Steering Column And Steering Wheel Unit (Available With: Special Edition)
SKU:
267179
$195.00
- Type: An electromechanical security device that, when activated, mechanically locks the steering column, preventing the steering wheel from being turned. It works in conjunction with the vehicle’s immobilizer system and ignition switch to deter theft.
- Function: The primary functions of this steering lock module are critical for vehicle security:
- Anti-Theft Deterrent: Physically locks the steering column when the ignition is off and the key is removed (or the vehicle is shut down), making it impossible to steer the vehicle without authorization.
- Vehicle Security System Integration: Operates as part of the vehicle’s immobilizer system. It typically receives a signal from the Body Control Module (BCM) or Immobilizer Control Unit, which authenticates the vehicle’s key before the steering lock is disengaged and allows the engine to start.
- Security for Keyless Systems: For vehicles with keyless go systems, it provides the physical security mechanism that replaces a traditional mechanical steering lock.
- Components: Typically consists of an electric motor, a locking pin mechanism, internal gears, and an integrated electronic control unit (ECU) that communicates with other vehicle modules. It is a sealed unit designed for a specific mounting position on the steering column. It does not include the ignition switch/module or the key itself, but rather interacts with them.
- Location: Mounted directly on or within the steering column assembly, usually near the ignition switch or steering shaft.
- Material: Constructed from durable metals for the housing and locking pin, with robust plastic and electronic components internally, designed for security and reliability.
- Design: Precisely engineered to securely engage with a specific part of the steering shaft, providing a strong mechanical lock. Its electronic components are programmed to communicate seamlessly with the Maserati’s complex security and ignition systems.
Steering Rack Assembly (LHD)
SKU:
321591
$2,934.00
- Type: A complete steering rack and pinion assembly, which is the core component of the vehicle’s steering system. For these Maserati models, it is typically a hydraulic power steering rack, meaning it uses hydraulic fluid pressure to assist the driver’s steering effort. The “LHD” designation is crucial, indicating it is designed for vehicles where the driver sits on the left side of the car. The “M139HL” reference in the part description points to its compatibility with the specific chassis and steering system architecture found in the GranTurismo/GranCabrio (which share some heritage with the M139 Quattroporte).
- Function: The primary functions of this steering rack assembly are fundamental to vehicle control, driver feedback, and safety:
- Translates Steering Input: Converts the rotational motion of the steering wheel into the linear (side-to-side) motion required to turn the front wheels via the tie rods.
- Power Assistance: Provides hydraulic power assistance, significantly reducing the effort required by the driver to turn the steering wheel, especially at low speeds or during parking maneuvers.
- Road Feedback: Transmits sensory information from the road surface back to the driver through the steering wheel, providing crucial feedback on traction, road conditions, and vehicle behavior.
- Steering Precision: Engineered for high precision and minimal play, ensuring accurate and responsive steering, vital for a performance-oriented vehicle like a Maserati.
- Components: A complete steering rack assembly typically includes:
- The rack gear (a linear rod with teeth)
- The pinion gear (which meshes with the rack)
- The rack housing
- Internal hydraulic power steering components (valves, pistons, seals, fluid passages)
- Power steering lines connection points
- Inner tie rod ends (often directly integrated or attached with protective boots).
- Mounting points for attachment to the vehicle’s subframe.
- It generally does NOT include the outer tie rod ends, power steering pump, reservoir, or fluid.
- Location: Mounted horizontally, typically behind the engine or suspension crossmember, between the front wheels. The steering column connects to the pinion gear, and the tie rods extend from the rack to the steering knuckles.
- Material: Constructed from robust materials like cast iron or aluminum for the housing, and hardened steel for the rack and pinion gears, designed to withstand immense forces, provide durability, and maintain precise tolerances.
- Design: Precisely engineered and calibrated to the specific steering ratio and hydraulic assist requirements of the Maserati GranCabrio and GranTurismo. The “LHD” specific design ensures correct pedal and steering column alignment for left-hand drive markets.
Steering Wheel Voice Switch Kit
Parts, Driving Controls, All Categories, Steering Column And Steering Wheel Unit (Available With: Special Edition)
SKU:
980139788
$477.00
- Type: A specific kit containing the button(s) and potentially associated wiring or mounting hardware located on the steering wheel, designed to activate the vehicle’s voice control system.
- Function: The primary functions of this Steering Wheel Voice Control Switch Kit are centered on driver convenience and safety:
- Voice Command Activation: Allows the driver to quickly and easily activate the vehicle’s voice recognition system by pressing a dedicated button on the steering wheel.
- Hands-Free Operation: Enables control of various infotainment and vehicle functions (e.g., making phone calls, navigating, changing radio stations) using voice commands, thereby minimizing driver distraction and promoting safer driving.
- Seamless Integration: Designed to seamlessly integrate with the vehicle’s existing multi-function steering wheel and infotainment system.
- Components: The kit typically includes the specific plastic switch unit with the voice command button (often marked with a microphone icon or a talk bubble), and potentially a small section of wiring harness or connectors necessary for installation. It does not include the entire steering wheel, airbag module, or other steering wheel buttons.
- Location: Integrated into one of the spokes of the multi-function steering wheel, usually on the left or right side, designed to be easily reachable by the driver’s thumb.
- Material: High-quality automotive-grade plastic for the switch housing and button, with durable internal electronic contacts, designed for tactile feedback and longevity.
- Design: Ergonomically designed to be easily identifiable and activated by touch without requiring the driver to look away from the road. The button’s finish and labeling are consistent with the luxurious interior of the Maserati.
Wheel Bearing
SKU:
197118
$731.00
- Type: A precision-engineered component that allows the vehicle’s wheel to rotate smoothly with minimal friction while supporting the entire weight of the vehicle and enduring significant forces (radial, axial, cornering). For these Maserati models, this part number typically refers to a complete wheel bearing assembly, which often includes the bearing unit itself and sometimes an integrated hub or mounting flange. It is typically a sealed unit, designed for long-term, maintenance-free operation.
- Function: The primary functions of the wheel bearing assembly are critical for vehicle dynamics, safety, and ride quality:
- Smooth Rotation: Enables the wheel to rotate freely and silently around the axle.
- Load Support: Bears the entire static weight of the vehicle and dynamic loads generated during driving (braking, acceleration, cornering forces).
- Steering & Handling: Maintains the precise alignment of the wheel, which is crucial for accurate steering response and stable handling.
- Reduced Friction: Minimizes friction during rotation, improving fuel efficiency and reducing heat generation.
- ABS/Traction Control Integration: Often incorporates the reluctor ring or magnetic encoder for the ABS (Anti-lock Braking System) and Traction Control system, which transmits wheel speed data to the vehicle’s control modules.
- Components: A typical sealed wheel bearing assembly for these applications includes:
- The bearing itself (e.g., a double-row ball bearing or tapered roller bearing)
- Integrated races and seals
- Often, an outer flange or hub that bolts directly to the suspension components and where the wheel is mounted.
- It does NOT typically include the wheel hub nut, brake rotor, or wheel studs unless specified as a complete wheel hub and bearing kit.
- Location: Integrated into the wheel hub assembly at each corner of the vehicle (front and/or rear axles, depending on the specific application for this part number, which is generally universal for a given axle type on these platforms).
- Material: Constructed from high-strength, hardened steel alloys for the races, rollers/balls, and inner/outer rings, designed to withstand extreme loads and high rotational speeds. Seals are made from durable rubber or composite materials.
- Design: Precisely manufactured to extremely tight tolerances to ensure minimal run-out, optimal concentricity, and long service life, crucial for the performance and refinement expected of a Maserati.
Windscreen Wiper Blade Set Assembly
SKU:
80065800
$458.00
- Type: This part number refers to a complete set of windscreen wiper blades, typically including both the driver’s side and passenger’s side wiper blades, designed for direct replacement on the original wiper arms. These are specialized blades engineered to fit the specific curvature and dimensions of the Maserati GranCabrio and GranTurismo windshields.
- Function: The primary function of the windscreen wiper set assembly is critical for driving safety and visibility in adverse weather conditions:
- Clear Visibility: Efficiently removes rain, snow, sleet, dirt, and debris from the windshield surface, ensuring a clear and unobstructed view for the driver.
- Optimal Contact: Designed to maintain consistent pressure and optimal contact across the entire windshield, providing streak-free wiping.
- Reduced Noise: Engineered for quiet operation, minimizing squeaking or chattering during use.
- Components: The set typically includes two individual wiper blades (one for the driver’s side, one for the passenger’s side), complete with their integrated aerodynamic frames and rubber wiping elements. They feature the specific attachment mechanism required for the GranCabrio and GranTurismo wiper arms. It does not include the wiper arms themselves or the wiper motor.
- Location: Mounted on the exterior of the vehicle, attached to the wiper arms that pivot across the front windshield.
- Material: Consists of a durable steel or composite frame, often with an aerodynamic spoiler, and a high-quality, long-lasting rubber or silicone wiping element. The rubber compound is specifically formulated to withstand UV exposure, temperature extremes, and various contaminants.
- Design: Precisely contoured and sized to match the unique curvature and dimensions of the Maserati GranCabrio and GranTurismo windshields, ensuring maximum contact area and efficient wiping performance at all speeds.